Related
Hey all
Back when i was using Black Majik, when I was connected to a UMTS network, the wireless Home plugin would show 'UMTS T-Mobile'
however, now, with the Schaps 3.60a rom, it only shows T-mobile, and with TNT it only shows TMobile
Is there any way possible to get it to show UMTS?
with thanks
also, which radio rom do you all reccommend for T-Mobile UK?
Im assuming you are in a 3G zone? Is 3G disabled via the comm manager or via the registry?
i know exactly what you mean! This is what i think is causing a problem with the network name not being sent to my Parrot 3200LS car kit.
Would be very glad of an answer to this.
I too noticed this problem and just assumed that it was a display setting as i've still seen the carrier signal thing in the top bar turn to the U for UMTS.
There are a couple of settings in your registry that control this.
Take a look at:
HKLM/SOFTWARE/OEM/PhoneSetting
There are two values here that are of interest.
The first one is Enable3GLongName. This should be turned on (set to 1).
The second value is for LongNamePrefix
This can basically be anything you want. UMTS is a bit of a favourite, but you could call it whatever you like (Next G in Australia for instance - it would display 'Next G Telstra').
Jasjamming's ROMs have these settings set by default whereas Schap's do not - thus the reason for the change to your operator display.
if that works mate you are an absolute hero!!! Just trying it now.
You are indeed a complete and total Hero! This worked for me, although Enable3GLongName was already enabled, changing the prefix from 3G to UMTS was the part that worked for me!
Now my parrot says UMTS T-Mobile again!! I really cant thank you enough mate!!
Cheers mate - glad I could help
*deleted my post*
can this be lobbed into the wiki?! i'm not sure how to edit it, but if someone else is then great, otherwise i'll try and figure it out over the weekend!
Since I upped my radio to 1.4 I have had a problem with my WiFi not enabling. I am using ROMS cooked up in DCD's Kitchen 1.6.9 and 1.6.10 and am using the 10 Button Kaiser style CommManager. When I turn WiFi on it turns back off within a second or two. I am having the same problem in either ROM and I just re-flashed the Stock 2.09 Verizon ROM back in and although there is no WiFi button on the CommManager the WiFi status is saying off when I look at the advanced tab of the Wireless LAN settings.
I am reasonably sure this started when I went to Radio 1.4 as WiFi used to work for me. I have also gone up to and back down from the 2.13 radio and that does not seem to affect the issue. This confuses me because I read other threads where folks talk about WiFi in both of these radio versions.
Has anyone else seen symptoms such as this?
Thanks,
Ks.
have u tried soft set or hard set or updating the radio ?
Yep, the only radio I have not tried is 1.47 but others aparently have WiFi working with 1.4 and 2.13. I am thinking there must be something else, perhaps in the extROM, that is causing me problems since this problem seems to transcend Kitchen versions and the stadard VZW ROM.
Thanks,
Ks.
No prob.....
Are you sure the WiFi slide switch on the side is turned on? I am not able to ever use a software switch to enable/disable WiFi
whbell said:
Are you sure the WiFi slide switch on the side is turned on? I am not able to ever use a software switch to enable/disable WiFi
Click to expand...
Click to collapse
Oh boy
Thank you for pointing out the obvious to me and the symptoms certainly fit that diagnosis. As an ex-6700 user I absolutely forgot about that dang switch. All is working again.
I hate doing stupid things.
Ks.
I learn from experience like everyone. I came from the i730 and I still catch myself using a PhoneAlarm button on the today screen.
I'm not sure if I flashed the rom correctly, but I'm confident I did. Thing is I was able to reprogram my phone's MDN, MSID so the voice part of the phone works. But now I'm trying to surf the web, it dials #777 normally, shows that I'm connected and even shows the Ev icon, but I just can't load any kind of website. I'm using DCD's new rom that's compatible with the new radio. Anyone else having this kind of problem? I called up sprint and they told me to "Get Settings" for my Internet through my services tab, but this rom doesn't have the Internet service option available . So has any sprint user found a way around this or do I just need to wait for a new rom?
Click to expand...
Click to collapse
[Edit]
Silly me, it seems like I loaded an Alltel rom instead of the Sprint rom. Well I flash the sprint rom from dcd instead and now got the Internet option within my Services tab. Hit Start IOTA and viola! my powervision is working again! Now to play with the new GPS...
get settings
i think what they meant was go to settings, personal, phone. then in the phone settings, go to the Services tab, then highlight Internet. click the Get Settings button underneath that window, and then click Start. it should inform you its starting an IOTA, then give it a minute or two. it will show IOTA on the taskbar at the top to the left of the EV icon. if that completes ok, try loading a page then.
Mine has all the correct info in the phone and always goes to dial up... I have to revert back to the HTC's default rom for everything to work.
I'm trying to figure out the same problem. When I push the Start button to try to initiate the IOTA, nothing happens. I don't get any IOTA icon in the title bar at all. I've posted about it on PPCGeeks too, but still no answers.
justpctech said:
i think what they meant was go to settings, personal, phone. then in the phone settings, go to the Services tab, then highlight Internet. click the Get Settings button underneath that window, and then click Start. it should inform you its starting an IOTA, then give it a minute or two. it will show IOTA on the taskbar at the top to the left of the EV icon. if that completes ok, try loading a page then.
Click to expand...
Click to collapse
I meant, I don't even get the Internet option in my services tab with the rom I'm using. Therefor no IOTA for me.
Mine is halfway working. It only gets up to 1x speed. Intially would say EV but once I'm connected it drops to 1x. Now even when I go back to 2.16 I can't get EVDO anymore. Used to work. Not sure what happened. Maybe just a concidence my phone happen to break at the same time.
hi guys,
so far i've tried with DCD custom rom 2.0 and radio 3.27 and also with the leaked sprint version and i cannot get the GPS to work " i'm a Sprint User". i've tried in different spots in NYC: Bronx and Manhattan and GPS doest work at all. REV A is great i got 1.2 D/L and 450 U/L. is there anything else that i should be looking at beside phone settings--> locations settings?
thanks in advanced guys and DCD thanks for the custom roms, you're awesome!!
EDIT: am i the only one who's GPS feature is not working??
torankusu said:
hi guys,
so far i've tried with DCD custom rom 2.0 and radio 3.27 and also with the leaked sprint version and i cannot get the GPS to work " i'm a Sprint User". i've tried in different spots in NYC: Bronx and Manhattan and GPS doest work at all. REV A is great i got 1.2 D/L and 450 U/L. is there anything else that i should be looking at beside phone settings--> locations settings?
thanks in advanced guys and DCD thanks for the custom roms, you're awesome!!
EDIT: am i the only one who's GPS feature is not working??
Click to expand...
Click to collapse
Take a stroll in Central park with nothing blocking signal and try it.
-D
Dravor said:
Take a stroll in Central park with nothing blocking signal and try it.
-D
Click to expand...
Click to collapse
LOL that's a good one but i've already tried it from the roof of a 52 floors building in downtown manhattan. and nothing if i tried to use the sprint telenav it tells me that the GPS signal is to low, to make sure is turned on by going to phone settings-->location settings-->Network-->GPS, that location doesnt exist on my phone. any suggestions.
Freezing cold up in there by the way!!!
I live in NYC too and was having this problem also....just put the phone in ur window with Google maps running...it took about 45mins before it calibrated and found a satellite the first time. But now it works very fast.
Also make sure under system ---> external GPS you have "GPS Program port" on Com4
Hax0rpunk said:
I live in NYC too and was having this problem also....just put the phone in ur window with Google maps running...it took about 45mins before it calibrated and found a satellite the first time. But now it works very fast.
Also make sure under system ---> external GPS you have "GPS Program port" on Com4
Click to expand...
Click to collapse
i've done that, first time i left it over night, and nothing happened and every setting should be as it is suppose to. but again i'll try it, thanks
try this
i live in nyc and it didnt work until i went into settings and turned off my location then it found me in like 2 seconds
I'm in NYC as well.. Chelsea area.
My XV6800 had the location setting (Start > Settings > Personal > Phone > Services > Location Setting) turned to 911 Only. I set it to Location On and GPSViewer started seeing satellites but could not get a fix. I performed a hard reset (Start > Settings > System > Clear Storage ) on the device and it got a fix in 35 seconds. Now I get a fix immediately.
w00t! Time to try GPSGate to see if it will let me use Garmin Mobile XT
jrebeiro said:
I'm in NYC as well.. Chelsea area.
My XV6800 had the location setting (Start > Settings > Personal > Phone > Services > Location Setting) turned to 911 Only. I set it to Location On and GPSViewer started seeing satellites but could not get a fix. I performed a hard reset (Start > Settings > System > Clear Storage ) on the device and it got a fix in 35 seconds. Now I get a fix immediately.
w00t! Time to try GPSGate to see if it will let me use Garmin Mobile XT
Click to expand...
Click to collapse
the funny thing is that i hear people claiming that they have a 911 only option under location settings, i only have ON or OFF. anyways nothing is working i left it like for an hour almost drain out my battery. i havent got this GPS feature to work. any registry or someplace else to look for??
You need to download gpsinfo.exe, and run it, opening com4 at 9600. See if it shows you moving gps nmea data. If so, it's working, leave it be for awhile to get a fix. If not, you have a problem with your rom/phone/settings...
Shadowmite said:
You need to download gpsinfo.exe, and run it, opening com4 at 9600. See if it shows you moving gps nmea data. If so, it's working, leave it be for awhile to get a fix. If not, you have a problem with your rom/phone/settings...
Click to expand...
Click to collapse
sounds like it is probably my hardware because i've tried with DCDs and unofficial Sprint rom also. i'll give a try with gpsinfo.exe with location settings on and off just in case. thanks guys, i'll post back with results.
Check out the GPS FAQ I'm working on for some solutions:
http://forum.ppcgeeks.com/showthread.php?t=17032
torankusu said:
sounds like it is probably my hardware because i've tried with DCDs and unofficial Sprint rom also. i'll give a try with gpsinfo.exe with location settings on and off just in case. thanks guys, i'll post back with results.
Click to expand...
Click to collapse
Using GPSINFO.exe it shows me some red dots with numbers inside. that is when you start gpsinfo.exe and go to GPS INFO Tab. so what that means??
edit:it showed me some greens a couple of times.
alright so i installed gpsinfo.exe and the hardware itself seems to be working because it gives me red and green dots, but it doesnt seem to attach ot get a fix one, any suggestions?
So in the setup tab does it scroll data? if so your hardware is fine, leave it sit in a good area outdoors (or somewhere with a un-obstructed view of the sky) for about 10 minutes. It should get a fix (some of the circles in the other tab will turn blue). What are the signal levels you are getting in that tab?
Shadowmite said:
So in the setup tab does it scroll data? if so your hardware is fine, leave it sit in a good area outdoors (or somewhere with a un-obstructed view of the sky) for about 10 minutes. It should get a fix (some of the circles in the other tab will turn blue). What are the signal levels you are getting in that tab?
Click to expand...
Click to collapse
ok... the setup tab does scroll data, then the gpsinfo tab shows me red and green dots with numbers inside the dots. also with bars that range from 13 to 33. 33 being the max i've seen but doesnt get a fix status.
GPS stopped locking altogether
Anybody elses GPS just stop working? Haven't been able to get any locks since yesterday even when out driving around. Only known change yesterday was installing HTC Home Plug and Customizer 0.8. Tried soft reset, manual IOTA, ##debug# and googlemaps. All no help. Any clues?
torankusu said:
ok... the setup tab does scroll data, then the gpsinfo tab shows me red and green dots with numbers inside the dots. also with bars that range from 13 to 33. 33 being the max i've seen but doesnt get a fix status.
Click to expand...
Click to collapse
alright guy so just a little update, my GPS works fine but it takes like 20 to 30 minutes every time i close googlemaps or any other program that uses the GPS hardware, i have to prime it using gpsinfo.exe first like for 30 minutes and then will work.
Thanks to all you guys who helped me in this.
Hi Mods!
I really sorry that I have to open new thread, because I and some others also posted here
http://forum.xda-developers.com/showthread.php?t=405016&page=4
but it seems that no one can solve that problem correctly. And MODs seems that don't know about that problem.
So, could MODs give us some ideas and solutions.
For example: I used Original ROM, GPS with TT7 was OK.
But when I change to another ROM (any other ROM), it was so good that everything works well but not GPS.
Hope to hear from u soon.
Thank you.
vqscorpions said:
Hi Mods!
I really sorry that I have to open new thread, because I and some others also posted here
http://forum.xda-developers.com/showthread.php?t=405016&page=4
but it seems that no one can solve that problem correctly. And MODs seems that don't know about that problem.
So, could MODs give us some ideas and solutions.
For example: I used Original ROM, GPS with TT7 was OK.
But when I change to another ROM (any other ROM), it was so good that everything works well but not GPS.
Hope to hear from u soon.
Thank you.
Click to expand...
Click to collapse
You do know about the problem with validating maps for a new installation of TT7 ?
Do a google for this in xda -devs.
i used this TT7 on Kaiser and it worked like a champ.
and from your instruction, I also sink to another sea that the need information is somewhere but could not find out.
could u pls give me a better ideas. pls don't tell me that: google something in somewhere.
I spent so much time to discuss and post somewhere else.
thanks
Clarify.
Please explain the type of gps problems your having, Problems with getting fixes? Problems with tomtom?
I need yr help
thanks friend
My problem is here.
When I bought x7501, I installed TT7.45 with Map of North America. It work fast and better than Kaiser I had.
Then I tried to Up ROM to SPL 3.5 (every ROM for 3.5) and I could not use GPS. TT7 work but it only show the working screen with: Waiting for valid GPS signal... forever. And when I find the GPS position, it says: Poor signal.
I tried to change Radio version but failed.
I also tried to convert back to SPL 1.2 now and working with Official ROM 6.0 (but with SPL 1.2 Oliprof). I tried to change Radio version, from 1.47 to 1.57 to 1.58 but failed. So strange (because I had to format the drive when I convert back from SPL 3.5 to SPL 1.2 so I lost my backup file for SPL 1.2 for original ROM).
Now I can not receive GPS signal.
I also try to install GPS Proxy,but this program doesnt run in my Athena, it says: Negative exception and quit.
I aslo try to change th port for GPS to another COM port, but it will not turn on GPS device.
In my Athena, the default COM port for GPS is COM4.
So, that's my problem.
Could you help me with detail instruction.
So thanks and wait for your help
try
you can try going to
settings/system/external gps/
*
software port com 4,hardware leave it at none,set baud 9600,manage gps automatically checked
*
import attached reg file on device
*
install attached visual gps
*
run quickgps ,download updated empheris file
*
soft reset device
*
load visualgps, click agree,click edit,settings,set port to com4,baud 9600,click ok
*
hold device by window or go outside
*
Wait for grey signal bars to go blue then your set
*
load up ttn,click where u see signal bars in lower right,then agn on right above version number,configure gps to use other nmea,set com port 4,baud 9600
*
it should instantly have fix!
thanks friend
i hope it will work
i try it now then tell u later
but do u mean that it works for AP 4 only? or another rom?
What Radio do you have installed
i am confused because your sig says you have radio 1.57 but you say in your post above that you couldn't upgrade from radio 1.47.
AP4 needs at least radio 1.50 according to here http://www.htc-hackers.com/uploads/AP4_How_To_1.8.pdf
vqscorpions said:
thanks friend
i hope it will work
i try it now then tell u later
but do u mean that it works for AP 4 only? or another rom?
Click to expand...
Click to collapse
Steps are optimal for michy roms,ap4 gps should be blistering fast "out the box"! When I used ap4 I was using radio 1.57,and even indoors I had gps fixes in 30 secs after soft resetting.
As of now I use radio 1.58 for hsupa on michy 6.1 rom and have fairly good gps.The steps above emulate my settings with exception of rom.
GOOD NEWS - GPS is working like a rabbit
Hi friends
Firstly, so thanks to all of my new friends, who were trying to reply and show me the way to solve the problems.
Secondly, I want to give u the good news. Now GPS is working as a champ.
But it is a little bit difference with some guides from u.
- I follow the steps above and change the baudrate to 9600, but after reset, it comes back to 4800 as default.
- The COMPORT for program is COM 4. For the hardware, I set default is NONE.
- Then, I install VisualGPS.BeeLineGPS.v1.83.Build.125 and reset. After that I run Visual GPS Beeline first, it works after 20 seconds and lock my location when I stay in my car (The weather now is -1 celcius degree outside - very cold).
- Then I run TOMTOM, I choose BUILT IN GPS (but not other NMEA). And TOMTOM works perfectly after 10 seconds - I did that because I remember that I always chose BUILT IN GPS when I used TT7 with this one two weeks ago.
And here are some tests after that:
- I turn on Wifi, open DATA connection (that is a issue when I use Kaiser, if Data connection is opening, TT7 can not receive the signal), then open TT7 (without openning the VISUAL GPS), it works after 12 seconds.
- I come into my room (the second floor in a three floors house) and turn on TT7 without using any other software, it lock after 10 seconds with average 5-8 sats.
WOW. It can't be better.
But I still don't know which one help which one. Because, when I installed TT7, then I run it for the first time yesterday, it said: could not run because of the memory available.
Then I try to run GoogleMap (even if I did not connect to Wifi - so ofcourse GoogleMap only turned on but did not run with data), then I tried to open TT7 again and it run (confuse here, who can explain to me)
The problem only now is.... WIFI. I hope can fix it soon as the instructions from CMONEX.
Thanks friends.
slight correction
just a minor correction to guide after you stating baud rate returning to 4800, in external gps settings on hardware tab to change baud I notice you need to set hardware com port to com 5 first then setting baud to 9600 ,then click ok to save.Go back in external gps settings and back to hardware tab ,as you will notice settings saved but now this time select none in hardware port and leave baud at 9600 then hit ok.
As I remember in ap4 4800 baud was default and worked best with that rom anyway,and so far it works for you.I do recommend setting use other nmea in tomtom input your baud and software com port settings from external gps control panel because you used visualgps to boot up your gps to get sat fixes for tomtom, with these settings you dont have to use visualgps to warm it up.Make sure you update your quickgps evrey 2 days then soft reset and hold phone by window or go outside when you use gps with new emphemeris file from quickgps as it can take a lil bit longer to regain track ironically ,but once you get fix itll be super quick no matter where you are,even if you soft reset.The only time you need to have clear view of sky again to get sat fix is if you turn off device completely for an hour or 2, or update quickgps data agn in 2 days (up to full 3 sometimes) or flash a new rom :>.
For wifi,I dont kno how to fix,cmonex prob has to send you a special file to regain mac address so wifi can work even after spl changes.