I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
198 views
58 downloads
0 replies!
no thanks guys
Fianlly a reply
I downloaded from the Imate site and have not had any issues yet. Will not have a chance to play with the new load till this weekend.
Dustoff
I also upgraded from club imate site, no issues so far looks good.
Hi, I make the upgrade.
It works fine.
The only problem is extended rom is locked.
Thanks Panja for uploading.
JoseF
the only difference with this version seems to be the removal of the text 'test only not for sale' in the bootsplash screen.
1.72 Upgrade
Thanks Panja for uploading the 1.72 rom. I just upgraded mine and it just took me an hour and nearly same time for adding some software. XDAII working fine. No Problems. Yet.
Cheers 8)
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Panja said:
I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
Click to expand...
Click to collapse
Installed, tested, all OK, looks very good, and better than the 1.66 ITA. witch have had problem with TOMTOM navigator, and with the new 1.72 goes all very very WELL!
Thanks for the upload!
Galactus said:
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Click to expand...
Click to collapse
Hey,
Try to understand this page and you will get it to work:
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Wow
Wow
A bit too much information for me I'm afraid.
I'm running the Imate version now and it's terrible: No gprs & monitor.
I've tried already to switch back to the original version from T-mobile, but I get the same country ID error as when I tried to install the Imate ROM.
To reverse this (as far as I understand) is not easily done I'm afraid!
The settings of the T-mobile ROM (RUU16036WWE_T-Mobile_NL.exe)
look correct if I vieuw the
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:
Re: Wow
Galactus said:
Wow
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:[/quote
Use ER2003edit to erase the phone ID and the county code. then apply your old update and you will be going. This worked for me to downgrade.
Click to expand...
Click to collapse
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
christianj said:
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
Click to expand...
Click to collapse
No problem.
Cheers
Panja
Phone is not ready
Does anyone come across such problem wtih this iMate 1.72.00WWE, that is when activate the phone program, select Tools --> Options..., a dialog comes up with message "The phone is not ready, Wait 15 seconds and try again." However, this never get away, every I select the same, it appears. Please Help.
So far, ive done 2 hardresets on 1.72.
Compared to 1 on 1.66 and 1 on 1.52.
Im really concerned about the stability of 1.72, doing the wrong thing with the wrong program can cause an instant hardreset!
I think I solve the problem now
umm... i cant upgrade.
ive tried about everything, and i always get country ID error.
Ive upgraded to 1.72 before (official), back then i erased the phone ID and
operator code.
So, i tought.. then it should be the same now.. but no, it aint.
I cant upgrade!!
Please help!
Just do it all over again, as you never upgrade the machine. I had do it, it works.
Yeah.. it worked with PH10, Qtek, and WWE.
thanx for the input!
Related
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Hi killercheung...
where are you find the 1.60 rom ?
and the radio what version is ?
Can you put it in my ftp pls ?
it's always on
ftp://dgmatic.com
user: xda
pass: xda
port: 21
...like this we can have it all
Thanks in advance
Denis
I asked here for you, hopefully it will be available for everyone soon:
http://www.ppcsg.com/forums/viewtopic.php?p=173744#173744
-arebelspy
killercheung, thanks for that... I'm still deciding whether to apply the new rom to my UK XDA II.... is the language of the rom netherlands? or can I have it all in english as it is with the normal O2 rom?
Do we lose anything from the o2 rom/extended rom ?
I'm wondering if O2 do bring an upgrade out if we'll be able to still use it if we've tried this t-mobile 1.60 rom.... hmmmmm
hmmm decisions decisions... do you think its much better than the current o2 rom?
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
satria said:
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
Click to expand...
Click to collapse
mind sending me a copy too ?
thanks in advance
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
killercheung said:
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Click to expand...
Click to collapse
Good news about the T-Mobile ROM. I don't know what they have fixed/patched, but my O2 XDA II ROM never bothered to disconnect the GPRS connection after having spent some time online, not after surfing, not after checking e-mail. Mind you the T-moblile ROM doesn't either, except ....... when checking e-mail, which in my eyes is quite important.
So now I can go back to have my XDA check my e-mail once per hour, knowing that it will disconnect automatically.
(And Satria, thanks for sending me my bubbles
@ ming:
check ur email. Also I've seen ur review at PPCSG forum. Great.
Regards,
satria
Hi,
Just one question. Did any of you that make the update testet with the bluetooth GPS?
If yes, It works? or you still have to install TOWA´s patch?
Regards
JoseF
Re: Some interesting things on the T-Mboile 1.60 update soft
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Hi guys,
I did the update to rom 1.60 and it is great. I have an Imate Pocet PC. the new rom is excellent but with one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well :twisted: :twisted: :twisted: :twisted: :twisted: i there a fix to this.
Thanks,
Gilbert
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
killercheung said:
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Click to expand...
Click to collapse
For NBF, you can use XDAtools to capture the Chinese ROM, I did once with the English ROM and the file size is exactly the same as the one in 1.60 update. So there should have no missing bytes in the saved file.
For the EXTENDED_ROM, no idea how to save in NBF format ..
I have installed the update but TomTom doesnt see the serial ports 4/5.
@axbl
Hi, What do you think about the update? It´s mutch better than before?
You say "TomTom doesnt see the serial ports 4/5."
Have you installd Towa solution?
Regards
JoseF
Gilbert said:
one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well
Click to expand...
Click to collapse
yikes...... did that happen on the old rom as well or did gprs stay connected on the original rom?
I hate the way gprs disconnects on devices.. it's supposed to be always on, and I'd really prefer if it stayed on during suspend etc so that MSN could stay connected, notifying me when I got a message....
Email checking likewise, I'd prefer gprs remained always connected and it'd check email in the background whether off or on, notifying me when it got a new mail.
I can't check the behaviour of my xda II since Im on "roaming" at the moment in another country so no gprs
but can anyone say for sure which way the old vs new rom work in this regard?
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
XDA developer Itsme said:
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
Click to expand...
Click to collapse
I get an error 403 forbidden when I try this link.. odd thing is it was working for me earlier..
-arebelspy
oeps. fixed now.
Hi can some one with a XDAII UK O2 please post there Extended ROM
please as i have erased mine.
Thanks
pjcltd said:
Hi can some one with a XDAII UK O2 please post there Extended ROM
please as i have erased mine.
Thanks
Click to expand...
Click to collapse
Check this out http://forum.xda-developers.com/viewtopic.php?t=4730
Hi PJC Ltd
I have done the same, so hopefully later today or tonight i will copy the files from a new UK o2 XDA-2 extended rom, i will post them on here tonight
John
cool thanks for the help i love this bit of kit
i did have a ipaq 5450 and a P800 saw this in our local shop
and i had to have it.
i have doen the rom upgrade to 1.6 but i need the O2 ext Rom files for a project that i am doing.
Thanks for your help
cool thanks for the help i love this bit of kit
i did have a ipaq 5450 and a P800 saw this in our local shop
and i had to have it.
i have doen the rom upgrade to 1.6 but i need the O2 ext Rom files for a project that i am doing.
Thanks for your help
Hi Paul
Looks like i did the same, I upgraded to the 1.60 and lost the o2 bits, so hopefully if we replace our extended roms with the files i pull off a new XDA2 later, and then hard reset we should have Ver 1.60 with the o2 settings
John
applecom said:
Hi Paul
Looks like i did the same, I upgraded to the 1.60 and lost the o2 bits, so hopefully if we replace our extended roms with the files i pull off a new XDA2 later, and then hard reset we should have Ver 1.60 with the o2 settings
John
Click to expand...
Click to collapse
Yes thats what i am thinking to
applecom said:
Hi Paul
Looks like i did the same, I upgraded to the 1.60 and lost the o2 bits, so hopefully if we replace our extended roms with the files i pull off a new XDA2 later, and then hard reset we should have Ver 1.60 with the o2 settings
John
Click to expand...
Click to collapse
Any luck with the files?
10 mins, and they will be ready
Here we go, here are the extended rom files from a proper UK o2 XDA-2
all i have done is the T-mobile 1.6 upgrade, then made the extended rom vissible and deleted the files, then replaced with this set in the zip file, then hard reset, and all is fine
John
Cool stuff you are the man
thanks for your help
Paul there is one problem, let me try and explaine.
when i first instaled the T-Mobile Dutch rom, as per instruction on here i removed the radio part and installed the rom without radio (hopeing to keep the original uk o2 stuf) but the upgrade worked fine apart from the phone aerial indicator would not show any service just a "!" nest to it, but altho you could not make calls you could still make a GPRS connection, and after you ended that the signal would show and the you make calls as normal
but ater a soft rest you needed to do the connect gprs first to get it work for voice calls, so as this was poxy i just re did the full t-mobile complete rom upgrade after this the phone worked just as it should, but of corse i lost the UK o2 bits and connection details i needed
so maybe as we now have newer roms we may need some of the t-mobile radio parts and our UK o2 parts as well,
i will mess around with it and let you know
is there anyone else with any ideas
John
yes i now have the same problem
not able to make or receive calls
i have found a way round it, iam going to do it again and this time note what i have done, i will post instructions as soon as i finished
john
applecom said:
i have found a way round it, iam going to do it again and this time note what i have done, i will post instructions as soon as i finished
john
Click to expand...
Click to collapse
Ok will hang on before i kill my phone
ok here we go
first of all i cleared out all the files in the extended rom and left it empty
then i hard rest
and entered the regional stuff and got a basic xda running
then i put the files from the extended rom on a SD card
and from the file manager i ran the following cabs ONLY....
and in this order
CallerID_wwe.sa
Camera_wwe.sa
clearview_wwe.sa
Midi.sa
MMS_WWE.sa
msmsgs8
o2_AP_UK.sa
Version.sa
xmailinstaller2003bla bla bla
o2_activeUI (make sure its not the o2_activeUI_eng setup)
after this enter your preferance, it resets and your are done
I do know you can sdeit the config in the extended rom to run just the cabs you need but i will do that later.
at least this way UK people who have lost the perment GPRS after upgrading and the UK setting can have them all back
please let me know if this also works 100% fine for other people as well
(Oh by the way its the cab "OEM_WWE.sa" that makes the phone show no service) so what ever you do dont click this cab
John
Hi John
That was fine well done that man
My XDAII is now in full working order with 1.6 rom and my UK O2 setting and programs
Well Done
In the MMS software on the XDA II O2 UK can someone describe what the setting under Options are please?
I deleted by mistake the O2 server or whatever it is called and its setting up.
Can someone help and tell me what settings they have?
Thank you.
K
applecom said:
Here we go, here are the extended rom files from a proper UK o2 XDA-2
all i have done is the T-mobile 1.6 upgrade, then made the extended rom vissible and deleted the files, then replaced with this set in the zip file, then hard reset, and all is fine
John
Click to expand...
Click to collapse
Hi there !
I have upgraded to 1.60 but my extended ROM, whilst visible, can't be altered as it appears to be locked.......how did you get around that ??
regards
Hi
I just run this tool and it made it visable and not locked
let me know if it works for you, you need to soft reaset after running the cab
John
Just downloaded the new ROM update for Qtek2020/XDA-II from O2..
I doesnt work, it says "error 120, country id error" and that the ROM image doesnt work with my Pocket PC
And in the PDF file it says that the upgrade only works for O2 UK customers... what about me? I bought my Qtek here in Copenhagen denmark? How can I get this upgrade?
The distributer of Qtek here in DK is as good as invicibel, so is the information/support...
Can anyone help?
Regards
Peter
At this URL:
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
you download the two ROM files (XDA II upgrade and XDA II launch ROM)
First, install the Launch ROM and your Qtek is flashing with the original O2 ROM. Then launch the XDA II upgrade and it's OK.
I done this opération with my Qtek (previously ROM 1.60WWE) and it works perfectly!
Hey!
Thank you very much for you reply!
i downloaded the Flash ROM, but the program seems to Quit after the little grey menu has been there saying that its checking my device?
Anyway nothing really happens after that... know what that could be?
Regards
It's strange, what is your ROM version?
Have you ever try a flash operation before?
No I havent.
My ROM version is 1.60.00WWE
and extRom version is 1.60.21
Damm!!
Now I got the ROM update intaller started... but unfortunatly it stopped after deleting my old ROM and showed an error message...And now the Qtek is completely dead... it just says "Serial v.1.02" in the dark display...
I tryied this one time before, also trying to update the ROM.... and the only thing to do is send it to the manufacturer and wait at least 2 weeks for them to reinstall everything.
Hm, well, I dont suppose anyone knows a trick to get it running again?
Regards
Peter
Ouch! I'm sorry for you.
Read this forum, but I believe that you can copy the ROM directly by the SD Card, but I do not know any more.
Try to change the title of the topic to ask an assistance.
I hope that all will be arranged
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi guys, it's been a looong while since I've visited here. Trying to sell my Atom Life here in Taiwan but my Atom Life is English OS.
I've tried downloading the CHT OS from seeo2.com but the CID is probably wrong so it won't let me restore to it. Back in the days of my Cingular 8125 (was that it? the dopod 838) I remember running some tools to unlock the CID but I'm not sure what to do now on the Atom life. I did some searching and reading and see some things about extracting eboot file but I really can't find any.
Can anyone point me in the right directions? Just want to restore this to O2's WM6 and sell this to my friend.
Thank you!
Vic
viclee888 said:
Hi guys, it's been a looong while since I've visited here. Trying to sell my Atom Life here in Taiwan but my Atom Life is English OS.
I've tried downloading the CHT OS from seeo2.com but the CID is probably wrong so it won't let me restore to it. Back in the days of my Cingular 8125 (was that it? the dopod 838) I remember running some tools to unlock the CID but I'm not sure what to do now on the Atom life. I did some searching and reading and see some things about extracting eboot file but I really can't find any.
Can anyone point me in the right directions? Just want to restore this to O2's WM6 and sell this to my friend.
Thank you!
Vic
Click to expand...
Click to collapse
hmm u want to rstore ur Device back to Original WM6 ROM,,,,,,,,den u better read WIKI
I figured out what to do. I ran the firmware update for the language my device currently is, found the pass.32 in the windows\temp directory, copied it out. quit the installer, ran the firmware installer of the language I want, replaced the pass.32 with the one I backed up earlier. And viola!
viclee888 said:
I figured out what to do. I ran the firmware update for the language my device currently is, found the pass.32 in the windows\temp directory, copied it out. quit the installer, ran the firmware installer of the language I want, replaced the pass.32 with the one I backed up earlier. And viola!
Click to expand...
Click to collapse
congrates hav a great time
peace on u\m/