Related
Suddenly, by USB sync is gone. I can BT ActiveSync and serial, but no USB. I am sure it's something in software, because after hardreset it recognized via USB again.
Any ideas?
TIA
little help
:idea: I had the same problem twoweeks ago ,and I realized that from some strange reason one small application repllog.exe (located in windows directory) is not activated anymore. This aplication activates USB communication, and when you run this manually -active-sync will work. However I dont know how to fix this problem to run it automaticcaly, but -i don´t want it eather, because of I´m using connectionto internet through GPRS of my XDA2 (WModem+HTC USB modem driver+USB modem dialer) and automatic sync via ActiveSync makes collision in communication (blocking USB port)......
From M$ site:
PRB: ActiveSync May Stop Responding or May Not Connect After Many Soft Resets
SYMPTOMS
If you soft reset Microsoft Windows Mobile 2003 for a Pocket PC device or for a Pocket PC Phone Edition many times, the device may stop responding when you synchronize with Microsoft ActiveSync through a serial cable or a USB cable. Infrared transfer speeds are not affected.
RESOLUTION
Hard reset your Pocket PC device. For more information about how to perform a hard reset, see your device documentation.
MORE INFORMATION
Restoring an ActiveSync backup may not resolve this problem if the backup was made when the problem existed.
To reproduce the problem, perform a soft reset several hundred times.
I've root it down this problem to notifications queue. Memmaid apprently killed repllog.exe, as mcmills correctly pointed out.
I also recently encountered this problem. I cannot, however, find repllog.exe.
I even usedthe search function but the file is just not there. I am an
experienced user and I do not remember deleting anything.
By the way, I'm using Windows 2000 SP2.
repllog.exe
For>ahro
this file is not in PC, but in XDAII, so you need to look there: XDAII_root\Windows\repllog.exe ....
AT last I done with this help and use widcomm Bluetooh Software 1.4.2 bulid 10 now my active snc work great with wm2003se ..
This issue may occur because the Bluetooth drivers that are provided by Microsoft support a different set of profiles than the drivers that are provided by some third-party vendors. The Microsoft-provided drivers are also signed and will therefore be installed instead of a third-party driver for supported Bluetooth adapters. The Windows XP SP2 Setup program will try to detect if a third-party driver is present. If the third-party driver is installed, the Microsoft-provided Bluetooth drivers will not install. This action makes sure that an existing configuration is not modified. If both provided drivers were installed, and the Bluetooth Radio were connected to the computer, the Microsoft-provided driver would load because it is signed.
If the missing functionality is critical, you may restore the third-party support. To do this, follow these steps.
Note The following steps assume that the third-party software is installed. If it is not, install the software according to the manufacturer's instructions. Then follow these steps from the point in the installation process where the adapter is connected to the computer.1. Click Start, and then click Run, type devmgmt.msc, and then click OK.
2. Locate and then expand Bluetooth Radios.
3. Right-click the Bluetooth adapter, and then click Properties.
4. On the Driver tab, click Update Driver.
5. Install the updated driver manually by using the Have disk option in the wizard. Locate the manufacturer's installation files, and then find the .inf file that is required to install the driver.
6. Complete the manufacturer's software installation steps.
At this point, the third-party provided drivers should work. If at any point you re-enumerate the Bluetooth adapter, the Microsoft driver will be reinstalled, and you must repeat the procedure. This issue will occur only if the third-party driver is removed or if another model adapter installed.
SOWTARE LINK IS HERE
ther is software link
http://asia.giga-byte.com/Communication/FileList/Driver/btd01.v.1.4.2.10.zip
But can this update work fine with both BT earpiece & BT ActiveSync and BT internet ?
To ranajee_87:
You mean installing a new BT driver on your PC? Is that what solved your BT Active Sync problem?
Regards.
:?:
Hi Looking Glass
yes after thats my bt active snyc is working with rom 2.06 thats it
More troubles
Hi ranajee_87!
Thanks for your help.
However I have tried and my Notebook failed the Widdomm upgrade. I got the program here in the forum, but after a full install my PC said that my "license" did not allowed me to use the product. I have an Acer Notebook with factory installed Widcomm drivers, but Acer has not posted any upgrade to the BT programs.
Are you familiar with that?
:?:
Hi looking Glass
yes i have face smae problem after thats but i done with these steps and my widcommm driver is working no more liance isseue may be these steps help you
Note The following steps assume that the third-party software is installed. If it is not, install the software according to the manufacturer's instructions. Then follow these steps from the point in the installation process where the adapter is connected to the computer.
1. Click Start, and then click Run, type devmgmt.msc, and then click OK.
2. Locate and then expand Bluetooth Radios.
3. Right-click the Bluetooth adapter, and then click Properties.
4. On the Driver tab, click Update Driver.
5. Install the updated driver manually by using the Have disk option in the wizard. Locate the manufacturer's installation files, and then find the .inf file that is required to install the driver.
6. Complete the manufacturer's software installation steps.
At this point, the third-party provided drivers should work. If at any point you re-enumerate the Bluetooth adapter, the Microsoft driver will be reinstalled, and you must repeat the procedure. This issue will occur only if the third-party driver is removed or if another model adapter installed.
BT drivers
Hi ranajee! Thanks for your continuous help.
In the latest attempt, I ended with NO BT drivers at all, even after a Restore to a previous date. MS drivers simply don't work, and the Widcomm ones are a bit of a mess plus the "license" system is cumbersome. I'm afraid a new attempt will roll me back a couple of days ago, when I -literally- reformated the Hard disk to factory state after hours lost with the BT drivers.
I feel the whole BT stack issue will never be fixed, since the effort is going to the IIs and III models who already come out from factory with properly working BT drivers.
Plus, in the minus side, I've had a couple of times the "dual stereo" effect back. Even the behaviour of the Headset and the Bt Carkit is somewhat impredictable.
Really, BT in the XDA should be dubbed "BS", Bull ....hit.
Thanks anyway. :wink:
____________________________________________________________
Qtek 2020 (SE ROM 2.20 CHS translated) +SD WiFi Sandisk + BT Sony Ericsson HBH 35 + SD memory cards + BT BMW Carkit
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
koenie said:
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
Click to expand...
Click to collapse
My problem is same to you ,
Any one can help?
leeleeguo said:
My problem is same to you ,
Any one can help?
Click to expand...
Click to collapse
which bluetooth stack are you using?
toshiba?
gokhanmoral said:
which bluetooth stack are you using?
toshiba?
Click to expand...
Click to collapse
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
leeleeguo said:
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
Click to expand...
Click to collapse
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
gokhanmoral said:
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
Click to expand...
Click to collapse
It's ok,also need to del the unused serial port
Thank you
Hello
I've managed to select the incoming port in Activesync to COM6
and set the outgoing port on my S200 to COM6
but the pda is reporting that he doesn't find a computer that supports Activesync, although they are paired
I'm using the Widcomm stack
the widcomm program is reporting these 3 services are available on the pda:
- Connect NPA & Dialup & voice Gateway, serial port is not one of them
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
moahrs said:
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
Click to expand...
Click to collapse
From any file manager, Share > Bluetooth
or you could use Bluetooth File Transfer, avalaible on the market for free, it that case it comes with a built-in file manager and also can browse remote files. You can also do Share> Send with bluetooth with this app from any file manager.
EDIT: This should have been posted in X10 mini general as this is a DEV forum.
EDIT2: Correction not General, the Q&A forum, I just noticed it XD.
Ty for help, i will testing, and sry for post in wrong place.
ty a lot
Moacir Jr.
I was tested, and i am not found the "share", in my windows xp, this option dont exist.
I discovered that if i use the "%windir%\system32\fsquirt.exe" in the option "receive file", i can send file from phone to PC, but is a unique file. I need to start aways i to send a file from phone to pc.
With Bluetooth File Transfer is the same, him only connect with PC and send a unique file, if the program above is started.
Ty a lot
Moacir Jr.
If your saying that you are trying to access the phone like a windows network share, you need to go to bluetooth file transfer and turn on the Sharing Service (FTP).
EDIT: Forget what I said, since you are using fsquirt.exe, I assume you are using the default windows bluetooth stack. Its just simply there was no software listening for incoming transfers, hence the need to start fsquirt. Anyways, this is not a problem with the phone, in fact you should take it to a windows PC forum, as your problem has nothing to do with your phone.
Hi xda,
I am glad to be here and to know this site, almost for masters! (which I am not)
Guys, I just want to know if anyone have or had my same issue with the bluetooth when I connect my HTC HD2 to my PC for listening the music, same like in the car.
No matter which ROM I installed, T-Mobile 3.14, Custom or any stock I can't connect via Stereo Audio to my pc.
I can transfer files, I can navigate into my HD2 via bluetooth BUT when I try to connect via Stereo Audio it fail, please see the attachment.
I also can't use audio via Hands-free, practically I do everything but without Stereo Audio.
I already installed update for my bluetooth on my PC.
I try to fix this problem all month and I realized the problem are the drivers on my phone (or ViceVersa ), because if I use Android with my HTC HD2 it works.
I use most of the time WM 6.5 and I want to connect to my car stereo or PC via bluetooth to listening the music but I have this problem.
Nothing helped me jet and I do not find any fix of any kind so my question is if there is any fix for this problem?
Please help, I appriciate if some one can help me.
Thankx.
..no solution? :crying:
No fix at all? Why?
:crying:
Uhaaa, Uhaaa, uhaaaaaa :crying:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Mister B said:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Click to expand...
Click to collapse
oh, Mister B, I start to like you!
This issue was wrote some where and few people know about it but nobody said how to fix this.
I used my old HTC Diamond 2 via bluetooth to listening music on my laptop with speakers but somehow with HD2 it is impossible, and supposed to be "newer" than diamond.
I can connect stereo audio with my HD2 after run Android, so basicly this issue is some driver or something like that in my ROM.
To be sure I also tried Stock ROM and 3 different ROM and All of them have this issue. I just don't know where to look.
I can live with this but I can't believe there is no fix for this, that's why I can't slipping in the night!
Let me know.
Cheers.
I just want to say this, I use all the time Windows Mobile 6.5 and sometime Android, so I will be glad if this issue will be solved on my WM6.5......
Problem with HD2 BT was mainly due to change of BT stack manufacturer thus a few new driver issues that never really got worked out fully.
Once I got some time free & am at my work PC I will run through it & see what results I get.
I'm on WM6.5.3 as in signature ...
Well I put work on hold & had a play, works fine for me on 6.5.3 & windows 7 Notebook with built in BT module.
I got same initial issue as you with 1 driver error, I tried correcting from device manger by checking windows update with no result & then manually searched whole of C:\ drive for driver with no result.
I then looked in folder with our HD2 files (company using over 20 HD2s at present) & found Bluetooth driver zip file.
unzipped them to desktop & went back into device manager & manually searched driver, got disc option & choose inf file on desktop & it installed fine.
reconnected bluetooth between HD2 & Notebook via bluetooth options on HD2 & selected stereo audio & then tested by selecting some music to play on my HD2 ...
Result was some rather loud music blasting out of the notebooks rather good Altec Lansing speakers & my Boss fully aware of my poor work ethics :-S
Couple of screen shots below & the bluetooth driver files in a zip archive.
May take a bit of messing around to get driver installed or perhaps deleting any current Bluetooth partnership & starting new but result should be worth it
Picture shows ActiveSync connected which it was via WMDC at time, I also tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Mister B said:
Well I put work on hold & had a play, works f...........
........................................ tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Click to expand...
Click to collapse
Sorry but this time I am unlacky.
I did like you said. First of all I uninstalled all bluetooth drivers and devices from my lap. I rebooted and the pc compleated the reinstall of basic bluetooth option with no error. So I put on desktop the zip file which you give me and I extract the driver to a folder. I connected the phone via bluetooth and like all the time I got the error of the peripherial drive missing. So via Device Manager I finded the Bluetooth Peripherial Device and I manually selected to Update the driver, Browse my computer, Let me pick up...., Have a disk, Install from disk, and I browse to the folder where I extract the driver from your zip and I can't install it. See the attachment.
I got Windows 7 with WMDC, my bluetooth hardware on laptop is Broadcom, my HD2 rum WM 6.5.
I don't know what is going on with this stuff.....
PS: I hope you do not risk your position at work to have fun with this stuff....
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Mister B said:
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Click to expand...
Click to collapse
Windows 7 32bit,
the WMDC is update already and work fine,
the manufacturer Broadcom webside do not update or fix the driver for my hardware Broadcom, I allredy did and I downloaded the app to update the Broadcom hardware and the app saing "We can't update your hardware" I said WHAT? F..k you! I read about this somewhere and the responsibility is the manufacturer of my laptop, SONY, so for all of them there is not any issue with this hardware bluetooth, and I think they are right.
.cat file is not on the list because when I serching for the driver, the only one which the hardware need is .inf, .inf is linked to .cat, if this link in your driver, which you give me, is broken or lost, I can't do anything about it. I got only this two files, .inf & .cat.
What I think, like I said few post before, is not the problem of my laptop (Sony Vaio FW21M) but is with the drivers into the HD2, because when I use Android no problem at all. If my laptop was the problem I will never connect anything via stereo audio via bluetooth.
Also you do not mentioned which ROM you using on you HD2, is not the same as mine so there will be the difference. The difference is into the ROMs.
Probably this issue have to be forced via registry or via .cab with some fix or driver but no luck at all at the moment and I can't believe is just ME.
PS: Thanks for help me anyway! I allredy clicked on thanks for you!
..and please, if you find something for my case, please, let me know ASAP!
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Mister B said:
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Click to expand...
Click to collapse
Well, my is much older, CRACING WM 6.5 OS 21889,
Ok, so this error during the installation is weird? or is a manual installation techniques isssue :angel:, so it's me.
Can you, pleasee, explain to me step by step how to do the update of the driver from your zip, pleasee...
I want try again, I can't give up! Perhaps I did something wrong.
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Mister B said:
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Click to expand...
Click to collapse
I did all what you said and all the same, my anti-virus is fine and the file still in the folder and also I put them in C:\,
Always the same error.
Few weeks ago I also saw the forum about this issue and I try to follow the instruction from the webside, same which you give me, but like many I do not have "Microsoft Corporation" on the list of drivers with "Windows Mobile-Based Device Support". (and I do not have AMD, but Intel)
And there is no highest update of WMDC 6.1, still all the same last version.
My drivers of my laptop much udated than now can't be.
Ok, I give up, this stupid Scientists and Engineers made Hi-End stuff whit issues and no solution for it.
We can't do nothing about it.
Problem solved!
If any one had and have right now this problem and need a solution this is the right place!!
I find the solution, was the Mobile Radio 2.15.xx.xx_x.
Yes, I solved the problem after months of pain and tests.
I downgrade the radio to 2.08.50.05 and all working now, from first play, even Android, amazing.
Thanks for all the support.