Don't know if this has been posted before or not.
With the Prophet and Wizard Cyberon Voice Commander would work once via BT then die because it left the audio gateway open. After installing the Dopod 838 Extended ROM on my TyTn (I wanted Voice Commander) it works properly! I can issue a call via hitting the button on my headset after the call I hit the button again and Voice Commander works answers!
Anyway thought I would share.
Thanks
Do you get all commands routed through the headset everytime? With my Nokia BT Stereo headset the first time invoking Cyberon voie dial or the full voice command from the headset I get confirmation through the headset. after that all sounds come from the phone speaker. Also what BT headset do you use?
Give me an example of what you are doing and I will try to replicate here on my end. If you are referring to Dialing a contact or number yes it does work properly
I am using the Plantronics Voyager 510S
All I'm trying so far is just to get all voice commands and confirmations through my BT headset. Pressing the voice dial key on my headset starts Voice dial/Voice command and I hear the prompt in the headset earpiece. Pressing the headset voice dial button again starts voice dial but now the voice dial prompt comes from the phone speaker. I think this may be a headset issue, not sure how Nokia has implemented the Handsfree profile.
On my Plantronics I press and hold the button the headset I hear a beep then 1sec later I hear another tone I release it I get 'Say a command' If I say Dial John Smith I get confirmation home, mobile etc after I confirm I get 'Dialing' all this is through the headset. Is this what you are asking?
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Yes, I know you mean the full Cyberon Voice Command. That's what I have been trying as well.
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
Bought it don't like it, it rarely understands my voice and Cyberon Voice Commander works with my BT headset without hacking the reg, I don't need it to announce the time, appointments etc. just voice dial.
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
I do own MS voice command and even with the reg hack it doesn't work well over bluetooth. The Cyberon software just works.
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
efjay said:
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
Click to expand...
Click to collapse
I shotgunned it and installed the entire Dopod Extended ROM since I did not know which cabs were the Voice Commander files, which ones did you reinstall?
Glad it's working for you!
The two files are:
D_CVC-PPC-WWE-606161-DopodHermes.CAB
PT_CVC_Path.sa.CAB
I didnt install the second file. You could also install this one to map the voice command button during install rather than manually going to settings
P_Button5_VCommand.CAB
I wonder why the Dopod phones always seem to come with the full version and other versions only have the Voice dialler version. At least HTC should give us the option to purchase the full program.
can I flash Dopod Cyberon Voice Commander to new ROM 1.35??
False alarm, I should have read better. THANK YOU VERY MUCH EFJAY!!!
Didier
Related
Hello everyone,
I have tried the two reg patch by Sin () to add the Handsfree profile to my Qtek 2020 (with WM2003SE). I use the very good Bluetooth headset by Globalsat BTH-808, and I have seen these things:
- When in Headset mode: the blu BT Led on the Globalsat flash one time per second. If one call incomes, an icon on the top bar light on in my Qtek and I can use the Globalsat to answer the call, or I can transfer audio back to Qtek and use it to answer the call.
- When in Handsfree mode: the blu BT Led on the Globalsat flash three time per second (awful). An icon noticing the HF Profile is ever on the top bar (with or without a call incoming, and this is not good, i think). If one call incomes, I can use at the same time the Globalsat or the Qtek (audio comes out from the Qtek and from the Globalsat).
Where is the good useful way of this? Why do I need the Handsfree profile too? to make voice dialing (adding relative software)? I didn't liked it and I disabled back the HF profile...
Can someone explain to me how the Hadsfree profile is good?
Thank's
facts
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Headset will not do caller ID but I believe it may offer better battery life.
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Re: facts
ccrrazzzy said:
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Click to expand...
Click to collapse
Hmmm, no... with my device (Qtek 2020, aka XDA II/MDA II and WM2003 SE 2.06) the CallerID works great with either Headset profile and Handfree Profile...
ccrrazzzy said:
Headset will not do caller ID but I believe it may offer better battery life.
Click to expand...
Click to collapse
Yes this is real: Headset is more light for battery life cause it lets BT headset to go online only during call incoming...
ccrrazzzy said:
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
Click to expand...
Click to collapse
According to me you are wrong, cause my device have the headset mic working in either Headset and Handfree profile. The only practic difference between the two profiles are that HS goes idle and come online only during call incoming, instead HF is online not stop.
ccrrazzzy said:
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
Click to expand...
Click to collapse
Again... with my device all works fine, but I don't like the headset all time in waiting/online modem with its led blinking speedly and the boring icon on the top bar (so if you miss a call or receive a sms, you see the baloon tooltip to advice you that more than 1 alert are waiting). I don't know about your bugs cause I never tested these cases
ccrrazzzy said:
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
Click to expand...
Click to collapse
I am yet not happy about the WM2003SE 2.06WWE speed on booting and its stability... so I will not go further on with Magneto/WM2005... When I will be able to do, I will buy a new device with Magneto natively working...
ccrrazzzy said:
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Click to expand...
Click to collapse
Good flashing and have a nice weekend!
The difference between the two right now using WM2k3SE is:
Handsfree allows you to redial the last number using your BT headset (hold headset button for 2-3 secs).
Headset allows to use the BT headset to talk on the phone.
Other than that they don't do anything else with the current OS (at least for me)
tesking
I am using a Jabra BT800 and I have talked to people who are using Erickson HBH200 and HBH660 and one guy who is using an xLive. The people I have talked to using 2.02 or 2.06 or Sin's 2.02-2.06 merge, all said these devices are not having the caller ID working and the Hands Free would give them the stereo affect.
You are the first.
I have tried 2.02, 2.06 and the Sin's combined one. All would not display properly with the caller ID on my BT800. And even with the addition of the reg key, hkey local machine, software, Microsoft, Bluetooth, "HandsfreeProfileOn", I would get the caller ID, only if the number was not in my contacts and it was not already in my call history of the BT device.
I have also tried BT tools, I have tried every patch and tried all the widcomm stuff too.
I am very curious to know what you have for a ROM and any BT additions or patches and I am very interested to know what caller ID BT device you have.
Maybe you misunderstood what I was saying as well, please know that I was talking about caller ID being displayed upon the BT device, not the phone.
One other thing that Hands free does is allows for the possibility of BT activated voice dial. Like the the voicesignal program on my MPX300.
There has to be a hardware specific driver for each device so when you press the button, it transfers the audio and Mic to the BT headset and starts the voice recognition program. Other wise, we would have had BT voice dial on our HTC devices by now. http://forum.xda-developers.com/viewtopic.php?t=15191&start=50
ccrrazzzy
I misunderstood the BT device you're using for caller ID (I don't have such device, I was talking about the phone itself).
As far as redialing using the Headset, I am using the Motorola HS850 and I was able to use it to redial the last number. However I end up turning the Handfree off when I don't need it in order to avoid the Mic issue on the headset. When I paired the headset, I chose headset profile only. When ever I need the handfree capability, I normall go under Start/Settings/Connections/Bluetooth/Devices hold my stylus on the device (HS850) then choose "Set as Hands-free" on the pop menu.
For Crrrrraaaazzzyyy:
For Crrrrraaaazzzyyy:
Sorry for your device... I can tell you that with the Globalsat BTH-808 (see the ebay link below), it works smooth in headset Profile (1 or 2 seconds and I can answer from the headset button), and it works smooth in Handfree profile (but as I said, i don't like the behaviour): you can buy the headset from here
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=6334980179
Have a nice day!
BT
Sorry I was not clearer at first. I was speaking about the caller ID on the BT headset or in a BT car audio system.
Hands free is needed to have features like caller ID on the BT device and voice dial and to be able to scroll through the BT device's caller ID history and make calls from that while leaving your cell phone safely tucked in your briefcase or hip case.
With my MPX300, because it supports BT voice dial through the BT headset, and with my caller ID on my Jabra BT800 BT headset, I can have all the power of my phone on my ear; being able to make calls through the caller ID history and through dialing via voice dial by speaking the phone number OR speaking the contacts name AND be able to see who is calling me, all while my cell phone-PDA is about 30 feet away!
I just wish we had this on the XDAII because I hate my MPX300; small screen and low memory make it useless.
Through the 2.20 OS, I am able to get caller ID functioning somewhat, but I have to disable call waiting. However to get BT voice dial to work, we will need someone to make a driver like the one that is in the MPX300 and use software like FONIX or www.voicesignal.com
Here is how we can make voicedial work on BT.
http://forum.xda-developers.com/viewtopic.php?t=19233&highlight=
XDAII-TSM500 and Jabra BT800 incompatibility ???
I cannot use neither the microphone nor the headphone of the BT800 instead of the XDAII for listennig mp3 files or recording notes.
When I use headset mode, I can speak and hear throuhg BT800 and it is possible to use the buttons to answer and hang during a phone calling, but is not possible to dial, see the caller number and other features.
When I use handsfree mode, I can get most of features but the BT800 microphone does not work and I have to use the one of the PDA.
Any way, only it is possible to use the BT800 in phone mode, not in PDA mode. However it works perfectly whit my IPAQ.
Could anybody give me any idea ?
BT
Please read everything.
Again,
With a caller ID device like the BT800, it needs Hands Free mode to work right. 2.02 and 2.06 do not do Hands Free well.
Only 2.20 and 2005 but 2005 has other bugs. In 2.20 you must disable call waiting or live with clicking upon Tools, Hands-Free Off, then Tools, Hands-Free On to resume the sound on the BT headset when you try to switch back to the first call. You will have to do this even if you ignore a call.
2005 works VERY well with BT and the phone but there are other bugs like lack of memory and database not compatible with third party programs.
I am sorry ccrrazzzy
I did not mention I have two other poblems:
One is that I am a beginner whith these machines, less than two weeks working whith them, and some concepts are confusing to me.
The other is, my short english (obvious ?) make me misunderstand things and to explain them is even worse.
I understood that all problems appear using the phone and not using the PDA for listening mp3 files, for example. When I use the BT800 whith my IPAQ 5500 (headset only) works like a wired headphones and I thought that it should work in the same way whith the XDA, forgeting the phone features.
I will try whith 2.20.
Many thanks for your answer and excuse me.
mp3 will not work unless you get http://www.bluetake.com/products/BT420EX.htm or the HP one.
While using Headset profile, in 2.02, 2.06 and 2.20, The BT800 will work but I experienced an 8 or 9 second delay before call is transfered to the headset when someone call me. Calling out is OK.
Hands free and 2.20 is only good way with BT800.
No audio on BT headset on the XDAII, no matter what OS... Like the mono audio on your other pda, it will not work on xdaii.
I am trying the xLive now, will post results. It has built in MP3 player and is BT cell phone Hands free. Only $90.
These will not make you look like you are from outer space
http://www.itechdynamic.com/html/border22.htm
Support HiFi audio, stereo but I doubt they will work on the XDAII.
You could make them work with the widcomm stack but that stack does not work with Hands Free and I forget if it works with Headset.
If this thing had caller ID and worked for sure with the XDAII, I would get it.
hi everyone..my bluetooth headset works fine, but i cant get the ms voice commander to work with it. i have jiggs wm6 on a xda atom. even without the voice commander when i press my bluetooth headset it wouldnt do anything. it would just bleep and nothing happens. anyhelp would be great.
pgonzo2k said:
hi everyone..my bluetooth headset works fine, but i cant get the ms voice commander to work with it. i have jiggs wm6 on a xda atom. even without the voice commander when i press my bluetooth headset it wouldnt do anything. it would just bleep and nothing happens. anyhelp would be great.
Click to expand...
Click to collapse
Right now dude, the WM6 unofficial ROMs do not have any support for the streaming audio, but on certain Bluetooth models, the MS$ Voice Command works well. You'll either have to wait for someone to actually make the right drivers to work with the WM6 ROM or go back to the official ROM.
so it should work on this Xda-Atom-ENG-20060426-MOT0822 rom. guess ill have to go back to the official rom..cant freakin drive and look up a contact on this thing. thanks.
Hi Guys
I have a Telstra (latest ROM) JasJam and a Jabra BT5020 headset.
I have been trying to get MSVC 1.6 to work through my headset without success.
I tried the 0.9f patch which didn't help. see page 15 of-
http://forum.xda-developers.com/showthread.php?t=283412
Interestingly I tried the patch with out MSVC installed and it worked to get audio to my headset but the sound was crappy and I didn't bother to keep it.
With MSVC 1.6 I used the UK version which is better for the Australian accent rather than the American one.
It worked OK but the digit dial was a pain as I couldnet get it to understand 66 which most of the local numbers start with and digit voice dial is what I most wanted.
Also getting MSVC to play music was a pain as I don't use MS Media Player to transfer and sync music. I found the music I transfered using media player would'nt paly. I just transfer direct to my sd card and it works much better, but MSVC doesn't pick up the file names I use so can't identify the album or track I want to play.
Back to MSVC and getting it to work with my BT headset. I read through the forum and tried various things without success so I have given up on MSVC for the moment.If MS issue an update I may reconsider.
I have a solution for those that are interested and want voice command through a BT headset.
I went to the Cyberon web page (Cyberon Voice speed dial v1.1 is loaded in the JasJam by default) and downloaded and installed the CSVD patch for Cyberon voice speed dial to update to v1.2 ( I don't know if this was necessary for voice command functionality but I did it anyway)
http://www.cyberon.com.tw/Technical3.php
I then downloaded and installed Cyberon Voice Commander v2 from this site
http://forum.ppcwarez.org/viewtopic....=voice+command
More info
http://www.cyberon.com.tw/pro-solAG1-1.php?NO1=1
This works through my BT Headest. When I press the button on the headset it activates Cyberon Voice Commander and I can give and listen to commands and make and receive phone calls. When you press the button on the JasJam, Cyberon voice speed dial activates, so I mapped a voice tag for Voice Commander so that I can activate Voice Commander when the bluetooth headset is not being used. I did not want to map the button to Voice Commander because I wanted to keep speed dial.
Voice Commander is operated by default by pressing the button on the headset.
You need to train Cyberon Voice Commander(CVC) with your own voice for digit dial but that means that voice digit dial is much more succesful (for me ) than MSVC.
With regard to music CVC recognises the file names in my Music folder in My Documents so I can play the tracks I want that MSVC could not.
While the voice quality of the responses from CVC are not as sexy as the british MSVC respones it is still OK for me.
What is best of all, it works without stuffing around.
Interestingly when I turned off my bluetooth and turned it back on again the headset would not work. to get it back again I had to delete the partnership with the headset and soft reset and establish a new partnership to get it to work again.
I rang Imate on 1300850513 and told them my problem and they emailed me a patch "BT_Patch_3518_10.CAB" a 154kb file which I installed on my JasJam and soft reset established the partnersip and the problem is fixed. I can turn bluetooth on and off and not loose the headset.
So the long and short of it is that if you want voice command via bluetooth headset that works this is one solution.
I posted this at
http://forum.xda-developers.com/showthread.php?t=283412&page=44
as well.
Regards
Deadog
Use the updated MS VC file in http://forum.xda-developers.com/showthread.php?t=336908 its the 3rd post down.
Works fine on both my Jabra headsets..
can u help me ...?
hy frnds can u help me to find out games and sfotwear for imate jasjam
i cant find onthis web site,.
plz help me
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
No Voice Dialing
It is not possible at this time, because TP2 has another blue tooth stack (see also different threads here).
Gerhard
just a matter of time though mate..... prob happen soon <fingers crossed>
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
VoiceDialing via Bluetooth handsfree
leanne said:
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
Click to expand...
Click to collapse
Can you cut out your ROM VoiceDialing software and share with us?
I have a Russian ROM and it does not have any VoiceDialing, but I would like to have one.
Nottz_Jay said:
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
Click to expand...
Click to collapse
Voice dialing works great on the TMo version. Not as quick as before with my previous MDA. I say dial "XXX mobile" and it responds "dial XXX mobile" and I say yes and it calls. Also works for app launches etc.
Cyph
Does it work via Bluetooth Handsfree without pulling phone itself?
hecksk said:
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Parrot ck3100 does, but I think it has the voice control software itselft...
I used to use aged SonyErricson T630 + HBH835, I had voice dialing with. But TP2 should be some kind of "PRO" ... well do you think it is impossible to activate this feature at all???
This is great news it is possible actually, but can you tell what kind of Bluetooth stack you have in your TP2? If I go to info dialog it says vesion 1.9.0 Build 4400, HCIv4.72/LMPv4.33031(15). What do you have in it?
thanks a lot.
anyone knows if cyberon voice commander works on TP2??
cyberpunk627 said:
anyone knows if cyberon voice commander works on TP2??
Click to expand...
Click to collapse
It works. But PTT function of bluetooth handsfree does not anyways.
thank you very much hecksk. it's the only software having italian TTS to read sms (useful when driving or - as it often happens to me - your hand are busy holding the work bag, jacket and so on). bluetooth ptt means that I can't use by headset to give commands, right? awful then... I hope that someone will come out with a solution soon... strange that such an important feature is missing on a businness device like this..
HTC support said, that they have no idea why bla-bla-bla, please contact handsfree manufacture (SonyErricson) and voice dialer (VITO).
It's funny answer seems like standard reply form. Sad.
Hope there is some solution for this issue...
So if I palnning to get a " Blueant Q1 " Bluetooth headset will it work with T-mo. TP2?
Anyone using Blueant Q1 ???
I upgraded to wm 6.5 to get my bluetooth fully functional.
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Yes it does.
what version of bluetooth driver(stack) do you use for?
please describe how did you make it?
because mine TP2 does not work with SonyErricson HBH-IV835 handsfree, I used use it with SonyErricson phone and also checked with Nokia's...worked fine.
read this!!!
palah said:
Update... HTC tech informed yes MSVC is working correctly as tested on the TP2 units they use ... the 'Dopod' reference on post above referred to the brand of Headset not the dopod pda....
So voice activation via BT headset on MSVC works on some units not on others (depends on your rom) ... his advice... activate MSVC via the TP2 until a rom update... he said check weekly to see if one happens (so must be in pipeline) He also said Microsoft was working on MSVC as it does not play 100% with new Bluetooth Stacks so expect a new version (from v1.6) some time in future ... seems unless an industrious person finds a cab fix ... the only other option now, is find a rom that works and use that (which can bring other issues)
Click to expand...
Click to collapse
this post belongs to this thread: http://forum.xda-developers.com/showthread.php?t=554751&page=3
this looks super good, I'm so happy guys! Let's hope that it is all true, and not just smoke in our eyes
Ok, I took the advice of using a 3rd Party App for Bluetooth Dialing from the Bug on Jelly Bean.
http://code.google.com/p/android/issues/detail?id=35199&q=bluetooth voice dial&colspec=ID
First I Tried EVA. Which was very nice but it would only work ONCE per boot. 2nd Time it would prompt on the handset when I clicked the Bluetooth button.
Then I tried Cyberon Voice Commander. This works perfectly. But I can't get the Default to Stick across reboots. Every time I reboot I get "Complete Action Using" list. It works PERFECT after that and does not require the Network and does confirmation. There is no trial you have to buy and you have 12 minutes to test it. I think we should start a petition against Google on that. You should have 24 hrs to evaluate.
If I uninstalled Google Search I can get it to Cyberon to Stick (because it's the only choice on Bluetooth and does not prompt at all). But if you do that you lose Voice initiated Navigation which I use all the time. Google Voice Dial also works fine on the handset.
Some folks suggested Slingo, but I hate trying yet another app.
I've tried suggestions of repairing headset I even tied a full wipe.
I'm on MeanBean 1.1 but I doubt that has anything to do with it.
One way to fix it is, I believe, there must be a way to take Bluetooth Voice Dial out of Google Searches "capabilities" manifest. So that Cyberon is the only app for Bluetooth.
It was actually Vlingo not Slingo that someone suggested.
It appears Dragon Speech Folks acquired them or something.
Any way Dragon Mobile Assistant (Beta) and is free
https://play.google.com/store/apps/details?id=com.nuance.balerion&hl=en
It so far is working excellent !!
Never mind Dragon is "Broken" over Bluetooth too.
It doesn't actually switch to the Headset MIC.
It has amazing recognition and still a very nice app.
But if the phone is in my pocket in the Car it's not gonna work which is what I'm trying to fix.
I covered the Mic's to test it over Bluetooth and got Nuttin.
Grrrr.
Back to Cyberon which is the closest to working.
Fixed and works
See http://forum.xda-developers.com/showthread.php?p=35954424#post35954424
Did you try AVX (Android Voice Xtreme)? Works very well....
mswlogo said:
Never mind Dragon is "Broken" over Bluetooth too.
It doesn't actually switch to the Headset MIC.
It has amazing recognition and still a very nice app.
But if the phone is in my pocket in the Car it's not gonna work which is what I'm trying to fix.
I covered the Mic's to test it over Bluetooth and got Nuttin.
Grrrr.
Back to Cyberon which is the closest to working.
Click to expand...
Click to collapse
lostsoul77 said:
Did you try AVX (Android Voice Xtreme)? Works very well....
Click to expand...
Click to collapse
Yes, are you using it on a Bluetooth Headset?
Quick question what is the issue? I am on MeanBean 1.3 and I have no issues with my bluetooth headset(s) or my car radio.
copc said:
Quick question what is the issue? I am on MeanBean 1.3 and I have no issues with my bluetooth headset(s) or my car radio.
Click to expand...
Click to collapse
Read the Google Bug in the OP.
Also read a post I made a few replies up to a work around to get Cyberon to work even better.
Bluetooth VOICE dial over headset cannot find contacts.
Cars do their own voice regonition to their own uploaded contacts.
Once a call is established the Bluetooth headset works fine. Or if a call comes in.
The Handset Voice Dial also works fine.
It's broken on all phones that are on 4.1.X JB. It's said to be fixed in 4.2.X
You can fool yourself into thinking that it works if say you only call your Favorites (because I think it prioritizes those).
It will also work if I Clear Caches for a few minutes. It's like it builds a bogus regonition cache for the headset.
If you only have a dozen contacts it might work.
I have 400 Contacts. It can find my wife every time, but not a single other contact works.
ICS Google Search worked fine.
There are almost 200 replies to the bug on Google all kinds of devices.
It was also broken on ICS ROMs that added Google Now from JB 4.1.