Related
I had a problem with the power button not working and I was adviced to reflash the original ROM (I never did a ROM upgrade) so I picked the original and latest Cingular ROM. Flashing strated and then hung for a while @ 80% progress, few minutes after continued up to 95% progress and at that point I got ERROR 326 message (INVALID COMMAND) stating that the NBF file couldn´t be used for this phone. I dissconnected the phone and did a soft reset and what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4, this time it went all the way to 100% progress and the congratulations screen, I made a soft reset (the only way I know to exit the bootload mode) and I got momentarly the HTC innovation screen and right away dissapeared to enter in bootload screen again.
Then I reflash ROM with RUU_Qtek_9100_AKU2_21878_024711_ESN_G4, this time it went all the way up to 100% and success screen appeared, the phone rebooted and is up and running although with inoperant power button.
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
luiggi said:
what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4,
Click to expand...
Click to collapse
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
There's no secret to flash while in bootloader screen. Use the RUU file. It might take a little while longer to detect the phone but goes all the way to the end
Yes, it has to be a hardware issue
mestrini said:
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
Click to expand...
Click to collapse
I´ll try the disassembly and perhaps is not a big deal to fix it, I got a copy of the service manual posted in some of the forums, and I´ll give it a try.
Thanks for the advice!
You just do it!
vlada said:
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
Click to expand...
Click to collapse
Try first a soft reset while in the BL screen, if doesn´t react then do what I did:
I just plugged the USB cable and run the RUU!! As simple as that and as risky as the ROM you select not being the right one.
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
NeXuSqtek said:
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
Click to expand...
Click to collapse
battery out, connect to wall charger and turn charger on, insert battery, dont touch it for a good half hour. dont worry if charging light doesnt come on straight away.
It sounds like the battery is possibly over discharged. doing as i listed 'should' let the phone start charging without trying to turn itself on.
ktod_16 said:
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
Click to expand...
Click to collapse
yes send it back, silly to try and fix an error with a brand new phone. (Also, hijacking threads is considered bad manners. )
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
it's highly unlikely, but as with anything of this nature nothing is foolproof
elgeor said:
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
Click to expand...
Click to collapse
bad news for you i'm afraid. i'm not aware of any successful fixing of radio update error.
Ok,thanks, I hope that the battery is the source of this problem,not the device .
I went today at a local service,they've told me that the battery is 100% charged. Unfortunately the problem is with my HD2. I left it in service and I will pick it up tomorrow repaired I hope. Thank you for helping me.
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Nice thread
netvpn7 said:
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Click to expand...
Click to collapse
I knew I made a mistake, my question now is can it be fixed ?
Hi, I tried to instal Android 2.3 Gingerbread on my htc hd2 but when I installed MAGLDR it stopped working. I realized I had installed the wrong HSPL, but now it won't start or respond to a USB connection. I can't turn it on or off and it only shows a white image with HTC on it....Does someone know how to help?
Greetzz
pull battery, restart into bootloader, apply 2.08.hspl,restart.
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Mark-- said:
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
Click to expand...
Click to collapse
Finally I was able to load my HD2 into MAGLDR so problem solved..
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
I have the same problem.
Have you found a solution?
zongamin said:
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
Click to expand...
Click to collapse
Hey!
Dose you RESET FACTORY SETTINGS and FORMAT CACHE in recovery, before flashing with ODIN?
CHEERS!
Did the light lit when you entered the download mode? That's the indicator.
I got the same proble, tried several firmwares with odin but, when the phone reboots it starts flashing again
Hey!
You all, try THIS one.
CHEERS!
casiocas said:
Hey!
You all, try THIS one.
CHEERS!
Click to expand...
Click to collapse
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
moe_szislack said:
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
Click to expand...
Click to collapse
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
casiocas said:
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
Click to expand...
Click to collapse
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
moe_szislack said:
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
Click to expand...
Click to collapse
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
casiocas said:
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
Click to expand...
Click to collapse
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
moe_szislack said:
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
Click to expand...
Click to collapse
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
casiocas said:
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
Click to expand...
Click to collapse
Ok, Thank you
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
misterio_mr111 said:
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The same thing happens to me, Anybody has any idea?
Just send it to the service center.
No other recovery method is know.
I have been in every forum arond for this kinda brick and there is no solution for YOU to do. Also there is absolutely no way for Samsung to see either say that after the first boot the battery went dead and it never started again. It will be covered by your warranty and brand new ace! Now dont go making stupid mistakes again hope i helped
Sent from my GT-S5830 using XDA App
Apk/sim bricked my phone.
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
BLZBud said:
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
Click to expand...
Click to collapse
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
moe_szislack said:
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
Click to expand...
Click to collapse
Even Samsung don't have an easy way to repair it, hence they replace the mainboard to fix the issue.
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
russ18uk said:
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
Click to expand...
Click to collapse
Hey!
Look HERE. Hope its helping!
CHEERS!
Yep, I just done that. Now the phone will not power on at all. It will show as a device in Odin and Device Manager but no power comes up. It will not even go into recovery either.
russ18uk said:
Yep, I just done that. Now the phone will not power on at all. It will show as a device in Odin and Device Manager but no power comes up. It will not even go into recovery either.
Click to expand...
Click to collapse
Hey!
Firstly: For me worked(not in unlock, but in some other cases, where other soft fails) the STOCK ..XXKC1. Try to flash it. Dose you put you phone in to "Download" mode for Odin?
Where you get that UNLOCK? From here?
These are the questions, what I want answers. Maybe after that I can say surely.
TIA!
CHEERS!
I was following the guide [TUTORIAL]How to Network Unlock Samsung Galaxy Ace Via ADB. Phone didn't ask for unlock code when I put a Vodafone sim in my o2-locked Ace. Shortly after putting the Vodafone sim in it said something like Android.phone force closed.
I can flash any firmware but so far the phone will not boot. The screen will just flash after flashing firmware and I can put it in Downloading recovery but nothing else happens so far.
Could it be something to do with the phone storage being screwed up? I followed the tutorial word for word and got my code and everything.
russ18uk said:
I was following the guide [TUTORIAL]How to Network Unlock Samsung Galaxy Ace Via ADB. Phone didn't ask for unlock code when I put a Vodafone sim in my o2-locked Ace. Shortly after putting the Vodafone sim in it said something like Android.phone force closed.
I can flash any firmware but so far the phone will not boot. The screen will just flash after flashing firmware and I can put it in Downloading recovery but nothing else happens so far.
Could it be something to do with the phone storage being screwed up? I followed the tutorial word for word and got my code and everything.
Click to expand...
Click to collapse
Hey!
Sorry, then. I cant answer. Dont know that. Maybe better to ask in that thread, from where you followed the TUTORIAL, how to unlock.
Go back to that thread and ask in there.
CHEERS!
I,m The owner of the Unlocking post and i feel like i need to help, Last night i was "Playing" ClockWork Recovery and i touched the "Fix Permissions" option, the phone got stucked and i waited like 10 minutes and nothing happend so i long pressed the power button for a hard reset and when the phone turned on it made the same thing that your did, it sended me a message like yours and the phone started acting weird, and throw me a lot of other error messages so i rebooted the phone and the same, so i entered the recovery again and made a wipe/data and calvik cache, turned the phone back on and problem solved, if it does not work try this: http://forum.xda-developers.com/showthread.php?t=1071970 and you can install a custom rom wich is better than stock, i suggest FirstUA-ROM, i hope this was helpfull and im sorry that this happens to your phone.
russ18uk said:
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
Click to expand...
Click to collapse
Also to enter the recovery is, Home + Power on button
Jc_master said:
I,m The owner of the Unlocking post and i feel like i need to help, Last night i was "Playing" ClockWork Recovery and i touched the "Fix Permissions" option, the phone got stucked and i waited like 10 minutes and nothing happend so i long pressed the power button for a hard reset and when the phone turned on it made the same thing that your did, it sended me a message like yours and the phone started acting weird, and throw me a lot of other error messages so i rebooted the phone and the same, so i entered the recovery again and made a wipe/data and calvik cache, turned the phone back on and problem solved, if it does not work try this: http://forum.xda-developers.com/showthread.php?t=1071970 and you can install a custom rom wich is better than stock, i suggest FirstUA-ROM, i hope this was helpfull and im sorry that this happens to your phone.
Click to expand...
Click to collapse
Hey!
Thx for dropping in and clearing things.
CHEERS!
Jc_master said:
Also to enter the recovery is, Home + Power on button
Click to expand...
Click to collapse
Hi mate. Thanks for dropping in. I cannot enter recovery; the phone just does what happens in the OP - it just flashes. I can only enter 3-button recovery. So far I've tried 5 different firmware 2 Froyo (inc stock) and 3 different Gingerbreads found droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html. Will try a custom firmware but otherwise will try and take the phone back to o2 tomorrow.
russ18uk said:
Hi mate. Thanks for dropping in. I cannot enter recovery; the phone just does what happens in the OP - it just flashes. I can only enter 3-button recovery. So far I've tried 5 different firmware 2 Froyo (inc stock) and 3 different Gingerbreads found droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html. Will try a custom firmware but otherwise will try and take the phone back to o2 tomorrow.
Click to expand...
Click to collapse
Hey!
Dont take it back to SERVICE, before you not get flashed back to STOCK firmware or they can MAYBE, see that you not in stock firmware. Just saying it, that you DONT get in to trouble, with warranty.
CHEERS!
Yeah too it into o2 this morning. Luckily the dipshits that work there don't know anything. He just plugged it into his laptop and ran Kies. It's being sent off though. Hopefully will be sorted in warranty for free
Hello,
To solve this problem, did you activate the warranty?
I have the same problem, none of the existing ROM work, or find another solution?
I appreciate the help,
mscofield07
Yeah; I sent it back for warranty. They replaced the main PCB.
Can we unlock locked SGA? ?
XDA Rocks!
Please guys tell me,what should i do....i installed a Miri ROM long time ago and he starts to crash to freeze ...i decided to return to stock and when i installed the 1.66 WWE rom it works for 2 days and yesterday my phone refuse to start,remains in the white screen.
I tried with the hard reset but still remains at the white screen,i tried to install a new ROM but every time says that the files are corupt...
I also tried with the FAT32 method but after 25% stops and gives me a fail...
Please,what should i do???
Budan Andrei said:
Please guys tell me,what should i do....i installed a Miri ROM long time ago and he starts to crash to freeze ...i decided to return to stock and when i installed the 1.66 WWE rom it works for 2 days and yesterday my phone refuse to start,remains in the white screen.
I tried with the hard reset but still remains at the white screen,i tried to install a new ROM but every time says that the files are corupt...
I also tried with the FAT32 method but after 25% stops and gives me a fail...
Please,what should i do???
Click to expand...
Click to collapse
Will the phone reboot into the bootloader screen?
Also PLEASE in future post questions in the correct forum. Thanks.
Mark.
If i restart the phone,the same will happen.Stucks on the white screen.......
Budan Andrei said:
If i restart the phone,the same will happen.Stucks on the white screen.......
Click to expand...
Click to collapse
You enter the Bootloader screen by holding down the 'volume down' button while rebooting or powering up the phone.
Mark.
Yes,the phone enters in the bootloader mode.
Budan Andrei said:
Yes,the phone enters in the bootloader mode.
Click to expand...
Click to collapse
What version of SPL does the bootloader screen give you?
Mark.
Spl-2.08.hspl
Budan Andrei said:
Spl-2.08.hspl
Click to expand...
Click to collapse
Usually if the phone gets stuck in the white screen then it means the Radio is incompatable with the installed Rom so you have 3 options that I can think of.
Download the latest Radio (2.15.50.14 as far as I know) and flash it via the bootloader screen in activesync mode.
The second option you have is to download a different rom than the one you chose last time and install it via the same bootloader activesync method.
Lastly could also download the latest stock rom from your provider and flash it via the sd card method which should reset all parts to stock version.
Mark.