I have a Unit PW10B1 T-mobile stuck on the T-mobile boot screen, anyway I found out “GSM ERROR” in the boot loader, any suggestion or a way to fix it, I have a working o2 mobile, I’m not aware of the battery I could replace it from the other unit and recharge it…so pls give me feedback it’s very important to me, thank you.
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Biso007 said:
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Click to expand...
Click to collapse
Hello Biso, I can't access the device through the active sync, I tried Hard reset as well same problem the Unit stucks on the boot screen and the light flashes every like 5 seconds... about the repair center here in leb it's impossible there's no techis could solve this problem.. Isn't another way to do something to this unit ?
Unfort. NO, I couldn't find anyway to flash the RSU through SD ... the only option if you can pass the boot screen is to copy the RSU upgrade 4 files through SD card to the \windows\starup directory and soft rest
I'll try to get in I have nothing than just to let this unit works : :roll:
Anyone here consider to say something here for help ?
I'm still stuck thus I tried the Volume buttom to enter the today screen no luck as well ,but I noticed there's an Infrared connection btw my pc and the xda but active sync cannot connect to it, But I could send a files to the Xda like now am sending a .cab file I know it's not gonna make any diffrence but still maybe someone consider some help here.........
Someone would like to help here ?
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
cruisin-thru said:
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
Click to expand...
Click to collapse
Thank you cruisin-thru.. :roll:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
LumpiStefan said:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
Click to expand...
Click to collapse
Yes I could transfer any file I want to the Xda but still I can't do anything to it I can't reach it thus it's not an auto installer... Thus the screen is freezed on the T-mobile image, I tried the Volume buttom to enable the today screen still no luck as well :?
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
LumpiStefan said:
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
Click to expand...
Click to collapse
I had that auto installer file I copied it to an SD an prepared it to do that, anyway I hadn't tried it on that device later on I plugged it in my working XDA and the show begun by installing the RSU ON MY WORKING DEVICE :evil: I removed quickly the SD ,Installation stuck on 1% I went back to the start up folder and deleted the files :roll: lol I don't wanna tell you how much it feels it's like your seeing your baby dying infront of your eyes and you can't do anything about it,at the end It's still alive breathing, working properly :wink: beware guys of the RSU issue it's really horrible it might get ur device in the tombs..
Related
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
s3V3n said:
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
Click to expand...
Click to collapse
Have you tried a hard reset?
Are you sure, you do not have an hardware problem? Normaly you enter the bootloader by pressing power button and making a soft reset. Maybe this switch is blockated by anything....
HTH
Stefan
yes i don´t think its a hardware problem because nobody touched it during the week of my holiday but i´ll go to the shop tomorrow looking they will say
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
please can any one tell me how to fromat Qtek 1010?? thanks in advance
XDA won't start
Dear forum users,
I own a XDA I, which is sold as PCT 206 in Turkey. The original OS is ppc 2002
I also have the same problem on my XDA 1. I used up the battery to the end and after plugging the charger I got the bootloader screen.
At that time a had a cooked rom ppc 2003.
I tried to flash from SD to the original ppc 2002 but I still get the bootloader after soft and/or hard resetting.
Does somebody have an idea.
Best regards.
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
same trouble
cruisin-thru said:
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
Click to expand...
Click to collapse
i have same problem, after i upgrade from SD card and after i gave a cold boot machine start with TMOBILE logo and: 4.0.1.16, R6.25.02, G324e4...
by the way... i have no more access to setup options at start... any idea about how to fix this?
Is there a way to access to RAM using IR or USB without init windows CE thanks a lot
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
cruisin-thru said:
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
Click to expand...
Click to collapse
thanks for your response, i did it fix unsuccesfully. I have no access to test menu (before i had in fact but i kill it ). Can you tell me how can i write the bootloader into the wallaby, maybe with a jtag, or maybe with a byteblaster cable, i don't know too much in thius kind of themes but i have to... Actually i'm trying building a serial cable and i pretend use tty application to try to use an terminal pda in the computer.
Excuse for the english, is not my native language.
any solution
;740211 said:
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
Click to expand...
Click to collapse
i am having this same problem ... i have a T-Mobile and it is stuck on Ozone screen i can run the bootloader but it allows only tests...
can anyone tell me a solution ?
if a valid rom is put on the sd card the right way entering bootloader auto update the rom
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
Hey guys!
I know this topic really dosn't belong here, but i know that the guys in this forum has much knowlegde so i am trying here!
I have this HTC Hurricane phone, and yes i have asked there but no one seems to be able to help, and then i wanted to flash WM6 on it. For that i needed another SPL, which i got from there and flashed it. The flash it self went fine
But for some reason now, the Hurricane can't do anything at all. I can't turn it on normally i just get a white screen after about 10 seconds after i press the power button. The same happens when i try to get to the bootloader (!), all i get is a white screen after about 10 seconds of nothing. When the device shows me this white screen i also can't get it to connect with my PC! The computer dosn't see it at all, not just active sync, but i do not get that windows xp sound when i plug in a usb device.
So, what can i do? Is this a really good example of a bricked device or what?
I hope you guys will accept that i write here. The Hurricane forum is as good as dead, and i know you guys here for your expertise!
~D
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
l3v5y said:
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
Click to expand...
Click to collapse
okay that was what i thinking too.. well since i got it very cheap i don't think i will spend any money on such operation.. i guess its quite many money?
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
Note that the prompt only comes up for a few seconds and then it will continue to enter the bootloader.
Click to expand...
Click to collapse
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
Iam lucky for that couse i actually have another hurricane that works! Thank you i will try this on friday or saturday and write back the status.. I hope you will check back..
Iam glad i can allways count on the people in here!
unbrick it
http://forum.xda-developers.com/showthread.php?t=292667
try the alphazero solution =) !!!!
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
I have just tried the method. But still i do not get anything, but i white screen. I checked that my ROM dump worked by the other phone. It does ask me if i want to install the rom, but on the bricked one, i do not get anything just that white screen
Guess thats it?
Then I think it is a good example of a bricked phone...
G4 rom dump?
Hi xda-members,
I wanted to know if it's possible to backup and restore a G4 device. On the wiki, it says i need a CID unlocked device.
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
l3v5y said:
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
Click to expand...
Click to collapse
Ok, on another tread. They said if you got an error while backing up you have a CID locked device. And i already have created a backup. So i think it should be fine.
Ok i have been trying to just get my phone to work not really looking into getting nething new for it right now but the other day i turned off my phone to charge it and then when i went to turn it back on it was stuck in the bootloader screen if im not mistaken (red green blue white bars) and i cant get it to boot up my phone i tryed useing the never brick method and i got a new spl but dont know what to do after this can someone please help thanks
"Never brick method"? Who's your source for ills and leaving you hanging? What new SPL and what are you attempting to achieve?
Use the Wiki link in my sig (also linked with a sticky thread at the top of the forum entitled 'NEED HELP?? LOOKING FOR GUIDES?? NEW?? Read the XDA-Wiki for the Titan before posting'.
Return back with what you've attempted and read if you still cannot resolve your problem.
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
marcus556 said:
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
Click to expand...
Click to collapse
So you are saying your phone is just stock rom and it did this?
Are you sure you have not messed with flashing anything?
what version does it say the SPL is?
you said you flashed an SPL? What version?
These things all need to be compatible versions. This can be fixed pretty easy, but the method to fix it depends on what you have done, and what versions of SPL, Radio, and Rom you had when it broke, and what Versions you have now.. and what you did to try and fix it.
Reply with accurate information and I'll tell you what to do to fix it.
Any method I give you may require an SD card thats less than 2GB and non SDHC. You'll need it formatted to fat32... do you have this?
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
maniakx said:
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
Click to expand...
Click to collapse
Thats pretty much it... but depending on the SPL it's got to be flashed with the right versions.... so once we know at LEAST what SPL, and hopefully the radio.. it'll be simple.
Also... What provider do you have? (sprint, verizon, etc...)
AND do you want DCD 3.2.6 or do you wanna stay with a stock rom.. I can help you either way.. no difference in ease to get it done.
marcus556 said:
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
Click to expand...
Click to collapse
marcus, you have start by demonstrating a motivation to help yourself.
Starting a thread with the rather ambiguously useless title of "Help" is already a big no-no.
Second, I have given you the links to the Titan Wiki that will explain what you are seeing and routes to go from there.
Third, people here can directly rehash info from other sources (such as the wiki or their own knowledge) but it's rather like shooting in the dark since you don't seem to be too concerned by helping yourself as you still haven't stated that you have bothered to read the forum's fundamental resources and return to specifically state where you are at.
Common upgrading problems explained and solved is found from the main page of the Titan Wiki under the heading of Problems and Questions
(!Pleeeease read here before posting on the Forum):
P: My device is stuck at the Red, Blue and Green Screen?
S: 1. To exit the bootloader, press the reset.
2. Connect your Titan to your PC's USB and then on your PC execute titan_exitbl.exe
3. You may need to reflash the Radio/Operating system ROM
Click to expand...
Click to collapse
From what you have described, those are the routes to attempt.
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
marcus556 said:
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
Click to expand...
Click to collapse
Sounds like it is a stock Verizon phone pre MR1. If you are not interested in free GPS then get the MR1 update from Verizon and run it with that boot screen on the phone connected via USB to your computer.
If you do want free GPS then follow the WiKi basically starting from scratch with a new phone. You could also try to hard reset the phone and see if it will come back alive as well.
Just to clarify, you can actually get third party GPS working on MR1 (see this thread).
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
i am starting to really hate this fing phone!!!!!!!!!
marcus556 said:
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
Click to expand...
Click to collapse
2.07 I believe is the "Locked" spl from Sprint or used with NueSPL relocker. If you want to flash the latest MR1 update from Verizon, I'm assuming, don't quote me on this, you can do it with this spl. You still may have to "Relock" it to 1.07 or below using Titan-Relocker, not NueSPL's version. What does your phone display now? Still 3 color?
the phone is displaying tita100 spl-2.07.0000 below that it says cpld-9 and at the top right it says ruunbh and where can i get the relocker at?
It's stuck in bootloader mode. Use the attached utility to "Unlock" the bootloader "MODE"
OR....
if you are going to flash to a custom rom... copy a TITAIMG.nbh file to your MicroSD card and hit reset.
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
marcus556 said:
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
Click to expand...
Click to collapse
Best steps to take....
Disconnect cable.
Get into bootloader mode.
Open activesync and uncheck the Allow USB Connections and Allow Connectsion to one of the following. Click OK to make sure it takes.
Then connect the USB cable.
When Bootloader says USB instead of Serial... then execute the titan_exitbl.exe
ok it didnt work i unplugged everything the cable from the computer the cable from the device and went into activesync and unchecked the boxs went back in to make sure they were unchecked they were then i plugged the cable up waited like you said for the usb and ran the file got the same message......thanks for your patients with me.......
by the way i dont know if u know this but it is stuck in bootloader i cant get into the phone at all so the micro sd card wont work
Hi all,
I have problem with HTC HD2 LEO
The problem is the operating system is not going up give me error
..\..\common\persistence\internal\winmfile.cpp:56
i have the sound control button is completely not working i need to make format(hard reset) i cant is any other way to do the format ?
i did try the phone shop to fix the phone volume key but every one saying they can't fo it :s
i was wondering if any one the professional developer they can make auto format for the mobile when attached into the SD active itself automatic like
autorun.
Many thanks for all try to help
Wael
I cant see anyone has the idea for the problem thank you very much for looking at the post
if any one knew any way for this can you write it in this post please and i will check it always .
If it was me I think the only thing i would even think of trying IF ITS STOCK rom and all. I would try to use the offical tmobile upgrade rom somehow. If you can plug it into the PC and the computer "knows its there" then I would try the offical tmobile rom. I hope you find a way to fix it. Good Luck
is any way i can connect the phone without windows mobile device centre ?
wa2el said:
is any way i can connect the phone without windows mobile device centre ?
Click to expand...
Click to collapse
The same thing is happening to me...I donr know how ...but I turn mt phone on and all of a sudden there was a message saying that there was an error and to push the up volume. To hard reset...and it did it by its self...cause my down volume. Doesn't work...so tthe phone knew it had a problem...I fixed it...loaded some of my mods...andvthe error now came bavk and I'm screwded once again...hoping that message will come back...I let it sit for hours and that's when it came on...???
hi again.
still i cannot find way to fix it but was wondering if some one has really good exprience in windows mobile can make patch for us to format the mobile auto run throw memory card it will be helpfull
Thanks in advance.
wa2el said:
hi again.
still i cannot find way to fix it but was wondering if some one has really good exprience in windows mobile can make patch for us to format the mobile auto run throw memory card it will be helpfull
Thanks in advance.
Click to expand...
Click to collapse
That wouldnt work cause we can't get to the home screen to the browser /internet to download anything...so we are screwed...