HELL: MODEL ID ERROR - MDA II, XDA II, 2060 ROM Development

Dear all,
my xdaii from1.52.00CHT 10/23/03 1.08.00 1337.18 1.52.118)
used "Xda_II_Upgrade_v16050.exe" update to Eng. ver. but it death at:
Stage1:Earaing Rom image. please wait.... my xda2 now show "USB v1.06" only. I tried meny version to re-upgrade, but it show "ERROR 100: MODEL ID ERROR 1-N-PH-PH-PH"; and I create a sd card image from my other working xda2(1.52.00CHT, bootloader v1.03) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", wait a few time it show "SD Download Section=1 No allow update!".
Can any body to help me ?
thanks a lot !
kaceda

Upgrade
Try with 1.72 ROM
It seam to be the only one that you can put on your device when you have PH-PH-PH error.
Hope these healp you.
Regards.

MODEL ID ERROR
Dear Gibbo,
:lol: Thanks for your reply, but I tried run "ruu172104wwe_t_mobile-uk.exe" it show "ERROR 120: COUNTRY ID ERROR 1-1-3-3-3" and run "ruu172126wwe_imate.exe" then it show "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
Thanks & Regards,
kaceda

http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=

kaceda have you fixed your devaice with above link?
I haven't.
Keep trying with the 1.72 ROM and change and/or delate Country code, Langage and ID Model.
Good look! and Ciao.

How To update ExtRom ?
I create a sd card image from my other working xda2(1.66.00wwe,1.08.00,1.66.165, bootloader v1.06) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", press power buttom,wait a few minutes, it show "Checksum OK". Gread !!! I did a hard reset, It work !! But some application show disorderly code, i check it all version, it show (1.66.00wwe,1.08.00,1.66.174,bootloader v1.06), So I think this way update CE rom only n ExtRom(Chinese ver.) did not change.
Any body can help me how to update the Extention Rom only?
Meny thx Gibbo n cairo31male n all !
Regards,
kaceda

To update the extended ROM the EASY way:
1. Just copy all the contents of your working XDA's Extended ROM to your PC via ActiveSync or to an SD card,
2. Delete all the files in the Extended ROM of the device you which to upgrade,
3. Put the files you copied in step 1 in the empty Extended ROM.
4. Hard Reset.
That's it. You will have the desired Extended ROM, and you will notice that the version will have changed.
In case you do not know how to access Extended ROM through ActiveSync or File Explorer, have a look at the following post and download the ExtendedROMUnlocker.arm.CAB:
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=

update the extended ROM
Thanks cairo,
But I wish reflash wwe version ExtRom to xda2, hard rest xda2 the ExtRom not change. I tried usd HimaUpgradeUt to flash ms_.nbf into xda2, but many many times all failed, do you know how to used SD card method to dump ExtRom from xda2 and reflash it to xda2? CE rom have been worked ! how about ExtRom ?
Regards,
kaceda

Related

BIG PROBLEM >>HELP.. ROM UPGRADE..BLANK SCREEN

i have a O2 XDA II . it came loaded with 1.66WWE. i wanted to put 1.60. i downloaded it from sourceo2.com
then double clicked the installable. it started the downgrade . it said it will take 30mins & started deleted the rom image.. i then went for lunch & came back in 15mins.. the phones now totally dead.
If i dock it , the screen says USB V1.06
if i remove it the screen says Serial V1.06. I cant hard rest it nor can i soft reset it. i huess cause there no rom image in it.
What do i do.. please help with as many links software as one can..
Please...
ive got 1.72, but when i try that. it says country error.??
can that be resolved.. i dont mind loading 1.72.
the good news is that it seems you still have the boot loader working ... use ER2003 tool to modify the country code of the 1.72 ROM file ... or you can use the xda2nbftool.exe if you like the command line mode
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
hyper said:
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
Click to expand...
Click to collapse
Unpack the .exe file with winrar/winzip. And you're good to go.
Edit this file: ms_.nbf
managed to unpack it... now when i try to load 1.60 it says model id error & if i try to load 1.72 it says country id error.
what do i change in the ms_.nbf file ????
do i only change this file fields or all three??
i even removed the battery & checked the model ID. on my phone it says PH10B
i changed all the three files to PH10B ..
Now i get Connection Error.....
Now what???
now the error is ERROR 101... connection error.
(i'm loading 1.60)
also is it possible for me to do it via my emory card (i have a MMC32MB & 128MB)
if so, what file do i need to copy & then whats the procedure??
i got 1.03.00 rom on mine. my xda 2 is 2 days old now dunno wht rom to load it up with now. whts the best & safe rom now. i have no apps or nething to back up so its oki. the phone was bought from u.k. and was locked on O2 network. now its unlocked and being used in India. plz advise wht ROM to d/n and use. if possible the d/n link as well. thx
Question?
Why do you want to downgrade your phone? :shock:
For upgrade to 1.72:
1. Download i-mate 1.72 update and xda2nbftool
2. unpack that update to any directory on your harddrive
3. download script from this post to created directory (unpack it too)
4. copy xda2nbftool.exe to that directory
5. run provided script
6. insert XDA2 to cradle and then HimaUpgradeUt.exe
You will i-mate splash screen from i-mate though, but working device.
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
i wonder... most O2 XDA II come with 1.6 rom version. mine came with 1.66. could that mean its not O2 even though its written O2 on my phone? could it mean its T-Mobile or something??
can someone post a link or software that i need to put onto my MMC card & then use that to install the rom from the card inserted in the phone??
hyper said:
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
Click to expand...
Click to collapse
So, what's that problem? Can you run it?
Try to run it in command prompt... And if it writes any error, post it here...
Can you access the file system of your XDA2 from ActiveSync -> Explore?
now i managed to get the problem of Country error out of the way , but now im getting the ERROR 101 - Connection Error.
no i cannot browse any files & my active sync does not show connected.
what files do i need to copy paste onto my MMC card so that i can flash it by executing the files with the camera button & the MMC Card inserted??
im dowloading the NTRW & 1.72 NK.nb1 file. do i just copy & paste it on the mmc card & then instert the card into the phone & then press the camera button.. should this do the trick??
this is all that i have tried so far... yet no luck.
my phones originally from malaysia , its an O2 XDA II
i have the following rom with me. my bootloader is V1.06
1. RUU172800WWE_CDL_SKU1
2. XDA_IIupgrade_v16050
3. RUU172104wwe-t-mobile-uk
1. i removed the battery , dcoked the phone, connected the charger to the docking bay at the back...the red light on the phone lights up.... the bootloader screen shows up ina slightly distorted manner.
i then ran all the three roms as it is..without editing anthing. The error i get in all the three times is ERROR 101. CONNECTION ERROR. it tells me to check is usb is connected, charger is connected usb port is conencted & the phone is on. .......... everythings connected but obviously phone can only be in bootloader mode.
2. i put the battery back in dock the phone, the charger is yet connected to the back of the docking bay. .. i try all three installations withour extracting or editing as they are exe files..... now, all the three times i get COUNTRY ID ERROR OR MODEL ID ERROR.
3. when i edit the ones that give me model id error then i get CONNECTION ERROR AGAIN. (this is again with the battery in & charger plugged in)
i downloaded the NTRW & 1.72 NK.nb1 file. but the one that is available on this forum is corrupted. so i cannot extract it.
NTRW ive downloaded seperately. i need the nb1 file now. can someone post a working, no-corrupted image rom image file?
once i get the correct Rom.nb1 file... all i have to do it copy & paste the correct rom.nb1 & ntrw.exe file onto my MMC card & keep the battery in the phone & insert the MMC card & press the Camera button .... is that correct? i'm guessing that this will run the ntrw exe file & load (dump) the Rom.nb1 file onto the phone. is that correct?
please do let me know what else i can try & dowload a newer RUU or something. i think the best way is to SD flash the phone.
i dont even mind flashing it to a PPC2002 version & then upgrading it from there. if thats possible.
As far as the connection between the USB Docking Bay is concerned,...everytim i connect or disconnect the phone, i hear the familiar XP "TING" which shows that some USB thing is connected, but my active sync does not show that the phones connected, i guess that cause it got no rom in it.
Also when i edit the ms_ / NK / Rom files er2003 i get an error everytime i start the software, but i just press IGNORE & continue. i always get ROM successfully written & then the error pops up again but i keep pressing ignore. this works... but whats up with the CONNECTION ERROR. IF ITS NOT CONNECTING TO THE PHONE, HOW DOES IT KNOW THAT THE MODEL ID OR COUNTRY ID WRONG ???
Ok.
If any ROM update can detect your device (as we can see error messages COUNTRY ID ERROR or MODEL ID ERROR), there is hope, you can update your device.
If it's 1.72 ROM (that writes COUNTRY ID ERROR or MODEL ID ERROR), use the solution I send you few posts ago (unpacking, running batch script etc.)
When you updating, keep battery in your device and charger of device connected to cradle! Don't remove anything.
BTW: Don't use RUU172800WWE_CDL_SKU1 update, it just update only part of your device (ExtROM)!
BTW2: Read this: http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
thanks againa beecher. the problem is that once i use the patch & then run it. it does not show me the country id or model id error (for which i thank you) but then it says error connecting.
i have a USB to serial connector. should i try serial connection?? or maybe try it on another computer.
can anyone please tell me how do to a SD flash step by step with the Rom.nb1 file attachment of link.

UPGRADE MDA 2/XDA 2 BY SD CARD AND MY OWN ROM

Please explain me how can I do upgrade windows ce in my MDA 2.
Step by step. Need I special program to format sd card ? What is country ID problem in this case. When I try upgrade directly ( USB ) then see :
error geting device data. File getdevdata.exe - kill my system and MDA display only bootloader screen ( serial/usb , v1.03 ). Thanks for advice....
the rom KITCHENs are ONLY!!!! for xda1 never xda2
Whats a pity ! Unluckily certain You have right. So, how can I prepare my own ROM. Means best like rom kitchen but not necessarily. I know about Extennded ROM Editor (by the way:the password (e.g. HTC) will be wrong:.......). Thanks for reply

Last Caller ID

Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think

ALPINE (Qtek 2020i) flash "Country ID Error"

Hello,
please, please I need help
for flash Alpine´s ROM. I tryied 4 different ROMs for flash my device and always detects "Error 120: Country ID Error".
Flashing by way of xda2nbftools with XOR codes of Alpines ROMs not worked - control checksum errors.
Regards
You should use an executable that does not check country ID. MaUpgradeUt_noID.exe is the file you are looking for. Run your ROM upgrade program. At the point when you face the country ID error under a directory (sth like this: C:\Documents and Settings\Your Name\Local Settings\Temp\A funny named directory) you will find 6 files. Before cancelling the upgrade copy them to another safe directory (after cancelling all will be deleted automatically) and cancel the upgrade. Replace HimUpgrade.exe with the file I attached in that safe directory. Put the alpine in bootloader mode and cradle it. Then run this file (MaUpgradeUt_noID.exe). First it will fail then in the second time it should work.
Thank you very well,
your method is correct.
Now i have:
Radio: 1.03.00
Ext.ROM: 1.11.144 WWE
ROM: 1.11.00 WWE
Protokol: 1337.42
HRomek, is this firmware from I-mate PDA?
voln, no it is firmware from i-mate PDA2 (ALPINE).
that really works. thanks a lot

XDA Comet flashing via USB

As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
2. Executed the DSUU for Atom Life (WWE 20070914) and cut the 12 header bytes from both "FLASH.dio" and "ExRom.img" and pasted those 12 bytes in the German Comet AL1.dio and ExRom.img, and renamed AL1.dio to FLASH.dio
3. Placed the patched German files in the DSUU temp directory, replacing the original WWE files (c:\windows\temp)
4. Instructed DSUU to proceed as normal
5. The deviced cold-booted after finishing and worked.
So, flashing vía USB can be achieved by means of re-using the 12 bytes of both headers (it might be needed depending on the original ROM, to either edit Pass.32 or to hold down the "arrow key" of the PC at the initial stages of DSUU to skip the CID check).
Of course, this has not cured my "Radio ROM" problem, as my XDA Comet still has the WWE Atom Life Radio Rom, which does not work on Comet devices.
I will now work in finding a way (shall it exist) to dump the Radio Rom (I have already got itsutils and executed pdocread a couple of times).
Best regards
Hi
Maybe you can dump the radiorom with haret.
Unfortunetly I have not the knowledge to help you in these job.
You flashed the complete update with replaced files ?
Or did you flash OS and ExtROM only ?
I flashed the complete upgrade.
I did so because I had already flashed the complete WWE Atom Life upgrade, so in my case it made no difference, to put all these extra files back into the device, as they were already there!!!
But if we manage to find out which files affect the GSM/Radio part (and we also find out how to dump radio roms), it might be that we end up with a clear process to update Comet/Life with different ROMs using USB.
P.D.
I did my best into getting a 512 Mbytes MiniSD, but MediaMarkt, Saturn and smaller shops did not have anything so small. They were basically focusing on SD or MicroSD. I think MiniSD may end up as a dead technology.
pepelu456 said:
P.D.
I did my best into getting a 512 Mbytes MiniSD, but MediaMarkt, Saturn and smaller shops did not have anything so small. They were basically focusing on SD or MicroSD. I think MiniSD may end up as a dead technology.
Click to expand...
Click to collapse
You can try a bigger card. If it will be recognized, you can flash with this one.
I don't think, that the device will be damaged.
But I haven't test it.
PS:
I played with pdocread and the following command dumps a part, contained the bootloader.
As I said I don't know how to use pdocread to dump a specified part, but maybe this is a small hint, how you can use this tool.
pdocread.exe -n 0 0x00000000 0xFFFFFFFF -b 0x100000 File_out.bin
Click to expand...
Click to collapse
I belive, if you can dump the bootloader, you can also dump the radiorom.
I hope you have success to lokate the Radiorom.
If I can help to dump the radio, PM me.
I'm not sure, but if you choose in BL:
(5) Burn MOT/BL via UART
and insert a MiniSD, it appered the messages "couldn't find parti.mbn , amsshd.mbn and amss.mbn.
amss.mbn must be the RadioROM.
Your pdocread command works in my mixed WWE-GER device too and dumps te bootloader.
Trying to access binary partition 1 delivers the following error:
"Invalid controler"
Trying to access binary partition 2 delivers the following:
-- Once again the same dump of the bootloader.
--------------------
I also think that it should be possible to dump the Radio ROM, as DSUU is able to report the "date" of the Radio ROM file, whereas WM6 is unable to communicate with the Radio Stack.
Of course, the obvious (not necessarily true) reasoning is that WM6 is trying to use standard API calls that are failing whereas DSUU is accesing the ROM files before going into bootloader mode (when the user decides to execute the upgrade)
HARET fails to dump anything over 4Kbytes with a "short write to disk detected" (it will sometimes not write a single byte down)
Both behaviours may be caused by lack of adaptation to this specific hardware platform.
Regards
P.D.
I really find it unbelievable that the Atom Life has had so little hacking, taking into account that it has been sold by O2 Asia for quite a while, but even looking at Chinese forums (no, I can't speak chinese), they don't seem to be any more advanced than we are.
pepelu456 said:
As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
Click to expand...
Click to collapse
Pls help, where you can have that comet ROM and Extended Rom.
Thank you.
Dear pepelu456,
I got your same situation. Now, so sad cannot repair.
pepelu456 said:
As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
2. Executed the DSUU for Atom Life (WWE 20070914) and cut the 12 header bytes from both "FLASH.dio" and "ExRom.img" and pasted those 12 bytes in the German Comet AL1.dio and ExRom.img, and renamed AL1.dio to FLASH.dio
3. Placed the patched German files in the DSUU temp directory, replacing the original WWE files (c:\windows\temp)
4. Instructed DSUU to proceed as normal
5. The deviced cold-booted after finishing and worked.
So, flashing vía USB can be achieved by means of re-using the 12 bytes of both headers (it might be needed depending on the original ROM, to either edit Pass.32 or to hold down the "arrow key" of the PC at the initial stages of DSUU to skip the CID check).
Of course, this has not cured my "Radio ROM" problem, as my XDA Comet still has the WWE Atom Life Radio Rom, which does not work on Comet devices.
I will now work in finding a way (shall it exist) to dump the Radio Rom (I have already got itsutils and executed pdocread a couple of times).
Best regards
Click to expand...
Click to collapse
hi,
u said that we can flash via usb i have atom life purchased from middle east it have wm5 pre-installed , i entered www.seeo2.com and saw that there is an upgrade to wm6 so i downloaded the file an started the update process when detecting device it says ID ERROR, is threr a solution for this problem , and something else i flashed the wm6 rom via SD i took from temp folder in windows and removed the 12 headers , it flashed nice , but i want from the usb so that i can flash the radio files , ext rom , boot loader ...etc.
thnx
Yoou can find sth here for yr upgrade http://forum.xda-developers.com/showthread.php?t=378616
it didnt work for me changed the pass.32 no use i think i cant upgrade via usb
Try this http://www.myxda.com/xda-atom-life_wm6_oct2007ara.aspx
hi i need hel.. plese
i have a o2 comet and mi radio is gone after rom update mwg... plese scorpio could u help me with the original o2 comet files to restore gsm module, i'll be forever in your dept... i sherched everywhere even on ur blog, rapidshare, google, tryed everi original atom life rom, bu evrithig works with other rosms exept radio gsm, plese help me with the files ... i try upgrading rom becouse batery life was lousy. plese help...
the same problem
ion_plugged said:
i have a o2 comet and mi radio is gone after rom update mwg...
Click to expand...
Click to collapse
I have exactly the same problem. Even already try to receive update from service centre... answer was: "we need you device to test and... for repair app cost 100eur and more"
If some one can help us... please help!!!
count me in this list i have the same issue lost radio and imei and i don't have O2 in my country

Categories

Resources