I've downloaded the latest rom version from 02 but although I have no trouble connecting to sync. it won't connect for the upgrade error 101 is reported and I have to start again. What am I doing wrong?
if it's the country id error then you have to flash following this guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
or search this forum i'm sure that somebody had that issue before you
Related
im runng wm2003 - rom version 4.00.11, and radio 4.16.00
i want to use xda as modem for my laptop, but i dont seem to have the wmodem application and i dont want to have to go through the whole rom change process again.
can i download just the wmodem application from somewhere or is there another downloadable program ?
thanks,
David
[email protected]
Actually we aleardy tried it and its doesnt work, it wont connect and if connected the only way to stop it is to soft reset the device. This is only when using WM2003.
refer to WMODEM search in forum i have 2 topics that will reply in details to your questions
ok, check this out...
I am using a att tilt(TyTN II=Kaiser) and i have all the settings in my Viata PC to use it for a mobile modem and it keeps telling me that WModem.exe is erring...
Here's the specs of my device....
ROM version 3.57.502.2 WWE
ROM date 07/17/08
Radio version 1.65.21.18
Protocol version 25.88.40.05H
I did a ROM upgrade myself some time ago from 6.0pro to 6.1pro and would just re-flash and update again to recover lost or corrupted data on device but i cant even remember how the heck i did it in the first place...
Can you help me, ANYONE?
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
I am using vista and I was trying to flash my phone to the one provide by 3g in Australia. I updated the usb driver. During the update process someone unplugged the cable!!!!!
Now my phone doesn't pass the windows mobile logo and be able to get in the boot loader mode. Is my phone dead? I tried that rom again it says error 294 invalid vender id. I also tried to upgrade it to wm6 but always get 262 update error which says communication error.
Any help???
Thanks in advance
hi Richard,
for other reasons it looks like you have the same problems I had:
http://forum.xda-developers.com/showthread.php?t=319625
In this thread I have summarized my problems - and there was a procedure to fix it (at least for me) - it will take some hours to get everything DL and installed & compiled
When you need it I could describe more detailed what I did after I got my phone back to live via KITL
hope it will also work for you
Matthias
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
ERMANO.ESTE said:
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
Click to expand...
Click to collapse
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
How to get mac address
lakeman said:
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
Click to expand...
Click to collapse
Thanks alot lakeman for ur help.
SOLVED OUT THAT ISSUE, BUT FACED A NEW ONE.
I M STUCK AT BOOTLOADER SCREEN WHILE TRYING TO INSTALL WM6.5.
BUT I FIGURED OUT A WAY BY USING MAC AND MTTY FORMAT.
BUT I DONT KNOW HOW TO GET MY MAC ADDRESS WHILE THE ONLY THING I CAN ACCESS IS THE BOOTLOADER SCREEN?
IS IT PRINTED SOMEWHERE ON MY DEVICE OR MANUALS OR IS THERE ANY SPECIFIC COMMAND FOR THAT?
Hi,
I have a Touch Pro II mobile and i am trying to update it with the Deepshining X9.23128 ROM, but are unable to do so.
I have taken a hard reset off the phone aswell.
Synch is set up and is working, the phone goes into the update section, but on the loader it only shows 0%.
h tt p://bildr.no/view/698785 (I am not allowed to upload pictures, but you can find the picture here. It is a norwegian site)
ERROR [262]Update Error
The ROM Update Utility ecnountered communication errors during the update process
This is the error message that comes up. Someone know what is the problem here ?
Welcome to XDA!
Please use a search before posting a new thread.
Every hTC device have it's own forum and it's the first place to look for ongoing discussion about device.
Did you HARD-SPL your device?
Take a look [here] and if you can't find answer to your question post it in Touch Pro2 General section [here].
You may have better response there.
communication error
i have the same problem
were you able to find a solution?