Finally I found time to publish my own cooked Extended Rom.
It is to be used together with the 1.72.601 QTek OS and Radio Roms
(do a search to find that upgrade).
Carefully read the Description.txt file on upgrade instructions.
I used the ExtRomUnlocker software because that keeps you from the flash-process which has a higher risk to mess up the device. Therefore I put together a RAR archive and not a NBF rom-image file.
I used this Extended Rom now for over 4 weeks without any trouble (for whats its worth to you . . .)
There is still one issue i am having with BT GPS and TomTom3: When TomTom cannot connect to the GPS (GPS off, BT off, GPS out of reach), it almost freezes the device. I work around this by simply not to try using TomTom without GPS connected.
Any clues on solving that are greatly appreciated.
Please post any remarks.
*******************************************************
2004-09-07: NEW version uploaded on page 2!!!!!!!!!!!!!!!!!!
*******************************************************
Is there a way to put that new iPaq PPCE for T-Mobile USA ROM/OS on my xdaII? -or is that a bad idea? -is it possible to get that ROM anywhere?
its a bad idea. This rom would make your XDA2 a piece of metal.
...ok, so if I'm on TMO USA will this 1.72 upgrade work fine for me? I've heard it's generally a bad idea to upgrade unless you're really unhappy...I'm on 1.60.00wwe & radio 1.10.00 -so how will I do better? I'm tempted just to wait til the SE is out...
The 1.72 OS & Radio rom will work fine for you.
See the other threads for the benefits, but they really come down to:
- improved BT
- improved battery life
My ExtRom can be of use too, but you will need to setup the T-Mobile USA specific settings (like GPRS, Voicemail, SMSC and maybe some more)
I have an MDA II, with the UK 1.72 Beta on it. Can I upgrade with this ROM, without any special configuration of the country id, or anything else. Or will this require some special changes to the .nbf, use of extended rom viewer, etc, etc.
I'm ok with upgrading a ROM, but I do not want to mess around with the device beyond that. Too many horro stories out there.
Ik heb een T-Mobile MDA II maar het is lang geleden dat ik heb geupgrade. Ik zit momenteel op 1.60WWE. Ik zie dat dit een extrom is, wat gaat er precies geupgrade worden? Zit er ook een nieuwere radio version bij of zijn het "enkel" o.a. de zaken die jij aangaf?
Enig idee wanneer SE uitkomt want ik ben al een paar maanden hier niet meer geweest
I have "SALAD ROM"
After modifying this ext. rom (except 'T-Mobile' setting), i have "Salad Rom' like this :
ROM version : 1.72.00WWE
date : 03/15/04
radio : 1.17.00
protocol : 1337.28
ext. rom : 1.72.900
before i was ext. rom 1.72.601qteq, 1.72.800imate, and now the latest version 1.72.900edsubsoft
and worked fine for me, untill SE out.
-------------
thank's for your hard job edsub
Re: I have "SALAD ROM"
ajong said:
After modifying this ext. rom (except 'T-Mobile' setting), i have "Salad Rom' like this :
ROM version : 1.72.00WWE
date : 03/15/04
radio : 1.17.00
protocol : 1337.28
ext. rom : 1.72.900
before i was ext. rom 1.72.601qteq, 1.72.800imate, and now the latest version 1.72.900edsubsoft
and worked fine for me, untill SE out.
-------------
thank's for your hard job edsub
Click to expand...
Click to collapse
Good job ajong!
I have mine cooked and ready but still waiting for my Xda II to hard reset on me.
Re: I have "SALAD ROM"
If I decide to use this ROM when the Official T-mobile comes out am I going to have country ID error problem again like when you have upgraded from... I-mate to T-mobile ROM or vise-versa? Or it is just straight forward upgrade?
Thanks!
[Krueger said:
Dr.Stein]
ajong said:
After modifying this ext. rom (except 'T-Mobile' setting), i have "Salad Rom' like this :
ROM version : 1.72.00WWE
date : 03/15/04
radio : 1.17.00
protocol : 1337.28
ext. rom : 1.72.900
before i was ext. rom 1.72.601qteq, 1.72.800imate, and now the latest version 1.72.900edsubsoft
and worked fine for me, untill SE out.
-------------
thank's for your hard job edsub
Click to expand...
Click to collapse
Good job ajong!
I have mine cooked and ready but still waiting for my Xda II to hard reset on me.
Click to expand...
Click to collapse
From the replies I think is about time to clear some things.
1. My archive is just the CONTENTS of a ExtRom that I put together. Benefits: All new versions & works together perfectly with 1.72qtek & contains customisations for T-Mobile Nl that I want.
2. Because its NOT an NBF, you DON'T have any country code issues on the ExtRom
3. For your device to work, you will at least need a 1.72 NON-Beta OS & Radio rom. I use the Qtek ones, but planning to upgrade radio to 1.17. Withe the OS & Radio you may entouter country code issues, but they can be solved via the instructions on this site. You will have country code issues when your device currently is not running a rom from the same distributor. ie: if your running an official T-Mobile rom you will encounter country code issues when using the 1.72 Qtek or iMate roms
Hope this helps . . .
Thanks for clarification...
edsub said:
From the replies I think is about time to clear some things.
1. My archive is just the CONTENTS of a ExtRom that I put together. Benefits: All new versions & works together perfectly with 1.72qtek & contains customisations for T-Mobile Nl that I want.
2. Because its NOT an NBF, you DON'T have any country code issues on the ExtRom
3. For your device to work, you will at least need a 1.72 NON-Beta OS & Radio rom. I use the Qtek ones, but planning to upgrade radio to 1.17. Withe the OS & Radio you may entouter country code issues, but they can be solved via the instructions on this site. You will have country code issues when your device currently is not running a rom from the same distributor. ie: if your running an official T-Mobile rom you will encounter country code issues when using the 1.72 Qtek or iMate roms
Hope this helps . . .
Click to expand...
Click to collapse
Sorry for the extra question but that didn't clear things up for me...
Leaving the C-code error aside which seems solvable, are saying with my current rom & radio (posted above) I can just download your 1.72 and will have no issues?
CDTV, you first have to get the 1.72 rom upgrade (for use of os & radio) from Qtek or iMate.
AFTER you upgrade to that os & radio, THEN you can use my ExtRom.
OK, but Ihave an xdaII from o2 bought from expansus & unlocked using w/TMO...am I out of luck to get the update? is it really worth it? (batt life & BT a lot better performance?)
From where I can download this 1.72.900 version upgrade?
From where I can download this 1.72.900 version upgrade?
@heshamsch:
errrrrrrr in the first post of this thread?
remember its only the contents of the ExtRom, You need a 1.72 os & radio to get it to work properly
@CDTV:
I cant judge if you wil benefit noticably
I benefitted (especially BT, to be used without any extra tools now!)
Remember the ExtRom contains (more or less) Éxtra's and NL specific customisations
edsub a lil help man
i got the official 1.72 WWE rom installed and considered installing this extended rom,but i do not know where to put the files in order to install or the process....is there some program i use to install a walk through would be greatly appreciated,also is the radio better than 1.14.00?
Ext Rom Tmobile
Hi, your Ext rom suits fine, but.....I use KPN as my prvider and would rather not see the T mobile screen when its starting up. Is this easy to fix within the ext Rom and if so how can i change this.
Thx
Ferry
this should be do-able.
You need to change the images that reside in one of the cab's.
Use ce cabmanager to open those. You can try this s/w a number of times before you have to buy.
You cant just put any bitmap in.
Search this forum on 'splash image' how to create your own (KPN i suppose) image: http://forum.xda-developers.com/viewtopic.php?t=3759&highlight=splash+image
Related
I am already reg. with I-mate as owner of one of it products, I got informations from them say that new room will be avilable soon it is ver. 1.66 for XDA II maybe next few days, and the windows Ver. is Windows 2003 SE
at all when I got the link to download it I will publish the link for everyone, Thank you for everyone published that great support using XDA II and XDA. it was great help to me to came very expert in solving problems to my XDA and XDAII
as my profile say then
i have
RUU 1.66.00WWE
RSU 1.10
on my qtek2020 it came with that
as far as i can tell it's not 2003 SE
specs
ROM version: 1.66.00WWE
ROM date> 02/20/04
Radio version 1.10.00
protocol version 1337.18
extOM version 1.66.140
I published what I already read in I-mate forum, I didn't have it yet ...... by the way all new edditions of XDAII coming with v. 1.66
so Rudegar
as it is getting really stressy to have the latest release... ;-)
do you have any ideas about the improvements with your
1.66.00 ROM over the 1.60.00
Alex
hmm, can you post a copy of your rom?
you can copy the rom with pmemdump from itsutils.
well it had that rom when i got it so i cant really compare it with 1.60 since i went from a xda1
i'll look into drumping the rom
but it does seem to have some auto settings and such for
some phone company
usually the phone company specific stuff is in the extended rom.
itsme:
usually the build number is just the ExtROM right? example, the latest tmobile rom i saw in the other thread had 1.60.36, but the os was simply 1.60.00, and the radio was 1.10.00, and the extrom was 1.60.36
does that mean that IF we extract whatever newest rom that comes out in the future and see that it has the same osrom ver and radio stack, merely upgrading the ExtROM is the best way to go?
I mean i know people prefer to only flash the ExtROM, but that's because they want to cook something up. But what if you just want to upgrade and not waste time with the OS if you see they still have the same number, does it HAVE to come hand in hand to upgrade? Or could you just bypass the others and upgrade the ExtROM and expect it to perform like a real update?
yes, that is what I usually do.
Can anyone share with us information on version 1.72 for XDA2: features, benefits, pros, cons... ?
Is worth upgrading from O2 1.60 ?
thanks
There are allready many threads on this.
But to conclude:
If you don't have any issues with your current version: stay with it.
You might consider 1.72 (the Qtek or iMate versions, NOT the T-Mobile beta) especially when:
1. You need certain Bluetooth options (ie serial port protocol) and don't want to mess around with hacks or extra 'tools'
2. Battery life is important
For me these points were enough to DO the upgrade (coming from 1.63 T-Mobile NL). And very happy with it.
Keep in mind that (unless you find a 1.72 from your own operator) you will have quite some work with getting all the customisations right.
One of these days I will post a good working set (no issues in a month holiday!!) of customisations to be used as a an extended rom for T-Mobile NL
i'm currently using the T-Mobile ROM v1.72WWE had no problem with it. the batt life was improved noticeably. I was using the O2 ROM v1.66WWE
as for my bluetooth i'm using the widcomm BT-PPC/PE v1.0.0 build 1400. no problems with it except that it turns off whenever i set my phone to standby mode.
downlaod
i have a qtek 2020 with rom 1.66 and it is doing a lot of problem which version is better and where can i download it
1.72 ROM Editing the Connectivity
Hi, I am v happy with the 1.72 ROM... I have successfully added my local GPRS setting for my operator.
but ... I can't edit my ISP GPRS settings.
In the select network, edit My ISP, the existing connections doesn't show up to allow me to edit the settings. No exisiting connection to "tap" on!?
please help!!
1.72 ROM
i have 'salad rom' with asian flavour(Included 'auto configuration' & 'o2 connect) and happy with it.
rom 1.72WWE, radio 1.17, ext.rom 1.72.900 (main rom by Qteq, radio by T-mobile, ext.rom by edsubsoft).
untill now ;
phone, gprs, activesync, run program, MS BT stack, sms, mms ........are running well. (maybe i am lucky with it)
keep to my salad untill SE come out.
---------------
many thanks to [Krueger] Dr. Stein, mamaich, itsme, edsub...
you are great man.
Most of the post regarding ROM Salads and customizations are beyond what I wish to perform on my device. To dat I have only loaded T-Mobile ROM upgrades that required nothing more than loading them automatically. I currently have the T-Mobile U7K Beta on my MDA II.
Can someone please explain the following:
1. Is there another T-Mobile 1.72 WWE available that I can load, non-beta?
2. I see other Custom ROMs on this site that state T-Mobile. Can I simply load those automatically or will I have to get into country ID, .nbf files, etc?
Ed
Official T-Mobile
Hi. Gratefuled
maybe this can help you : :?: :?:
http://forum.xda-developers.com/viewtopic.php?t=11169
ajong,
Thanks for the link. I have looked at that page/thread, but I think what I want is still not available.
I'm looking for an official T-Mobile 1.72 ROM, si I can get rid of the 1.72 Beta, or I'm looking for someone's custom ROM that I can load just like I could an official one. In other wors the custom I suppose would be ok, but I do not want to mess around with opeing the ROM and disecting and changing certain settings. Like I say, it just may not be out there.
Upgrading my ROM...HELP for newbie
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
I am planning of upgrading my unit to 1.72 but don't know where to start. Have downloaded a couple of 1.72ROM upgrade but don't know how it goes. Can Anyone help me step by step re: this procedure....
Presently in Manila with Smart as my provider,
Thank you in advance....
Ronnie
Upgrading my ROM...HELP for newbie
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
I am planning of upgrading my unit to 1.72 but don't know where to start. Have downloaded a couple of 1.72ROM upgrade but don't know how it goes. Can Anyone help me step by step re: this procedure....
Presently in Manila with Smart as my provider,
Thank you in advance....
Ronnie
I HAVE NO IDEA
Rontess wrote:
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
Sorry rontess, :?: :?:
I have no idea about your ROM (bootloader 1.06, am i alright??)
My friends in Jakarta said A LOT of problem about this device if upgrade to 1.72 ROM !!!
They want to sell it !!!
i hope you are lucky with your device.
maybe.. the others.. can help ???.
thank's
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.901 eDsubSofT (Nevermind the "1.60.36" that is in the nbf header)
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Post any comments
This thread is terminated. Plz see http://forum.xda-developers.com/viewtopic.php?p=65410 for the sucessor
Hi Edsub,
I have just downloaded 1.72.901 of yours and try to upgrade my mda 2 from t-mob.
what i have is te last beta version of t-mob 1.72.wwe boot version is 1.02
when i try to upgrade it with your version i get the following error
ERROR 122: EXTENDED IMAGE FILE CHEKSUM ERROR
Can you tell me what is it I am doing wrong???
Thanks
Hello edsub,
Does the 1.17 Radio version works with the 1.72 Fra, or it needs a french 1.17 Radio ?
Is that possible to upgrade only the radio ?
You can use this radio with your device. No language specifics in it.
(as I was told)
The checksum suprises me.
I can open the ms_.nbf with er2003edit with the normal key.
can you?
edsub said:
You can use this radio with your device. No language specifics in it.
Click to expand...
Click to collapse
Ok, and is it possible to install the 1.17 alone, without upgradeing all the device ?
Did you notice differences between 1.14 and 1.17 ?
You can upgrade every part separately from the others.
Just delete the NBF's you dont want to upgrade
Radio.nbf = Radio ROM
NK.nbf = OS ROM
MS_.nbf = ExtROM
Does this upgrade of the Radio only requires a hard-reset at the end ?
did a radio upgrade only
(removed the OS and Extended rom bkf files).
Device is dead (displays SERIAL after Cold Reboot).
Recommandation: don't do RADIO only, upgrade OS + Radio + Extended Rom whatever you're told.
btw, Extended Rom is corrupted.
I noticed the extROM was not OK.
Just uploaded a new archive wich should do the job ok.
@tde: oops, I just read that on the wiki-page
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing?version=8
no problem edsub, I should have read it too before starting flashing... this is not my first upgrade so I have no real excuse
just back to my old imate 1.72WWE, it's been a while since I didn't flashed my device, this rom is really OK.
@tde, do you mean you have succesfully installed my roms or did you revert to your own?
edsub,
Are you saying that the extended rom you have developed is not ok?
Is this ROM save to load on MDA II, which has only had T-Mobile ROMs on it?
edsub, is this the ROM I requested?
Edsub
I re-flashed with the latest Rom from IMATE I had (1.72WWE), but upgraded the radio to 1.17 by the way.
Now I have to recreate a new extended ROM ...
@ Gratefuled: My ExtRom was ok, only the NBF file to be used to flash was corrupted. This means that in the first upload version of the upgrade archive (see first post inthis thread) you could simply NOT upgrade the extRom (upgrade utility refuses it).
The currently available RUU172901_eDsuBsofT.exe should be ok.
@tde: The ExtRom in the new version should be ok. The OS rom inside my archive is the same as your iMate OS rom (Qtek and iMate 1.72.00WWE OS roms are the same).
@all: Still waiting for comments on the newly uploaded archive
Home-cooked 1.72.901 upgrade package (1.72.00/1.17.00
@ Edsub,
Hi,
I have succesfuly flashed my mda 2 with your rom. It worked just fine i wil try this further and post my coments.
thanks,
keep up the good work.
I am a new qtek 2020 user.
Can i use this rom for the provider proximus here in belgium ?
Basically you can. But for the extended rom contents I would advise you to get in contact with others on Proximus for the specific network (ie GPRS) settings.
Also, you might not like the T-Mobile startup splash screen.
And: You HAVE to update the "country id" (=operator/device identifier)
.
What bootimage does it have?. Does it has the T-mobile BETA bootimage?. I don't mind the T-mobile image, just not the beta part
It has the 'normal'(ie not beta) T-Mobile boot-image.
Images were taken from 1.60.36 rom
Is this upgrade the Windows Mobile 2003 SE equivalent?
So when flashed it has the same software features as described for the Qtek 9090?
When flashed to Tmobile, can I still change the settings to telford? Has anyone don that already?
thanks
Hello,
I am looking for the latest Rom update For my Qtec 2020.
I Currently have 1.66 WWE
I need 1.72 WWE
Etended Rom 1.72.800 (i think)
And radio version 1.17 or later.
Can someone help me to upgrade my Hymalaya ?
Where Can I get these Files ?
So it is without Provider !
Thanx in advance.
The provider specific bits are in the ExtRom.
So in fact you can use any 1.72.00 upgrade file and delete the ms_.nbf file before proceding.
Afterwards you can fill your Extended Rom with the applications you want using the Extended Rom Unlock tools.
BTW: This is always a better solution because using a 'wrong' ExtRom could get you into CountryID trouble with the next upgrade.
There are numerous posts with 1.72.00 rom upgrades in it, but I :lol: would recomend my RUU172902WWE upgrade. It is documented what the files in the ExtRom all do, so its simple to skip the operator specific ones.
1.72WWE
Hello,
I have trouble finding the Rom you describe.
Do you have a download link for me ?
Thanx
This is the thread:
http://forum.xda-developers.com/viewtopic.php?t=11781&highlight=ruu1729*
I have upgraded with http://www.qtek.nu/files/RUU172752WWE.zip and it works fine. However do not forget to first backup and then Hard reset the device before upgrading
Hey all,
I have just purchased an iMate JasJam from Telstra (was a cheap display model) and i have signed up to three mobile. I want to access planet three and do everything as if i had brought the phone on three.
Can i just install the Dopod 838 Pro ROM?
Can someone post a link to a Dopod ROM? as im not allowed into the dopod website due to me not actually owning a dopod!
Any help greatly appreciated!
Regards,
Geordie
Check the Wiki, mate...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Look for Dopod in the WWE Versions list...
Baggy
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
geordieb said:
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
Click to expand...
Click to collapse
To use planet 3 all you have to do is type three.net.au in ie.
before you can do that you will need the settings for 3services, 3mms and or 3netaccess configured. There is a tool that does it on wm6. link is below, you can try it for your WM5 rom. The dopod rom will only serve you to remove any telstra programs. If the cab program below doesnt work there is a thread which has the settings for you to enter manually.
*edit* the cab file has been removed from the thread (first one below) you will have to check back again to get it.
http://forum.xda-developers.com/showthread.php?t=299023
http://forum.xda-developers.com/showthread.php?p=1211919&highlight=australia+cab#post1211919
Dopod ROM for 3 Aus
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Click to expand...
Click to collapse
Hey mate,
Yeah, i cant log into the dopod site as i have an imate so it doesnt accept the serial number. If you could download it and post it on a filesharing site or something, that would be awesome. I know they are fairly big so i assume that writes email out (i have space, im on gmail)
Also, is WM6 good? where do i upgrade?
Thanks so much for your help
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Puckster said:
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Click to expand...
Click to collapse
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Binyo said:
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Click to expand...
Click to collapse
y dont you download the nbh and extract it?
walshieau said:
y dont you download the nbh and extract it?
Click to expand...
Click to collapse
I already have the ExtROM but I couldn't find the network wizard cab file.
Can anybody upload the NetWiz.cab from 838Pro (WM5) ROM code for Hutchison ‘3’ Australia Network - version 1.30.707.8?
Thanks in advanced.
These settings are pretty hard to find. I think it's all I've done all night.
Courtesy of a thread on Aussie3G, I got a link to a thread on this site.
http://forum.xda-developers.com/showthread.php?t=298936
Amongst the attachments on that thread is a "CWW Enterprises AUS Operator Con.cab"
This program has configuration settings for the Australian carriers, including "Three".
I've just run it and it's created 3mms, 3services & 3netaccess, but I'm still having troubles with email. I'll be leaving it to another day now.
If you can get it all working, please tell me how
Cheers, Oggy.
User Agent String From 1.30.707.8 PIE
Hi can anybody on 3AU with the latest firmware from Dopod; 1.30.707.8, go to this web site; "www.useragentstring.com" with pocket IE and post the results from "your user agent string box" your help would be greatly appreciated
Since Dopod838 is now officially supported on X series and Planet 3, im trying to get Black 3.5 working with it completely.