Guys
Is there a suitable voice dialer available for XdaII?
I was advised to look at "Voice Dialer 2.1" but couldn't find it.
Any help would be appreciated
Ian G
Hi
I am using Fonix Voice Dial on my QTEK 2020 and it is working pretty fine.
You should find all necessary informaition http://www.fonix.com
Ciao
Gerhard
Voice Dialer
Thanks Gholzer
I'll take a look
Regards
Ian G
Sorry Gerhard I got the names mixed up!
The link failed but I will look around the web
Thanks
Ian G
voice dialer
There is a newer version of the software that can controll the fone via voice recog, as well as call contacts, which looks quite cool.
http://www.pocketgear.com/software_detail.asp?id=4659
Hope This Helps
Smiley
Thanks Smiley
I'll give it a go!
Regards
Ian G
After buying Fonix Voice Dial, it was ok for a bit since it was the best one available at the time, but after trying the Microsoft VoiceCommand for a bit, it proved to be way better than the Fonix since it was more tolerant to noice and had more functions than just voice dialing.
I use VITO voicedialer PE 3.0 and it works great for me!!!
I have tried Microsoft Voice command and Fonix Voice Dial, but neither worked good for me. In VITO voicedialer you add your voice to the contacts you want to be able to call. The reliability is high, even in noisy conditions.
http://www.vitotechnology.com/en/products/voicedialerpe.html
/Oggi
Related
Don't know if this has been posted before or not.
With the Prophet and Wizard Cyberon Voice Commander would work once via BT then die because it left the audio gateway open. After installing the Dopod 838 Extended ROM on my TyTn (I wanted Voice Commander) it works properly! I can issue a call via hitting the button on my headset after the call I hit the button again and Voice Commander works answers!
Anyway thought I would share.
Thanks
Do you get all commands routed through the headset everytime? With my Nokia BT Stereo headset the first time invoking Cyberon voie dial or the full voice command from the headset I get confirmation through the headset. after that all sounds come from the phone speaker. Also what BT headset do you use?
Give me an example of what you are doing and I will try to replicate here on my end. If you are referring to Dialing a contact or number yes it does work properly
I am using the Plantronics Voyager 510S
All I'm trying so far is just to get all voice commands and confirmations through my BT headset. Pressing the voice dial key on my headset starts Voice dial/Voice command and I hear the prompt in the headset earpiece. Pressing the headset voice dial button again starts voice dial but now the voice dial prompt comes from the phone speaker. I think this may be a headset issue, not sure how Nokia has implemented the Handsfree profile.
On my Plantronics I press and hold the button the headset I hear a beep then 1sec later I hear another tone I release it I get 'Say a command' If I say Dial John Smith I get confirmation home, mobile etc after I confirm I get 'Dialing' all this is through the headset. Is this what you are asking?
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Yes, I know you mean the full Cyberon Voice Command. That's what I have been trying as well.
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
Bought it don't like it, it rarely understands my voice and Cyberon Voice Commander works with my BT headset without hacking the reg, I don't need it to announce the time, appointments etc. just voice dial.
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
I do own MS voice command and even with the reg hack it doesn't work well over bluetooth. The Cyberon software just works.
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
efjay said:
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
Click to expand...
Click to collapse
I shotgunned it and installed the entire Dopod Extended ROM since I did not know which cabs were the Voice Commander files, which ones did you reinstall?
Glad it's working for you!
The two files are:
D_CVC-PPC-WWE-606161-DopodHermes.CAB
PT_CVC_Path.sa.CAB
I didnt install the second file. You could also install this one to map the voice command button during install rather than manually going to settings
P_Button5_VCommand.CAB
I wonder why the Dopod phones always seem to come with the full version and other versions only have the Voice dialler version. At least HTC should give us the option to purchase the full program.
can I flash Dopod Cyberon Voice Commander to new ROM 1.35??
False alarm, I should have read better. THANK YOU VERY MUCH EFJAY!!!
Didier
hello!
I own a X7500 HTC witrh the official WM6 WWE and I'm having a problem.
I use LG Style-I and Jabra BT8010 headsets and when one pairs to the X7500 the Cyberon Voice Speed Dial starts and sometimes even makes me a call.
Does anyone has this anoying and sometimes expensive problem?
How can I fix this?
Best regards
Deiota
Does Anyone has this problem?
Thanks!!!!
Don't have that problem but I don't use it. Also no longer in the ROM I'm using, PK's 2.0. I use Microsoft Voice Command, works much better in my opinion. Also allows you to confirm via voice before dialing which is safer.
Yes, I know that, but the problem is that is in english.
And some names are very dificult for it to understand....
Best regards
Deiota
Is there a rom out for the Hermes that supports call recording and voice dialing? Or are there cabs that I can install for these functions?
Thanks,
GunRunner
For call recording there's LivePVR, I tried it only one time but it seemed to work with my V1605 when I still had WM5.
Vito Audio Notes
Great program that is easy to use and has great sound quality.
VITO Audio notes works great...definitely worth the $15 to register...it will come in handy when my ex calls and tries to start sh!t with me again...it never fails...and I have already warned her that I was going to start recording all my calls with her (not illegal in my area).
I'm trying out Cyberon Voice Speed Dial now, but I would like to try out MS Voice Command, but they'll have to wait for there $40...lol
GunRunner
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
No Voice Dialing
It is not possible at this time, because TP2 has another blue tooth stack (see also different threads here).
Gerhard
just a matter of time though mate..... prob happen soon <fingers crossed>
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
VoiceDialing via Bluetooth handsfree
leanne said:
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
Click to expand...
Click to collapse
Can you cut out your ROM VoiceDialing software and share with us?
I have a Russian ROM and it does not have any VoiceDialing, but I would like to have one.
Nottz_Jay said:
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
Click to expand...
Click to collapse
Voice dialing works great on the TMo version. Not as quick as before with my previous MDA. I say dial "XXX mobile" and it responds "dial XXX mobile" and I say yes and it calls. Also works for app launches etc.
Cyph
Does it work via Bluetooth Handsfree without pulling phone itself?
hecksk said:
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Parrot ck3100 does, but I think it has the voice control software itselft...
I used to use aged SonyErricson T630 + HBH835, I had voice dialing with. But TP2 should be some kind of "PRO" ... well do you think it is impossible to activate this feature at all???
This is great news it is possible actually, but can you tell what kind of Bluetooth stack you have in your TP2? If I go to info dialog it says vesion 1.9.0 Build 4400, HCIv4.72/LMPv4.33031(15). What do you have in it?
thanks a lot.
anyone knows if cyberon voice commander works on TP2??
cyberpunk627 said:
anyone knows if cyberon voice commander works on TP2??
Click to expand...
Click to collapse
It works. But PTT function of bluetooth handsfree does not anyways.
thank you very much hecksk. it's the only software having italian TTS to read sms (useful when driving or - as it often happens to me - your hand are busy holding the work bag, jacket and so on). bluetooth ptt means that I can't use by headset to give commands, right? awful then... I hope that someone will come out with a solution soon... strange that such an important feature is missing on a businness device like this..
HTC support said, that they have no idea why bla-bla-bla, please contact handsfree manufacture (SonyErricson) and voice dialer (VITO).
It's funny answer seems like standard reply form. Sad.
Hope there is some solution for this issue...
So if I palnning to get a " Blueant Q1 " Bluetooth headset will it work with T-mo. TP2?
Anyone using Blueant Q1 ???
I upgraded to wm 6.5 to get my bluetooth fully functional.
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Yes it does.
what version of bluetooth driver(stack) do you use for?
please describe how did you make it?
because mine TP2 does not work with SonyErricson HBH-IV835 handsfree, I used use it with SonyErricson phone and also checked with Nokia's...worked fine.
read this!!!
palah said:
Update... HTC tech informed yes MSVC is working correctly as tested on the TP2 units they use ... the 'Dopod' reference on post above referred to the brand of Headset not the dopod pda....
So voice activation via BT headset on MSVC works on some units not on others (depends on your rom) ... his advice... activate MSVC via the TP2 until a rom update... he said check weekly to see if one happens (so must be in pipeline) He also said Microsoft was working on MSVC as it does not play 100% with new Bluetooth Stacks so expect a new version (from v1.6) some time in future ... seems unless an industrious person finds a cab fix ... the only other option now, is find a rom that works and use that (which can bring other issues)
Click to expand...
Click to collapse
this post belongs to this thread: http://forum.xda-developers.com/showthread.php?t=554751&page=3
this looks super good, I'm so happy guys! Let's hope that it is all true, and not just smoke in our eyes
Does anybody know of a good rom that supports Voice Dialing and Search? I am currently using Energy Rom and it does not support Voice Dialing or Voice search. On T-mobile stock rom, you can assign the send key to Voice Search and Dial. Is there a non-oem rom that supports this feature?
Thanks for your input.
DensoYamaha41 said:
Does anybody know of a good rom that supports Voice Dialing and Search? I am currently using Energy Rom and it does not support Voice Dialing or Voice search. On T-mobile stock rom, you can assign the send key to Voice Search and Dial. Is there a non-oem rom that supports this feature?
Thanks for your input.
Click to expand...
Click to collapse
I'm pretty sure this feature is only enabled for android phones, and as far as I know has never existed for winmo. If you want this feature simply put android on you hd2.
For sure, latest Artemis V42 ROM (based on new 3.14 HTC ROM) supports Voice Dial via Cyberon Voice Speed Dial.
I've tested this on my HD2 with my old Motorola H605 bluetooth Headset.
I'm able to start voice recognition with headset button and speak through headset microphone the name of the contact to dial or the application I want to start.
Moreover all system sounds (also MP3 music or IGO8 voice) are routed to headset.
In this case the sound quality is low (H605 is not an AD2P device) but it can be recognized very well.
regards !
mabold