while i was updating my O2 XDA I to wm 2003 my computer freezed and my XDA had freezed on installing screen. Even I had reset my computer I still cannot open my XDA. There is an strange display on my XDA screen, also when I connect XDA to the cradle , my computer can see the XDA, but I cannot update my XDA as I can't reach to active sync
i would use the sdcard flashing it's the most stable way to upgrade xda1's
here is a guide
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
THIS THE FRIST TIME IN THIS SITE AND I FOUND IT IS MORE HELPFULL
FOR DEALING WITH POCKET PC
SO FOR HELP IF ANY ONE GET ME SHORT STEPS FOR UPDATING ANY POCKET PC AND FOR KNOWLDGE HOW TO UNLOCK POCKET 1010 & 2020
AND SPV E200 OR OTHER MODLES OF SPV AND IF THERE IS TOOL TO UNLOCK BLACK BERRY 7230
BE THX FOR ANY HELP OR REPLAY
B.R
ROBISH
Upgrade
QUOTE
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
This is from rudegar.
Another way is to goto lumpistephans ROM kitchen cook yourself a ROM and upgrade. I did it with 2003 and it works fine.
Good luck,
Robert
hi all, help me to back up my roms plzzzz
my ori rom is
Rom v 1.03 USA
n bootloader mode v 1.02
i wanna upgrade to wm2k3SE
but i cant back up my rom ?
if i wan to back up always pop up notice
Card initialize is failed ??
wat thats means ?
thzzz for ur anssss
While a lot has been written, the following should provide an easy-to-follow guide:
Preparation:
1. A torch (read on and you will know why)
2. 256M SD card
3. Download ntrw.exe, romupdate.exe, hexedfull.exe from the ftp of this forum to c:\ and install hex editor
4. Download the appropriate ROM file (hereafter referred to as "newrom.nb1"). Somehow, these rom files seemed to be deleted from this ftp. I will upload them later.
5. Cancel USB in ActiveSync
6. Use Sprite Backup to backup your ppc
Backup original ROM:
1. Put ppc into the boot loader mode (hold both on/off and camera buttons at the same time while resetting).
2. Insert empty SD card.
3. Connect ppc to pc through USB.
4. Run romupdate.exe on pc.
5. Select “\\.\WCEUSBSH001” in port settings. In the popup windows, enter “d2s” and press enter.
6. Don’t get panic to see the ppc screen goes dark. Use your torch and you will see the download percentage. Wait until it reaches 100% and shows “CheckSum is OK!”.
7. Insert SD card into card reader of the pc. Ignore the “format SD card” message and click “No”.
8. Run “command” to go into DOS prompt and change to root directory (cd c:\). Enter “ntrw read oldrom.nb1 s:” where s is the drive of your SD card.
9. Ignore the “Data error <cyclic redundancy check>” message. You should save another copy of this important rom file “oldrom.nb1”.
Change header of newrom.nb1:
1. Right click on oldrom.nb1 to open hex editor. Copy the first 220 bytes.
2. Open the downloaded newrom.nb1 file and overwrite the first 220 bytes with those of the old rom.
3. Save the edited newrom.nb1. You may save another copy of this important file.
4. Go to the command prompt and enter “ntrw write newrom.nb1 s:” to write it to the SD card. Ignore the error message “The parameter is incorrect”.
Update the ROM:
1. Insert SD card into ppc and put it to boot loader mode again (on/off + camera + reset). Use you torch to check the dark screen.
2. When it shows “Press Power to flash”, press the on/off button. Wait until it reaches 100% and ignore the message “Download Fail - CheckSum Fail”
3. Soft reset your ppc.
4. You may have to reinstall your software, unless you are familiar with the advanced features of Sprite Backup.
or u can find at http://forum.xda-developers.com/viewtopic.php?t=19500&highlight=rom+backup
thanks to talent and all XDA Dev
Phreakazoidz
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
This topic has been posted in many threads, there is no need to use the SD if this procedure is not done correctly you will loose the bootloader all together. Instead use the method posted by Luchao:
1.run atom 0416 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2.run july exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3. flash
http://forum.xda-developers.com/viewtopic.php?t=52925&postdays=0&postorder=asc&start=150
i just saw eboot.nbo & test.zip file in windows/temp/ folder, how to get the others file ? Thanks.
activesync mode not working
i tried the activesync mode, but not working.
finally i used bootloader method. just copied eboot.nb0 file to your miniSD. and enter bootloader mode.
Re: activesync mode not working
klikman said:
i tried the activesync mode, but not working.
finally i used bootloader method. just copied eboot.nb0 file to your miniSD. and enter bootloader mode.
Click to expand...
Click to collapse
bro, just klik next one more time, and DSUU will extract the others files
tjs0509, I tried your sd card method and totally lost the bootloader when I tried camera and soft reset. Is there anyway to bring back the bootloader?
interesting methods...
thanks!
"Camera" + SR, connect USB, run Device Software Update Utility, flash...
dear
tjs0509
I Downloaded the 20060426 from www.seeo2.com
2. Run DSUU, after extracted the files in directory windows\temp DO NOT CLICK NEXT
3. I Copied all 6 files into temporary or another directory
4. copied 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, renamed diskimage_ver.nb0 into diskimg.nb0
6. Now, I maked bootloader by pressing camera and soft reset ( I had to put my mini SD into your Atom so that the bootloader boot from mini SD
(from 1 to 100 dowloded)
7. I seem and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that My screen was blank,
9. I Pulled out my mini SD and connect USB my pc . After I waited since 2 hour .screen been Black.. black... Black..I tried soft reset .and batery out -in but not anythink .
I was worring .!!??
Can help me What can I do?
Homer285, any help. I really lost the bootloader in the SD card method. I tried to connect USB and the 0721 ATOM EXEC recognize the ATOM, but when downloading the ROM, the ATOM just rebooted. I cannot press camera and reset to go to bootloader mode. Is bootloader mode be activated by a program in SD card so that it can be run in the explorer. Please help.
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
this method broke my bootloader too. i spent about RM200 to repair my bootloader...grrr
I have hd2 stuck on spl with unknown symbols on model field
Can not install any thing
I tried to install the official rom & custom rom (NO luck)
please help me
look at the pics attached
bluerahaf said:
I have hd2 stuck on spl with unknown symbols on model field
Can not install any thing
I tried to install the official rom & custom rom (NO luck)
please help me
look at the pics attached
Click to expand...
Click to collapse
If I was you I would be install (the risk aria/branded) stock ROM over SD-card.
kurt-willems said:
If I was you I would be install (the risk aria/branded) stock ROM over SD-card.
Click to expand...
Click to collapse
Thanks but please be more specific
And by the way my official rom is
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Take that rom and upack it with wrar and the name the .nbh file into leoimg.nbh and the copy it to yout sd card. You sd card must be formatted into fat32. Put your sd card in the phone and go into the bootscreen (hold down the volume button and press the power button to do that). Then follow the instructions on the screen.
bluerahaf said:
Thanks but please be more specific
And by the way my official rom is
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Click to expand...
Click to collapse
Like Abdul9. mentioned:
1. Download from HTC's website the official ROM with your S/N and extract the RUU file with 7-zip or power archiver to desktop.
2. There wil be a file named ruu_signed.nbh on your desktop. Rename that to leoimg.nbh.
3. Copy this file to the root of the SD card, preferably not larger than 2Gb.
4. Power off device and reinsert SD card.
5. Enter bootloader mode (press and hold vol down key and then shortly on/off button).
6. Follow the instructions.
Abdul9. said:
Take that rom and upack it with wrar and the name the .nbh file into leoimg.nbh and the copy it to yout sd card. You sd card must be formatted into fat32. Put your sd card in the phone and go into the bootscreen (hold down the volume button and press the power button to do that). Then follow the instructions on the screen.
Click to expand...
Click to collapse
kurt-willems said:
Like Abdul9. mentioned:
1. Download from HTC's website the official ROM with your S/N and extract the RUU file with 7-zip or power archiver to desktop.
2. There wil be a file named ruu_signed.nbh on your desktop. Rename that to leoimg.nbh.
3. Copy this file to the root of the SD card, preferably not larger than 2Gb.
4. Power off device and reinsert SD card.
5. Enter bootloader mode (press and hold vol down key and then shortly on/off button).
6. Follow the instructions.
Click to expand...
Click to collapse
Did that many times with many roms >>> did not work
bluerahaf said:
Did that many times with many roms >>> did not work
Click to expand...
Click to collapse
Many Rom's????
You just need it to do with the right stock Rom.
kurt-willems said:
Many Rom's????
You just need it to do with the right stock Rom.
Click to expand...
Click to collapse
I did try the right stock Rom.
But no lock.
bluerahaf said:
I did try the right stock Rom.
But no lock.
Click to expand...
Click to collapse
I m sorry to say but I think it is either hardware related or SPL related problems. Maybe it is now the time for you to bring it to HTC repair center.
Good luck