I have the tmobile pocket pc 2003 but when i connect it to my pc it doesn't detect it... i don't know wat to do... i need it to connect so i can unlock it.. well any advice will help....
Related
Had this given to me
i have no charger but ive managed to get it working with an electrical adptor.
I have the usb cradel and the unit itself.
Its locked to O2
What software do i need. so i can A connect it to my PC (comming up as unrecognised usb device in xp)
What software do i need to unlock it? from what i can gather its running pocket Pc 2002.
Thanks in advance
Matt
I dont have an O2 sim card so i cant get it to work with orange or voda it just asks for a code. If anybody has any suggestions if would help.
Ive looked around the site and its confuesed me even more!!!
for unlocking :
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
For connecting to your PC I guess you need ActiveSync
http://www.microsoft.com/windowsmobile/downloads/activesync37.mspx
Hope you have been given it legally :evil: wish somebody would give one to me
Thank you very much!
Your a star!
Also does anybody know how to set up internet on it on ORANGE or Vodafone so I can access my emails?
do a search for something like "gprs orange vodaphone"
people have written those info many many times
ok ive got all the info i just dont know where or how to put it in t the device!?
help would be appreciated
i have a o2 xda II but it is a asian version. I try to download Helmi's WM5 an update my o2 from wm2003se to wm5 .. but i enter the bootloader mode .its version is v.102 .. it reads usb when it is in the cradle but i still get connectino error.
my usb is powered.. not connected to a hub
please help me...
thankyou
is it vista?
this search gave
http://www.google.com/search?hl=en&q=ERROR+101:Connection+&btnG=Search
http://forum.xda-developers.com/showthread.php?t=299620
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,26904,27060,quote=1
Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
tiagofa said:
Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
Click to expand...
Click to collapse
if u are in Bootloader mode the one in three color mode.. U can downgrade surely with PDA viet temp.
In Boot loader mode just reconnect your device to pc through USB . and launch the PDA VIET program..
It should be work.
doesn´t work..
is there any connection with SD slot card doesn´t work ?.. ?? :S
help.. :S
u r using vista right?
u should do that with xp
be sure that with xp u can fix it 100%
no, i+m using xp.. still doens´t work..
i think my prophet dies :S
try flashing NVID wm5 when in bootloader. if you were successfull flash HardSPL and after that you original ROM!
First, disable any firewall
Put the prophet in bootloader (3-clored screen) by pushing CAM button and punching the reset hole at the bottom. When you realease the stylus, the colors should appear.
Then, before connecting your prophet to the PC, first DISable the "Allow USB connection" option in the connectionsettings box of ActiveSync.
After that connect the bootloadermoded Prophet to your PC, it conects as an ordinairy USB device. Then run the RUU of your choice.
probably the better idea is to send a snapshot of your display in fault mode.
do that with a camera. it could be useful to identify the state of your error.
i'm not skilled but here you can find a pool of powerfull developers.
jork
problem solve
problem.. usb port lol :S
So i have a Swisscom branded HERM200 ROM-Version:1.20.166.4 with German language.
Is there any way to flash in English language? thx
Yes there is but before flashing i recromend that u SIM unlock ur phone and CID unlock it (use the search or WIKI on how to do that) and then upload ur TyTN with the latist HardSPL (RECROMENDED) if you dont you run a masive risk of bricking ur TyTN!!
Doing this will Void Ur Warenty (if u have one)
thx but this phone is already sim unlocked i like to do like here says :♦ http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=69&Itemid=26
is this tutorial OK?
thx
yes it is, but before you do that, do this first
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
ERROR UPDATE [260]
Hard-SPL-V7 using this file trying update my HERM200
any help now please?
error 260 is an open port error, try any of the following:
reset your phone
reset you pc
change usb ports
turn off firewalls or antivirus software
Hello everybody out there,
I updated the ROM of my O2 Xda II but I think the update did not materialize and in fact my PDA would not open. My PDA shows Serial at the top and v 1.06 below. When I put it in the cradle, it displays usb at the top and v 1.06 below. Can someone help me what to do to boot my pda in windows? Thanks.
U a in bootloader, at this point u can upgrade ur ROM if u want to go to window u may need to press restart button..............
gentleblueshark said:
U a in bootloader, at this point u can upgrade ur ROM if u want to go to window u may need to press restart button..............
Click to expand...
Click to collapse
Thks.
How can I reprogram my O2 Xda II to operate in windows mobile?
Sorry, can u explain again about what u need?
If u want to upgrade ur ROM, first u need enter bootloader then double click on HimalayUpgrade.exe after ROM Upgrade complete u will not see bootloader anymore until u enter bootloader.
gentleblueshark said:
Sorry, can u explain again about what u need?
If u want to upgrade ur ROM, first u need enter bootloader then double click on HimalayUpgrade.exe after ROM Upgrade complete u will not see bootloader anymore until u enter bootloader.
Click to expand...
Click to collapse
As of now my Xda II would not boot on the usual windows mobile operating system, all i can see now is a word serial on top and 1.06 below the screen. I do not know what to do and install to make my PDA return to its normal programs. maybe this is due to the failed software upgrade. What would I do and what should i install and where can i download it free? Thanks so much for your help. By d way I'm using vista so i think i would sync using windows mobile device center of the vista program.
Yeah may be u need Mobile Centere for vista. ur issue it seems to be need to re-install ROM. ROM u can search here that is compatible with ur PDA....
O2 Xda II Upgrade
I put my O2 Xda II on the cradle to upgrade it. My O2 Xda II is in bootloader mode
with usb written at the top. I run the HimaUpgradeUt.exe rom. It can't detect my O2 Xda II in the cradle. Can somebody help me please.
Still Undisolve?
You can eject the USB cabble and plug it in again and try to run the wizard
You have to install Microsoft ActiveSyn (4.5 final version for Windows XP) or Windows Mobile Device Center (Vista only) before for the USB can be detectable or reinstall it again
Ensure that you plug the USB cab directly into your PC not to a bridge
Good luck !
You can upgrade to WM6.1 for the latest ROM !
HOW CAN I USE bootloader IN MY PPC ???
if you are using Vista then change to a XP computer and do the ROM the way you did it the 1st time. I had the same problem with XDA Exec
help me..!!
hello all senior member..
i have same problem, when i put my XDA II on the cradle then run HimaUpgradenoId.exe after that showing 'error 101 fail connection'. whereas My PDA already shows USB at the top and v 1.06 below. Can someone help me what to do to boot my pda in windows Vista? Thanks.
Sammy - after many days of this same error, I decided to actually listen to the advice given earlier and use a laptop running XP, and NOT Vista.
I was able to then run HimaUpgradenoId.exe without getting any "failed connection" error messages that I had been getting with Vista.
Thank you so much. I did run on the same problem.
Going to try it out on a xp machine.
OMG all..If u could do a search in the google or the forum..there is a complete guide on Upgrading Via Windows Vista
See here for the Guide : http://buzzdev.net/read.php?64,29174
or Search RUU Upgrade in Vista
Yep it worked with XP.
And thank u Ather