Related
I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
198 views
58 downloads
0 replies!
no thanks guys
Fianlly a reply
I downloaded from the Imate site and have not had any issues yet. Will not have a chance to play with the new load till this weekend.
Dustoff
I also upgraded from club imate site, no issues so far looks good.
Hi, I make the upgrade.
It works fine.
The only problem is extended rom is locked.
Thanks Panja for uploading.
JoseF
the only difference with this version seems to be the removal of the text 'test only not for sale' in the bootsplash screen.
1.72 Upgrade
Thanks Panja for uploading the 1.72 rom. I just upgraded mine and it just took me an hour and nearly same time for adding some software. XDAII working fine. No Problems. Yet.
Cheers 8)
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Panja said:
I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
Click to expand...
Click to collapse
Installed, tested, all OK, looks very good, and better than the 1.66 ITA. witch have had problem with TOMTOM navigator, and with the new 1.72 goes all very very WELL!
Thanks for the upload!
Galactus said:
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Click to expand...
Click to collapse
Hey,
Try to understand this page and you will get it to work:
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Wow
Wow
A bit too much information for me I'm afraid.
I'm running the Imate version now and it's terrible: No gprs & monitor.
I've tried already to switch back to the original version from T-mobile, but I get the same country ID error as when I tried to install the Imate ROM.
To reverse this (as far as I understand) is not easily done I'm afraid!
The settings of the T-mobile ROM (RUU16036WWE_T-Mobile_NL.exe)
look correct if I vieuw the
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:
Re: Wow
Galactus said:
Wow
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:[/quote
Use ER2003edit to erase the phone ID and the county code. then apply your old update and you will be going. This worked for me to downgrade.
Click to expand...
Click to collapse
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
christianj said:
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
Click to expand...
Click to collapse
No problem.
Cheers
Panja
Phone is not ready
Does anyone come across such problem wtih this iMate 1.72.00WWE, that is when activate the phone program, select Tools --> Options..., a dialog comes up with message "The phone is not ready, Wait 15 seconds and try again." However, this never get away, every I select the same, it appears. Please Help.
So far, ive done 2 hardresets on 1.72.
Compared to 1 on 1.66 and 1 on 1.52.
Im really concerned about the stability of 1.72, doing the wrong thing with the wrong program can cause an instant hardreset!
I think I solve the problem now
umm... i cant upgrade.
ive tried about everything, and i always get country ID error.
Ive upgraded to 1.72 before (official), back then i erased the phone ID and
operator code.
So, i tought.. then it should be the same now.. but no, it aint.
I cant upgrade!!
Please help!
Just do it all over again, as you never upgrade the machine. I had do it, it works.
Yeah.. it worked with PH10, Qtek, and WWE.
thanx for the input!
Today i just check on ho website and finally the first ROM update is here, i been waiting for so long to update my rw6828. Now i can update it and hope all the problem we all have will be fixed. So Cheers for rw6828
Of course I have to be a sucker and ask: Can that be burned onto an Atom?
may I add to the above or at least share the ext.rom cabs
The HP ROM only can be use for HP RW6828, i know it was same thing with atom but seem like HP have make something on it device to make use it cant be flash by other rom. try go to hp website but i think u only will find the model with asia hp website.
I will like to share the rom here but i'm a new member here dont know how to do that. hopefully someone will put on here. Register on hp website and it will allow u to download. Cheers
****~~~This update can't change my RW6828 form CHT 2 WWE,I think its still need an unlock CID tools
U can Download the CHT ROM & WWE ROM but u can't flash from cht to wwe or even from wwe to cht coz i try it before. yes like u say u have to unlock it but so far i cant find away to do that. Hmmm still waiting some pro can done it. Cheers
nicholas99 said:
U can Download the CHT ROM & WWE ROM but u can't flash from cht to wwe or even from wwe to cht coz i try it before. yes like u say u have to unlock it but so far i cant find away to do that. Hmmm still waiting some pro can done it. Cheers
Click to expand...
Click to collapse
Why not try copying the files from the WWE rom in Windows/Temp after extraction then paste those files into same directory when the CHT rom has extracted then continuing the flash procedure, just a thought and dont blame me if things go pear shaped.
homer285 said:
Why not try copying the files from the WWE rom in Windows/Temp after extraction then paste those files into same directory when the CHT rom has extracted then continuing the flash procedure, just a thought and dont blame me if things go pear shaped.
Click to expand...
Click to collapse
I've try this solution 4 many times.But, the RUU doesn't allow to do this.
I try the CHT one(sp34075.exe), the hpRUU.exe pop up a fatal error message during the upgrade process and cause my 6828 dead thoroughly: no response to powerup & hard reset.
what a shock!!! Hardly imagine that HP even make this ****!!!!!!!!!!!!
hey can someone post the link for the hp rom update? I cant find it. Do I need to register on the HP site first?????
rohseq
http://h20000.www2.hp.com/bizsuppor...sId=1839223&swLang=8&taskId=135&swEnvOID=2067
fra996 said:
http://h20000.www2.hp.com/bizsuppor...sId=1839223&swLang=8&taskId=135&swEnvOID=2067
Click to expand...
Click to collapse
Thanks alot bro....
HP 6280
Can we run ROM for Atom Prophet_220734_2207114_024721(AKU2.3)
into Hp 6828
Thanks
no we Can't we run ROM for Atom Prophet_220734_2207114_024721(AKU2.3)
into Hp 6828
What about ELL ROM,i have it installed on 6815 but i want to install WWE ROM,unfortunately the official upgrade from HP says that the version is incompatible and stops,any suggestions?
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
I recieved an o2 atom life, wm5. Which is unstable.
I want to use this: http://www.mwg.com/atom-life_wm6_pre.aspx
(MWG's WM6.1 upgrade - June 2008).
But it shows "Vendor ID error"... So I guess I need soft SPL...
I searched a while but found only things for Atom/atom Pure... but nothing for atom life...
If I searched using "life" I got many "not for atom life" posts.
Any one that can guide/help me?
regards.
download a O2 atom life official ROM
run it, and b4 u really flash ur device, backup "pass.32" (c:/windows/temp)
then run MWG atom life official ROM
replace the pass.32 right b4 the soft detect ur device
be honest....there are not much atom life resource on internet then HTC device, especially here. do more searching and u will know.
Actually, MWg has not yet released any WM6.1 ROM for Atom Life... And MWg might has no plan on it.
aa125690 said:
Actually, MWg has not yet released any WM6.1 ROM for Atom Life... And MWg might has no plan on it.
Click to expand...
Click to collapse
i doubt they will ever release 6.1, it's a way to force you buying a new pda.
um.... i think there is no hope for radio stuff and driver
yet we stil have OS part as there custom build 6.1 ROM
If the above problem still not resolve. My suggestion is contact them via email [email protected]. I believe there will able to help you.
Refer to http://www.mwg.com/helpdesk.aspx for detail.
Thanks for the help.
I'll try this weekend!
PS. Yes I was mistaken, it's not 6.1 it's just wm6 with office 6.1 my bad... but it's updated to this month.
Hello.
I was not able to upgrade.
I did not find the
O2 atom life official ROM
Click to expand...
Click to collapse
Any one knows where can I find it?
PS I found the atom pure original rom, if some one want its...
medellinrob said:
Hello.
I was not able to upgrade.
I did not find the Any one knows where can I find it?
PS I found the atom pure original rom, if some one want its...
Click to expand...
Click to collapse
Check it out.
http://forum.xda-developers.com/archive/index.php/t-332967.html
I dont know whether you can fliash direct, otherwise there was a conversation on how to (use search).
medellinrob said:
Hello.
I was not able to upgrade.
I did not find the Any one knows where can I find it?
PS I found the atom pure original rom, if some one want its...
Click to expand...
Click to collapse
Not only the O2 official Rom but you have to find the original rom for your atom life (which is suitable for your device's default language) . And actually, you just need the file "pass.32" , this file is used for cheking your device's default language.
I'll give you may pass.32 to see if it works or not( mine is WWE). All you have to do is download MWG rom, run it, then replace this pass.32 to C:\Windows\ temp , after that connect your device to pc and flashing
To all using Atom liffe, please share your pass.32 please !!
Thanks a lot. Finally!
medkid said:
Not only the O2 official Rom but you have to find the original rom for your atom life (which is suitable for your device's default language) . And actually, you just need the file "pass.32" , this file is used for cheking your device's default language.
I'll give you may pass.32 to see if it works or not( mine is WWE). All you have to do is download MWG rom, run it, then replace this pass.32 to C:\Windows\ temp , after that connect your device to pc and flashing
To all using Atom liffe, please share your pass.32 please !!
Click to expand...
Click to collapse
You are the greatest!!!
It worked!!!
Thanks!!
Hey Medkid thanx for helping other members. Bro I would love to help others if I can by providing my pass.32 file but let me know where to get that from my device or pc. Would glad to share it at the soonest.
sakshamkatyal said:
Hey Medkid thanx for helping other members. Bro I would love to help others if I can by providing my pass.32 file but let me know where to get that from my device or pc. Would glad to share it at the soonest.
Click to expand...
Click to collapse
Its already shared in another Medkid ROM's forum. Just search for Pass.32 and you would find.
Hi all,
I got a Nike form a friend. It has a original Dutch HTC rom on it, i think.
I want to upgrade it a little. I've looked through the forum but can't get figured out wat to do.
I want to backup the original ROM
I want to upgrade the radio
I need to hardspl
I want a WM 6.5 based Dutch ROM
Can someone point me to the right locations where i can find the appropriate files and instructions.
Many thanks,
Hans
pinobird said:
Hi all,
I got a Nike form a friend. It has a original Dutch HTC rom on it, i think.
I want to upgrade it a little. I've looked through the forum but can't get figured out wat to do.
I want to backup the original ROM
I want to upgrade the radio
I need to hardspl
I want a WM 6.5 based Dutch ROM
Can someone point me to the right locations where i can find the appropriate files and instructions.
Many thanks,
Hans
Click to expand...
Click to collapse
Hoi Hans, I'm gonna try to help you, but it's important for me to make sure which device you have, because there are a lot look a like's but it's just another phone, to make sure which device you own just take a look under your battery and tell me if you have a nike100 or another version.
The second thing I need to know, does your phone have a simlock.
Greetz,
It's a NIKI100 and is not simlocked
pinobird said:
Hi all,
I got a Nike form a friend. It has a original Dutch HTC rom on it, i think.
I want to upgrade it a little. I've looked through the forum but can't get figured out wat to do.
I want to backup the original ROM
I want to upgrade the radio
I need to hardspl
I want a WM 6.5 based Dutch ROM
Can someone point me to the right locations where i can find the appropriate files and instructions.
Many thanks,
Hans
Click to expand...
Click to collapse
you can start from here http://www.shipped-roms.com/index.php?category=windows mobile&model=Nike
pinobird said:
Hi all,
I got a Nike form a friend. It has a original Dutch HTC rom on it, i think.
I want to upgrade it a little. I've looked through the forum but can't get figured out wat to do.
I want to backup the original ROM
I want to upgrade the radio
I need to hardspl
I want a WM 6.5 based Dutch ROM
Can someone point me to the right locations where i can find the appropriate files and instructions.
Many thanks,
Hans
Click to expand...
Click to collapse
Hola hans, any news on your plans? I just "revived" my old nike today after beeing in a drawer for years, and I must say, it´s been a full success and it only took me less than an hour to do so. Now I even have WinMo 6.5.x and "sense-like" tabs