I Upgrade my O2 XDA II firm ware from ROM vesion 1.60.50WWE to 1.7.2.00 T-Mobile.
When upgrading to radio about 51% then has got a Error message ID 104 or 144 (I don't remember exacly) and guide include 4 step, summary access bootloader and reinstall.
I have reupgraded but received the same error.
after that I have downgraded the ROM vesion 1.60.50WWE but received the same error too.
Nowaday, My O2 can not start and I cann't doing any thing.
Help me.
Thank.
can you still get the boot loader screen or it's completely dead ?
If you still can, try flashing another ROM but after modifying the country code
Nowaday My O22 have been working, but I only use it with PDA function, no Telephone. Because process upgrade ware not completed. I was access boot loader and try reupgrade ROM with only radio stack many time, but any time upgrade when proccess write radio stack about 50% then Error. Although proccess erase radio no problem. I was try many other version ROM but the same error. If reboot O2, I must wait 20 minute It can working.
If enter Device Information:
ROM version: 1.72.00WWE
ROM date: 03/15/04
Radio version:
Protocol version:
ExtROM version:1.72.04
The boot loader version is 1.01
May have problem with hardware ?
Can have replace Flash ROM- Radio stack?
Thank You.
maybe it can work if you change your boot loader to 1.06
but now I haven't upgrade bootloader any time.
Can you help me how to change bootloader?
Thank!
Related
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
Guys
I just got my TyTN (unlocked, stock TyTN, HERM200, HT636 series) yesterday. Device info as follows:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.255.106
I am on Cingular and in the Washington DC area.
I was trying to flash the Radio only to 1.16 because I am having issues connecting to the Cingular UMTS network, as per the wiki site (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms). Here's what happened:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error:
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
Click Exit to quit
(attached screenshot)
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Thankfully, the device started working properly after starting up.
Any thoughts regarding what's going on? Why was I not able to update my Radio?
I will really appreciate any help in this regards.
JoKer
tried to run the upgrade twice when you get the error? without disconnecting the device from usb...
No pof ... I haven't .. I disconnected it before restarting it. What exactly should I do this time?
gravejoker said:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error: ERROR 120: COUNTRY ID ERROR
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Click to expand...
Click to collapse
Everything ok until "d", don't do "e". Go to "a" again.
I followed all of above steps with my stock TyTN. Fired up the upgrade again after the country ID error, I get the white screen indicating a radio upgrade is being performed. After a while I get the 114 error, I reset the TyTN but the radio is still 1.03. Anything else I need to consider?
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
pof said:
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
Click to expand...
Click to collapse
Ok, I have 1.06 bootloader. I was interested in a newer radio ROM to figure out whether my old ROM prevents me from having a simultaneous voice/data connection...
Any suggestions what to do next?
Flash a ROM matching your CID with bootloader 1.04.
Read this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
I got this phone from Belgium and I want to flash it with polish OS file. I do 'CID & SIM' unlocking procedure, but it crashed when program want to upload special radio image to phone. Phone runned only in bootloader mode, I flashed OS and it powered on normally. But it has no service, in infos i can see: no radio version and no IMEI. I tried to flash radio on boot 2.10, i also downgraded boot to 1.04 - no result.I yried a lot of radio version. Radio updater freezes on 0%, and i must write again OS to make phone alive. is there any possibility to write radio (for example using MMTY) ?
Sorry for mt bad English,
BR
Evening guys,
I have been reading a lot of threads regarding the Mozart and more particularly SPL 4.6 because I want to flash Deepshining.
I am now more confused than anything. NoDo flash/Y Cable...
So here is my phone build:
carrier orange uk
7.10.7740.16 soft
2250.21.40600.061 firmware
0004 hardware revision
5.69.09.05a radio software
A.102.0.D4 radio hradware
4.6.2250.0 boot loader
4.06.061.00 rom version
spl-4.6.2250.0 (129193) MNG
PD67100
And my question is can I flash a Nodo to downgrade the spl.
(RUU_Mozart_Orange_UK_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar)
Also is normal if when I run the rom update utility the "from version" field is blank
I hope you can help.
Thanks!
now have 1.22 but rspl not loading
Hi Finally tried and now have spl 1.22
I lashed this rom
RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_22.24.50.09U_by_ansar
but now I can't manage to load rspl. The phone does not reboot automatically.
If you have any ideas...
Thanks
I sorted it!
I flash again using a different rom to get a different spl.
I then was able to load rspl.
I now have Deepshining
Hi can you give me brief details of exactly what you did please as i would like to do the same with my orange branded phone please.
regards
solution
Yep mate no problem
I first flashed my phone with a nodo rom
download and launch the exe shutdown your phone restart and hold “Volume Down” button during reset to enter OSPL mode....
located in this thread: http://forum.xda-developers.com/showthread.php?t=915827
in the middle of the page ou get this link from ansar
http://rapidshare.com/files/454244797/RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U_by_ansar.zip
I fisrt tried version 1.22 but for some reason it would not allow the next step which is loading rspl and hspl the thread with the tools and tutorial is here:
http://forum.xda-developers.com/showthread.php?t=1195647
Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
you first launch rspl it then restart the phone and you can load hspl. your boot should change to hspl 1.24....
with hspl you can now flash with any custom rom / unbranded rom.
Don't hesitate to ask me more If any doubt. You don't want to end up with a brick
\m/
question
one thing what is your bootloader version/spl version
as mine was 4.6.2250.0
the way of doing differs depending on that
If it is 4.x you can do like me I am not sure about 5.x and above anymore
thank you very much for the guide....very much appreciated. i hope now that i can load a custom ROM on my fone without bricking it!!
Details of my fone are:
OS vs:7.10.7740.16
Firmware rs: 2250.21.40600.061
Hardware rs:0004
Radio sfware:5.69.09.05A_22.50.50.21U
Radio hdware: a.102.0.d4
Boot lder: 4.6.2250.0
i'll download the bits now and give it a go 2moro.
many thanks
Thankyou very much for the guide....I now have a custom rom installed on my fone with the tango update. Cant believe how easy it was....when you know how that is!
Thanks again much appreciated. and if anyone else asks the question in the future i'll gladdly point them to this post.
regards
Orange Unbrand Help
Hi Guys,
I'm trying to un-brand and custom flash my ROM so to release the tethering feature on the Mozart 7. I'm pretty new to flashing WP7 handsets so would really appreciate your advice and guidance.
Details:
(across red banner it reads Security Unlocked)
PD67100 SS-BC (4K)
SPL-4.6.2250.0
TOUCH C1(v66)
OS Version: 7.10.7720.68
Firmware Number: 2250.21.40600.061
I'm currently downloading the following ROM following your instructions above;
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U_by_ansar.zip
Once this has completed I guess i run the update utility in the zip to flash the Mozart and run through the DFT HSPL RSPL WP7F3 tutorial you mentioned above however I'm confused on the next steps as I then want to update to Mango so do I need to re-flash with a custom ROM (unbranded) to will enable tethering, do you guys have any recommendations?
I downloaded this RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE however I'm not sure if this is right!!
worried I might brick my phone
i really need urs help im into trouble i had brick my cell now i cant unbrick my mozart wp7 see what i did
i use spl rspl hspl by dft and i use rspl to ospl 1st i had orignal botloader version 1.23 and now i got 1.32 i was using deepshine 2.0 after thet i successfully flash rom i went back to install a new rom its stuck on bootloader rom and sometime HTC logo in green color and vibrate few time no more windows just give me suggestion waiting for urs kind respnce
Regards
Mohsin Raza
Your Bootloader shows "HSPL1.32xxxx" in the first and "CotullaHSPLxxxxx" in the second Raw?
Then you can flash a Custom ROM .
If you has restored the "OSPL"back, then you only can flash Stock ROMS from your Provider.
Make a Hard reset first .
ok here is what i try alrady
i press power+vol up+down for a hard reset and press andykey to reset and 1st i install RSPL i have 1.23 bot loader then after installing rom successfull i got 1.32 what that mean after that i cant install any other rom and my firmwere has been bricked its stucked on HTC logo few imes vibrate
Again: You have HSPL or not ?
yes i have but no luck i guess i need to repair my spl downgrade back to 1.23 orignal spl but how? right now i have 1.32 i did everything
The HSPL Bootloader is 1.32 !
If you want to get back to original Bootloader you can restore it with the same Tool , only select "OSPL" before.
After that you can flash you Stock ROM from your Provider.
After this , you have the actual SPL from Stock ROM on your Phone ...
soory for a late responce but i did that alrady no luck now i had sent my htc to care center for unbrick and install a official rom...after that i will not stop doing exparement on my mozart but i will be careful next time thanx for urs advice thanx
Regards,
Mohsin raza
will you please PM me for how to get official ROM for my phone
OS version:7.10.8783.12
Firmware revision number: 2250.21.51303.401
Hardware revision number: 0004
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.13.2250.3(135167)
Chip SOC version: 2.2.5.0