I have had my xda 2 for 3 weeks and last night tried to update the rom, turns out i was updating and older version not my xda doesnt work and just says SERIAL V1.06, please help me what do i do to get it working again ?????
Firestarter2 said:
I have had my xda 2 for 3 weeks and last night tried to update the rom, turns out i was updating and older version not my xda doesnt work and just says SERIAL V1.06, please help me what do i do to get it working again ?????
Click to expand...
Click to collapse
A little SEARCH before posting wouldn't hurt
However:
1. Download LATEST software pack for your model, I am assuming it's O2 UK
2. Go to your ActiveSync on your PC and disable USB connection in settings
3. Plug XDA2 with SERIAL 1.06 screen on it to the cradle
4. Run upgrade again. It should be OK now.
Good luck.
P.S
MAKE SURE THAT IT PLUGGED DIRECTLY TO USB PORT ON PC, NOT USB HUB.
MAKE SURE THAT IT GETS POWER FROM THE POWER SUPPLY
Thanks for your reply, do you or does anyone else know where i can get the 1.66 rom from for my XDA 2 on O2 UK?
:roll:
http://www.my-xda.com/downloads/xda2_upgrade_download.html
Why not straight upgrade to 1.72WWE??? its faster and has a better bluetooth stack than the older version. But the bad thing is that it cannot be downgraded...
Related
I seem to have a problem with my XDA II (Dopod 696). The device won't sync via USB, but it will sync via infrared. When i plug the USB cradle/cable in, the computer complains that "USB Device not Recognized" saying that one of the USB devices attached to this computer has malfunctioned, etc..
Now the problem is, this phone comes in Chinese software. If i have to active sync via BT normally it would be fine, but i need USB support to reflash in WWE ROM to the phone.
Or has someone come out with a total solution for flashing the phone via SD card already? I have tried the ROM 1.72 bootloader but it does not work at all. My bootloader is 1.02.
THe strange thing about this all is that when loaded into bootloader mode, the phone says Serial. When i plug in the cradle/cable, the phone can recognize the connection and it changes to USB. But it is still detected as a malfunctioning device on all 4 of my computers (WinXP x2 Win2k x2).
Help, somebody!
can't you put it in bootloader usb and then run an upgrade ?
M4io said:
can't you put it in bootloader usb and then run an upgrade ?
Click to expand...
Click to collapse
no..what kind of an upgrade would run on a undetected USB connection?
Even mttyl won't work.
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Anonymous said:
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Click to expand...
Click to collapse
Solved the problem..
Believe it or not, the connector on the bottom of the XDA II had actually had 4 pins twisted down...in particular the USBDATA+ and - pins clamped to ground (i think) thank goodness the device still works.
Managed to restore them to the original position with a blade, tweezers and a very nervous 20 minutes.
Have no idea what a replacement connector would have cost locally here. Probably another bomb (or as the "generic" solution goes.. Err, sir.. We need to replace your motherboard RUBBISH!
can anyone help me with please i was trying to upgrade to wm2005 but could not get the nk.nbf files then i noticed my xda said usb v1.01 when i took it out of the charger it said serial v1.01 i have tried hard reseting and sorft reseting, i have even let the battery completely die but still it just say's serial on the screen or usb when put in the charger
For starters, you need to do lots of reading. There is no wm 2005 for the xdaIIi.
Download the original ROM from the 02 website for xdaIIi
You will be fine after this
i was under the impression that windows mobile 5.0 (magneto) was for the xda IIi
http://www.my-xda.com/downloads/Xda_IIi_LaunchROM_v1.10.124.exe
I didn't complete the procedure, but it seemed possible to install WM5 on my XDA 2i. It was put in bootlooder mode, I run the install program without modifying anything and the ROM appeared to be ok. So I assumed it would work, but like I said, I didn't complete the procedure on this phone as I didn't wanted to reinstall my software, plus some of the popular software like Pocket Informant 2005 or Agenda Fusion 7 would not install on it. I found that out earlier, when I sucessfully installed WM5 on a friends XDA 2 - not the i model
i have downloaded xda_IIi_launchRom_v1.10.124 but how do i install it i can't get my xda to connect to my laptop via activesync 4
You have to put the XDA into bootloader mode, then cradle it in start the upgrade.
Cheers
Pat
hey everyone, not posted on this forum in a long time, anyway im stuck trying to root my g2, i have been following this guide
forum.xda-developers.com/showthread.php?t=645253
and im on the very final step of the goldcard downgrade, i run the image and my phone goes into a bootloader and then i get an error message saying, Usb connection error 171.
Any ideas how i can get round this?
Thanks
Shotgunfool
i suspect you're missing some usb drivers, have you got htc sync installed?
USB Debugging on?
both are on, but problem is now solved, i decided before going to sleep i would try it with my 7 year old laptop, just to see if it would work, God dammit it did..
after 3 hours of pulling my hair out using my 2 month old pc and just leasurly put it into my old laptop it downgrades as if i said whats 1+1?
currently downloading villain 5.2 rom
looks to me as the chipset of your usb's is not compatable i had same problem with a pci usb card but on board usb worked fine so i put it down to the chip set
Sent from my aHero using the XDA mobile application powered by Tapatalk
Any mod/admin please feel free to close this thread, issue has been sorted
now running the lovely villain 5.2 rom
hi i m newbee here . my phone is unrooted . Since last three days it is hanging and turend off by itself. when restart battery finishes . its running gingerbread ., i did factory reset but nothing worked . when i connect it with usb or pc it doesnt connect and it shows that its not connected. somebody told me to reinstall the software . how can i do this or fix this problem. thanks
More info plz. U need the drivers for the phone. Installing kies is the easy way to get them. Then again not everyone likes kies.
Sent from my Nexus 7 using Tapatalk 2
Need to be more specific what gb version are u on what rom did u have before all this happened what root method did you use excetera............
Sent from my SAMSUNG-SGH-I777 using xda premium
problem description
i m new to android , i dont know whats root is ? my phone is not rooted. few days back its start s hanging and when i received call it hanged then i had to restart the phone . then instead of shutdown its started restart that was annoying . then i connect my phone with USB cable to connect with Pc Samsung kies but it said Device is not found or Driver not found . its charges when i connect to the pc but USB is not detecting it. i wanted to update it to ICS through Kies but its not connecting . Android version is 2.3.6 . Build no GINGERBREAD.UCKK6. kindly ask me if more info is needed.
ixiabixi said:
i m new to android , i dont know whats root is ? my phone is not rooted. few days back its start s hanging and when i received call it hanged then i had to restart the phone . then instead of shutdown its started restart that was annoying . then i connect my phone with USB cable to connect with Pc Samsung kies but it said Device is not found or Driver not found . its charges when i connect to the pc but USB is not detecting it. i wanted to update it to ICS through Kies but its not connecting . Android version is 2.3.6 . Build no GINGERBREAD.UCKK6. kindly ask me if more info is needed.
Click to expand...
Click to collapse
So wait, you don't know what root is?
(⊙＿⊙)
Apparently this phone is the SGH-1777... We've had it wrong this whole time!
Have you tried searching these forums and the official AT&T forums? They might have more info you can use since your phone is stock. That or call their Tech Support.
Good luck!
Clay
Sent from my PINK GS2 using xda app
You need to try reinstalling the drivers for the phone.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Like Phalanx7621 suggested, install/re-install drivers and Kies. If you do have Kies installed on your system, remove it. Then go to Samsung's website, download the latest version, and install into your system. That should take care of your computer not recognized your phone problem. For the random restart problem, it may be a defective battery.
HTH.
ixiabixi said:
i m new to android , i dont know whats root is ? my phone is not rooted. few days back its start s hanging and when i received call it hanged then i had to restart the phone . then instead of shutdown its started restart that was annoying . then i connect my phone with USB cable to connect with Pc Samsung kies but it said Device is not found or Driver not found . its charges when i connect to the pc but USB is not detecting it. i wanted to update it to ICS through Kies but its not connecting . Android version is 2.3.6 . Build no GINGERBREAD.UCKK6. kindly ask me if more info is needed.
Click to expand...
Click to collapse
Make sure you start Kies before you plug the USB to the phone
Call your carrier because if you haven't made any modifications like most of us do then maybe its a problem for them and they might be able to fix it for cheap or get you a new phone since this doesn't sound like its your fault.
Sent from my GT-I9100 using xda app-developers app
Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.