Related
hi
i have i-mate with bootloader 1.01, i was going to use chines WM2003 SE rom update by SD card, after putting SD and do flashing it says "failed" then i did a hardrest, and now i cant get bootloader screen...... i think my device gone be junk
plz help me if there anyway to reback it to life
thanks alot
hi nightmare,
that's really one SORRY situation. like a nightmare.
i know, cause it happened once to myself.
so, could you please describe what exactly happened, what is your XDA2 behavior now, can you connect with terminal, is the LED on while connected to charger or cradled...
i mean everything.
buzz
when i plug the device into charger there is no power LED, plus i pressed (power button + any directon + rest) and nothing apper (not even bootloader)
plz help me to get it work again.....
best regards and wishes
nightmare
...something similar happened to me. unfortunately i was not able to fix it myself.
so i sent it to repair. it was repaired under warranty...
interesting is, that they fixed it very quickly without even opening it.
there must be a way to do it... but how...
try to ask itsme from this forums...
maybe there is a way to boot it over eboot and upload new bootloader or talk to it with direct serial cable
good luck
buzz
thanks alot buzz_lightyear
yah smae here i was thinking about buying serial cable,,,,, :roll:
thanks for telling me it did happen to u lol
yeah...
it hapenned to me because i was trying to port W2kSE to XDA2 and i did forget to remove 2.06 bootloader out of the flash file...
as i said, try asking itsme. he knows probably the most here...
buzz
Dead XDAII with no screen
I have a situation like that before, goto http://forum.xda-developers.com/viewtopic.php?t=13651
Hope you get to recover your XDAII
Could anybody advice is there any way to save my XDA which went dead after an Wallaby upgrade with other PPC ROM using XDArit ? It's now got stuck with white screen when power reset, not booting, no response when connecting back to USB port to my PC. Anyway to reflash the correct Wallaby again ? Please help!!!
replacing the mainboard is the only solution.....
Oh my god, I just adopted this new baby 3 days ago from my friend, and now I've killed it. I feel so guilty about it. God bless it!!! Any other suggestions are deeply appreciated.
liusam said:
Oh my god, I just adopted this new baby 3 days ago from my friend, and now I've killed it. I feel so guilty about it. God bless it!!! Any other suggestions are deeply appreciated.
Click to expand...
Click to collapse
If you could find someone to help you replace the ROM (2 x Intel 128J3A)
I could give you a pair of ROM for US$ 30
liusam said:
Could anybody advice is there any way to save my XDA which went dead after an Wallaby upgrade with other PPC ROM using XDArit ? It's now got stuck with white screen when power reset, not booting, no response when connecting back to USB port to my PC. Anyway to reflash the correct Wallaby again ? Please help!!!
Click to expand...
Click to collapse
Are you able to enter the bootloader by pressing power button and doing a soft reset?
Then you should be able to reflash your device via SD-Card....
HTH
Stefan
I tried hard reset also, it didn't help at all, only white screen comes up. I found I mis-used the ET180 bootloader instead of the 5.15 for 686, the bootloader is definitely gone.
Kitngan....is it hard to change the ROMs, like what it described in this forum, using the Microwave Oven to melt it ? I think this is just too risky.
Do you know how to change it ?
Thanks
got stuck on o2 splash screen. don't know what happend and what to do.
got any tips?????
thanks
Do a hard reset -> press the power button and the reset button at the same time
i've done it already and still hangs...
Reflash the rom with one from your original operator. If you're using an o2 xda please download a rom from www.my-xda.com and follow the on screen instructions.
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset button SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
sorry, forgot to mention, yes its himalaya.
ok, i will try all your advices
thanks a lot
rago,
thanks for the tips, it worked.
ur always welcome bro
good to know that u have ur device back
RAGo, I did the same, and it said MODEL ID ERROR. How to fix that? Mine is now WM2005.
hi prd00...
replace the HimaUpgradeUt.exe in ur upgrade folder with the attached file,u will bypass country ID error...
good luck
RAGO :lol:
Hi all,
I think I need help from you guys. I have my xdaII dead with screen showing bootloader(it turns to USB when i plug into usb port). after I followed the instructions above...it shows model ID error. Please help....
problem solved
sorry guys...i forgot to use the given attachment file...thanks a lot.
Special thanks to RAGOv. your tips is worked.
splash
good day.
i have similar problem. it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install teh ARABIZER.
thank you.
splash
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
dead XDAIIS (in bootloader mode) please help..
Dear Guys,
My XDAIIs is in bootloader mode (it shows serial--> at top and V 2.07--> at bottom, and doesnt turn to usb when i plug into my usb port). Does anyone know how to fix it? Please help....
hi ordinary...
haven't u said it worked!!!so what happened next???!!
plz explain more,for the mean while try changing the USB port ur using,check ur cable,and try to change the computer(desktop/laptop)...
if it doesn't work plz explain more what happened,so we can help u find the solution...
@arcquisumbing:u are not clear in ur post my friend...what same problem(are u in bootloader mode???!!),how did it happened after installing item from the extended rom????and u want a solution for what???!!!
sorry i couldn't help u my friend but plz try to explain more so we can undestand ur problem...
RAGO :lol:
stuck in splashscreen
i'm sorry.
i was referring to the stuck in splash screen.
after the hard reset, autorun was initiating installations for the contents of the extrom. i installed each and every item and at the end of it, it required resetting. i just clicked on yes to reset, then when it did, it just stops at the splash screen. i tried waiting for an hour or so, maybe it would just come, but still to no avail. i tried re-installing everything, but still the same thing. but when i tried NOT TO INCLUDE the ARABIZER, everything worked just fine.
now, i'll just pray for two things, 1-that you can help me solve this problem, and 2-that the light at the end of the tunnel is not a train.
thanks. more power to you.
hi arcquisumbing
now if u still have a 2003 OS on ur device,wich i doubt it,(i've read ur post in the thread How can I increase Storage memory in WM 2005),then ur problem can be solved inchallah :wink:
*if ur device is i-mate,do the following:
1-remove arabizer from Ext ROM,so ur device can enter OS
2-install arabizer cabs after being in the OS
download arabizer cabs from here http://forum.xda-developers.com/download.php?id=6292
*if ur device is not an i-mate,then u have to wait untill my no brand arabizer succeeds.... :wink:
RAGO :lol:
Re: splash
arcquisumbing said:
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
Click to expand...
Click to collapse
Hey bro since you have an Imate! Download this file from clubimate http://www.clubimate.com/support/PPC/ROM/RUU172810WWE_CDL_SKU2.exe and flash it.
I'm sure your problem will be solved for sure
Ps : RUU172810WWE_CDL_SKU2.exe is just the Arabic Extended Rom
dead XDAII and XDAIIs
Hi RAGOv,
THank you for your willingness to help my problem
1. The one I said worked is for my xdaII, but only to pass the MODEL ID error (it runs well, after i use your attachment file. I upgrade it to O2 ROM upgrade 1.66 WWE). However, After finish upgrading, It still stuck on O2 splash screen.
2. Now, Im facing the other thing. "the dead XDAIIs". Its screen only appear O2 splash screen when i put on the battery(even i already did a hard reset). Then I tried to change mode into bootloader mode (by pressing power button, record, and reset).in the end, after I did an upgrading. it also stucks on O2 splash screen.
Please help...I dunno what to do anymore..
Dear User Here,
i'm a new user here and i just ubgrade my x7500 to AP4, really its fantastic rom, many thanks to Athena Project Team, but i have some problem cant fix it,
1- main clock always change from GMT+2 Cairo to GMT+2 Windhoek.
2-i cant found any options for HTC HOME
3- Bluetooth Explorer always go hidden from file explorer
4-always miss all file in MicroDrive
5- i have radio 1.5 its necessary to ubgrade to radio 1.57??????
Please can u help me in this problems
aa_talaat_aa said:
Dear User Here,
i'm a new user here and i just ubgrade my x7500 to AP4, really its fantastic rom, many thanks to Athena Project Team, but i have some problem cant fix it,
1- main clock always change from GMT+2 Cairo to GMT+2 Windhoek.
2-i cant found any options for HTC HOME
3- Bluetooth Explorer always go hidden from file explorer
4-always miss all file in MicroDrive
5- i have radio 1.5 its necessary to ubgrade to radio 1.57??????
Please can u help me in this problems
Click to expand...
Click to collapse
I have moved from that rom a long time now....I would think you should too, but in anycase that is up to you. I would suggest you upgrade your radio though...saves power.
lennie said:
I have moved from that rom a long time now....I would think you should too, but in anycase that is up to you. I would suggest you upgrade your radio though...saves power.
Click to expand...
Click to collapse
many thanks for replay, but really i dont care for any problems right now,
just one big problem i have now...that microdrive always miss my files..
please please if u know any solution for this tell me..just this problem please
aa_talaat_aa said:
many thanks for replay, but really i dont care for any problems right now,
just one big problem i have now...that microdrive always miss my files..
please please if u know any solution for this tell me..just this problem please
Click to expand...
Click to collapse
do a search for a thread on formatting the microdrive
it has a discussion about this problem and how to treat it
Please help
I own a htc Athena x7500, AthenaUnlocker use to unlock the 2nd step and gave me as a valid will restart and stayed black screen. No lights or recognize usb connection.
I tried to do a hard reset but nothing ... just turn on the green and falls neither so the screen remains black and the pda seems dead.
Please help
Thank you very much
please help me aain
Please i need your help,
I have htc advantage x7500, and I unlock it with unlocked tools, i upgrade it to ap4, it was work perfectly....but have one big problem that micro drive always miss data, but I don’t care for that and bought 8g memory card,
but after 2 weeks work in ap4 and suddenly the x7500 hanging and lose all contact and all message, i try soft & hard reset but not useful, am trying to downgrade to original rom but after downgrade the device hanging to and do many restart,
Now I take it to warranty and they told me that I tiring to unlock the SPL and they will try to lock it again but may be I lose the motherboard.
Now I don’t know what can I do. And I need your advice
Please please help me please...
aa_talaat_aa said:
Please i need your help,
I have htc advantage x7500, and I unlock it with unlocked tools, i upgrade it to ap4, it was work perfectly....but have one big problem that micro drive always miss data, but I don’t care for that and bought 8g memory card,
but after 2 weeks work in ap4 and suddenly the x7500 hanging and lose all contact and all message, i try soft & hard reset but not useful, am trying to downgrade to original rom but after downgrade the device hanging to and do many restart,
Now I take it to warranty and they told me that I tiring to unlock the SPL and they will try to lock it again but may be I lose the motherboard.
Now I don’t know what can I do. And I need your advice
Please please help me please...
Click to expand...
Click to collapse
First problem
see this thread found with search function http://forum.xda-developers.com/showthread.php?t=496566&highlight=format+microdrive
Second problem did you do a hard reset after flashing the rom?
HTC always try the broken motherboard line but it is not true.
The problem was you tried to flash an SPL 1.2 rom instead of a SPL 3.5 rom
This is called the endless loop problem
do a search, the answer has been given many times.
Oh and don't post the question 5 times, people get annoyed and wonder why you didn't try the search function
many thx for your replay
lakeman said:
First problem
see this thread found with search function http://forum.xda-developers.com/showthread.php?t=496566&highlight=format+microdrive
Second problem did you do a hard reset after flashing the rom?
HTC always try the broken motherboard line but it is not true.
The problem was you tried to flash an SPL 1.2 rom instead of a SPL 3.5 rom
This is called the endless loop problem
do a search, the answer has been given many times.
Oh and don't post the question 5 times, people get annoyed and wonder why you didn't try the search function
Click to expand...
Click to collapse
Dear Lakeman,
i think that you dont understand me, and this for my bad english, am very sorry for this,
but really i'm in big trouble here, and i thing that i do successfully ubgrade to ap4 because my divice was work perfectly for 1 week, calling, games, songs, video, gps, office....alll.
just i bought memory card 8 gb, and it was work good to, but i try to format it IN W7 in fat32 but i change the "Allocation unit size" to 64 kilobytes and enter it to device and suddenly hanging, i do soft and hard reset, work to the end and after windows mobile work also hanging and touch screen not work.
now i come back to official wm6 and official spl but the problem still on touch screen.
that is all till now my dear.
sorry again for my bad english and many thanks for your help
aa_talaat_aa said:
Dear Lakeman,
i think that you dont understand me, and this for my bad english, am very sorry for this,
but really i'm in big trouble here, and i thing that i do successfully ubgrade to ap4 because my divice was work perfectly for 1 week, calling, games, songs, video, gps, office....alll.
just i bought memory card 8 gb, and it was work good to, but i try to format it IN W7 in fat32 but i change the "Allocation unit size" to 64 kilobytes and enter it to device and suddenly hanging, i do soft and hard reset, work to the end and after windows mobile work also hanging and touch screen not work.
now i come back to official wm6 and official spl but the problem still on touch screen.
that is all till now my dear.
sorry again for my bad english and many thanks for your help
Click to expand...
Click to collapse
OK
sequence of events:
flashed AP4 and everything was working for 1 wk
Microdrive started playing up
Touch Screen started playing up
Flashing different roms did not change this behaviour
These things happened after using a new memory card.
An alternative explanation would be that you have damaged your hardware
Did you drop the phone ?
lakeman said:
OK
sequence of events:
flashed AP4 and everything was working for 1 wk
Microdrive started playing up
Touch Screen started playing up
Flashing different roms did not change this behaviour
These things happened after using a new memory card.
An alternative explanation would be that you have damaged your hardware
Did you drop the phone ?
Click to expand...
Click to collapse
NOOOOOO, never, i didnt drop it....
do u mean that i lost my phone now?? and i cant fix it anymore????
and if i cant fix it with any softwear, can HTC replace it or fix it with unofficial SPL??????
please answer me ASAP, this is my msn
[email protected]
After you upgrade to AP4, which rom you install ? 6.5 or 6.1 rom
hello folks,
first off thanks to all the people who help make this forum better and better.
have used you're help a few times especially trying to flash a rom. but now there's a problem... I've installed artemis Rom a couple of times but I wanted the newest so I've downloaded it, flashed my hd2 with task29 like always. pressed vol. down button it restarted until white boot screen. ok, possible, so I reset it and press vol. down again. but still white boot screen. after trying it for 70(!) times. I used the forum. saw that maybe hooking it up to pc and starting custom rom .exe should work. but no. wont even start when hooked to a computer. so please help!
Info:
Cotulla hspl 1.42.00
Task29 by dooloop performed( got stuck after that)
Rom Artemis. 31.5 (current) 35.1 (wanted to install.
Thanks In Advance
Maajelvv
Two possibility's;
Tray to do a hard reset,
Ore tray to install Stock Rom!
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
I'm out off Idea; tray to send Sir Sternas a PM with your question, maybe he get some Ideas; ore tray to ask this question on the Artemis Thread, there are also helpful peoples out there!
Edit; I just add your question on the Artemis thread!
http://forum.xda-developers.com/showthread.php?p=8450678#post8450678
you haven't made hard reset. if you wont to do hard reset you have to press both volume buttons and then pres power buton ( or press red button near batery ).
also try to make a goldimage ( search the forum ).
regards
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
As Luka1111 said, you haven't done a hard reset. Check this out:
http://www.smartphonegurus.com/forums/topic/8829-hd2-how-to-soft-reset-hard-reset-and-place-in-bootloader-mode/
Dmm;
That I didn't see/read it correctly the way he did a hard reset??
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
What´s the size of your SD-Card? Flashing from SD works only with max. 8 GB - Card, 16 GB or more won´t work! (Own experience!)
Can you connect your device to ActiveSync? Or otherwise stated: What happens when you connect your device to your PC? Does ActiveSync or Windows Mobile Device Center even startup?
BTW, what happens when you start your device now? Does it hang or just load your old Artemis version??
regards, Kuzibri
uli71 said:
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Click to expand...
Click to collapse
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hey guys,
maybe you haven't read my whole posting: Have you tried to get access to tricolor bootloader without pluged in SIM and SD?
If you had trouble with your answer button before flashing, is it possible your volume button is also without function? Therefore it seems to be a hardware problem.
Sorry, if this is not the answer you would like to read, but the advise to test without pluged in SIM and SD is my last. Entering bootloader is a basic system feature, as far as I know.
Best regards,
Uli
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hi,
I have send you a PM. Please read this ASAP!!
regards, Kuzibri
Hey Uli,
I've tried both. with and without sim or SD cards. still no functioning....
I've thought about the fact that it might be broken but it worked right before flashing....
thanks for your efforts though..
Maajelvv
As I already mentioned, this poor guy has a major problem with his device, which seems to be hardware related (either volume down button does not work or the on/off key). After having extensive contact with him by phone, the only solution seems to be to bring it back to the store to let it repair. Unfortunately, he will have a great chance to loose his warranty, because HTC probably will be able to found that there is another ROM installed. Whish Maarten good luck with his problem!! Also very sorry I could not help you to solve your problem. I'm personally very disappointed by that!
regards, Kuzibri