hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
Related
Please any one come across Error 101:Connection Error in HimaUpgradeUt.exe ? I was using Tmobile 1.72 beta and trying to upgrade to imate 1.72 Official, the upgrade program started, and hang at 40%, forced to reset, and my O2 hang at O2 Splash screen.
I tried hard-reset, and still hang at O2 Splash screen, and when I try to reinstall/upgrade/download, the upgrade program prompt me this error 101:connection error, any one have this before.
Please help, thanks
Reset your device into bootloader (arrow any direction + power + soft reset)
Disable any firewall you may have on your PC (I have had problems with ZoneAlarm)
Restart the upgrade program
I had a problem with Zone Alarm as well. I didn't need to hard reset, though.
Hi guys, thanks for your speedy reply. My friend do not have the patience to wait, so have send to service centre in Singapore and they have help him to solved the problems and with O2 1.66 ROM (FOC)
Thanks guys, you are great, and great forum
Hya
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
It doesnt do anything anymore
Now I got a white screen with upper writing "SERIAL"
and down "V1.03" and no backlight at all...
Can somebody help/guide me how to fix my device?
I'm a newbee and need yoru help
Many thanks.
'Serial' just means that its trying to communicate in Serial mode, if you drop it onto the dock/charger (assuming that is connected to your PC) the word 'Serial' should change to 'USB'. If it does then try the downgrade again.
VW_ELM said:
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
Click to expand...
Click to collapse
Don't worry, it's not dead. If the downgrade process completed normally, you just need to do a hard reset (press power button while holding stylus in reset hole). If this doesn't help, the downgrade failed.
The most likely reason is that you connected the cradle to a USB hub. Try connecting it directly to your PC, then perform the flash procedure again.
Another possibility is that you used Windows 95/98/ME. Some users have reported problems. Try the flash procedure from a Windows 2000/XP system again.
Hope this helps!
Daniel
nope it doesn't work, i've got the same problem!
Don't know what to do...
Thanks tadzio: B4 l have same problem Rom failure , and l try to reinstall
again, flash Rom now :lol:
I post a original latest belgian rom on this forum (rom from dangard), try to install this version.
http://forum.xda-developers.com/viewtopic.php?t=8403&postdays=0&postorder=asc&start=75
you need to dowload this file (a shortcut) on your pc, then execute it following the procedure.
Bye
I solved the problem for me:
With HimaUpgradeUt.exe there was no connection. It was a too old version (0.5.0.0).
So I replaced it with Version 0.6.0.0 and it runs !!!
Hello all, i need some help with mi Qtek 1010, i was trying to downgrade from version 3.04.00 Eng WM2003 SE to version 4.01.16 eng, with a usb cable sync and charge, it´s starts with upgradig but for mi bad luck i receive a message in pc that it was an error to do a softreset in xda, but the only thing i receive in display is upgrading and nothing more, i´ve already try to make the upgrade but now with the cradle and nothing, i´ve already try to copy an rom to sd card with osimage tool start in rescue mode to install from the sd card and do nothing, i´ve no option to flashing from the sd-card!!!!
Please help me, anyone!!!!!!
Forgeret...
I´ve been successful, with some help, residing in this forum, thks guys, i dont know what i could do because of this magnificant site...
thanks to all... :lol:
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
my dopod 818 pro(htc prophet g4) can't power on.
i need help to find the way to repair it.
i've looking in many pda forum, they talk about rewrite/reprogram the bootloader(i can't enter into bootloader mode).
they use something about jtag programmer, could anybody tell me how to use that thing(i'm newbi).
or is there anyway else to fix my problem???
I have the same problem with my Qtek S200 G4
this Jtag Pinout for HTC prohpet G4 ~ http://img.majidonline.com/show/183593/wizardjtagpinsis8.jpg
ROM Upgradation Failed
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
aadi1 said:
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
Click to expand...
Click to collapse
try reflash with the official rom