I tried to upgrade my Device but When i install new update after two next Give me Error message said " Error 120:country id error" 5-5-N-8-N
and turn off my device and show only on to screen serial and on bottom Ver 1.06
PLS Help me
Country code errors =>
http://forum.xda-developers.com/viewtopic.php?t=12101&start=0
unfortenately you are now in a position that you can't see what your device was.
Do you remember what OS was on your device? Which update did you try?
i have vodafone PDA1605. i try to update with orignal htc tytn windows 6 rom after one % it says inviled verder id & device restart. after restart after displaying vodafone logo & windows logo screen goes white. i try so many things after that. i try vodafone orignal rom (HER_VODA_1201616_1030600_UK_SHIP) when first start to update with this rom it displayed pocket pc rom ver. when i try next to update this ver with same ver(HER_VODA_1201616_1030600_UK_SHIP) error message displayed check your cable or pda (message no. 260) but when i try 2 update with Tytn win 6 rom. its woking but only one % & message displayed inviled vender id. i try to update spl & radio ver but displayed your image corrupt.
my device IPL-1.00
SPL-2.03
plz help me if some one know's ?
Hello.
I want to change another version rom on HTC Hermes but when start loading new rom the "ERROR [262]: UPDATE ERROR
The rom update utility has encountered communication errors during the update process ... RECOVERY ...."
Phone is correctly connected to USB and entered on bootloader.
ex. Old rom is Schap's and i want to change to RDZ-ROM-STORM (for example) but not works!
When load similar version (Schap's) works!
What could be the problem?
Sorry 4 my eng.
im trying to flash my rw6828 to wm6.5 but nothing happens after bootloader(flash through sd card).
my com shows a error saying the rom is not designed for my device.(flash through com).
i downloaded my roms from these threads:
http://forum.xda-developers.com/showthread.php?t=625874
http://forum.xda-developers.com/showthread.php?t=360664
unable to flash 3.27 rom on my htc hd2 ........its a t mobile product but unlocked as i use it in india so i tried to flash asia version but it start and completes only 8% thn nothing happens and gives error [262]:which says
UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode
Its goes to the tri color screen where it says upgrade ROM code error Please try again.
Plz help
in download mode it says:
PB81110 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
your device is CID locked which stops none t-mobile roms flashing.
First thing you MUST DO is check what version HD2 you have:
if it has green & red, call/end keys it is the t-mobile USA version (TMOUS) & flashing the wrong radio on that model will result in a bricked device.
if you have standard model with white icons on keys then you will need install HSPL prior to flashing the ROM update, HSPL will bypass CID fixing 262 error ...
HSPL & ROM links for all models including ROM direct download links for TMOUS HD2 can be found in HD2 wiki.
Go look & read it all & be sure you know what you doing before proceeding to flash ...
can u tell me how to unlock cid and can this screen tell me about the rom whether it is 512 or 1024.....
I see you have HSPL already.
are you flashing from computer or trying sd card flash ?
I would also assume it is 512 EU version from details above
try the latest HTC Generic WWE ROM from Wiki section & perhaps try HSPL4 to reflash HSPL as maybe corrupted nand issue. Also do flash from PC via USB cable & make sure PC has activesync or WMDC installed (all can be found in HD2 Wiki)
i m flashing it from my pc as my phone doesnt start when i switch on it stuck on screen saying SOFTWARE UPDATE FAILED PLZ TRY AGAIN......
i tried to flash HSPL4 but it gave me error http://prntscr.com/1stcv1 ......
n also i have WMDC but i doesnt show up my phone but in tri color screen mode it shows usb....
yes it hav 512 rom
Sounds like corrupted nand & model id is perhaps corrupted too.
Try resetting via reset button.
Have a look at these thread:
http://forum.xda-developers.com/showthread.php?t=1001452
http://forum.xda-developers.com/showthread.php?t=1182215&page=2
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
First get it fully working on a WM6.5 ROM & test it for 2 or 3 days, then if good look at the Android nand section & look for a Android build you like & has good feedback & current support.
Post 4 above has a link to an HD2 HTC generic WM6.5 ROM but you can choose something else if needed by looking at the ROM links in the HD2 Wiki
xdriver said:
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
Click to expand...
Click to collapse
Hello xdriver,
if you want Android on yor phone you mighr opt for installing via NativeSD method, giving you the advantage of trying out different builds and choosing the one that suits your needs at best. Also, if somwthing goes wrong you always have WM fully functional on NAND. But consider buying a decent SD card first, meaning one with exceptional good random r/w access speed. You'll find tutorials in the SD section.
Have fun!
Best regards
Getrid…
Sent from my HTC HD2 using xda app-developers app
thnx 4 the info frnds but after doing task29 thn also it stuck at 8% and give same error stated in post #1 and now my phone doesnt start up when i switch it on it vibrates for 3-4 secs n nothing happen after i tried to flash wwe asia india ROM ............... maybe it is battery problem now i charging it to check the prob...........
its getting into the bootloader mode now i m download a lower version of ROM .......Hope it works