Hi xda,
I am glad to be here and to know this site, almost for masters! (which I am not)
Guys, I just want to know if anyone have or had my same issue with the bluetooth when I connect my HTC HD2 to my PC for listening the music, same like in the car.
No matter which ROM I installed, T-Mobile 3.14, Custom or any stock I can't connect via Stereo Audio to my pc.
I can transfer files, I can navigate into my HD2 via bluetooth BUT when I try to connect via Stereo Audio it fail, please see the attachment.
I also can't use audio via Hands-free, practically I do everything but without Stereo Audio.
I already installed update for my bluetooth on my PC.
I try to fix this problem all month and I realized the problem are the drivers on my phone (or ViceVersa ), because if I use Android with my HTC HD2 it works.
I use most of the time WM 6.5 and I want to connect to my car stereo or PC via bluetooth to listening the music but I have this problem.
Nothing helped me jet and I do not find any fix of any kind so my question is if there is any fix for this problem?
Please help, I appriciate if some one can help me.
Thankx.
..no solution? :crying:
No fix at all? Why?
:crying:
Uhaaa, Uhaaa, uhaaaaaa :crying:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Mister B said:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Click to expand...
Click to collapse
oh, Mister B, I start to like you!
This issue was wrote some where and few people know about it but nobody said how to fix this.
I used my old HTC Diamond 2 via bluetooth to listening music on my laptop with speakers but somehow with HD2 it is impossible, and supposed to be "newer" than diamond.
I can connect stereo audio with my HD2 after run Android, so basicly this issue is some driver or something like that in my ROM.
To be sure I also tried Stock ROM and 3 different ROM and All of them have this issue. I just don't know where to look.
I can live with this but I can't believe there is no fix for this, that's why I can't slipping in the night!
Let me know.
Cheers.
I just want to say this, I use all the time Windows Mobile 6.5 and sometime Android, so I will be glad if this issue will be solved on my WM6.5......
Problem with HD2 BT was mainly due to change of BT stack manufacturer thus a few new driver issues that never really got worked out fully.
Once I got some time free & am at my work PC I will run through it & see what results I get.
I'm on WM6.5.3 as in signature ...
Well I put work on hold & had a play, works fine for me on 6.5.3 & windows 7 Notebook with built in BT module.
I got same initial issue as you with 1 driver error, I tried correcting from device manger by checking windows update with no result & then manually searched whole of C:\ drive for driver with no result.
I then looked in folder with our HD2 files (company using over 20 HD2s at present) & found Bluetooth driver zip file.
unzipped them to desktop & went back into device manager & manually searched driver, got disc option & choose inf file on desktop & it installed fine.
reconnected bluetooth between HD2 & Notebook via bluetooth options on HD2 & selected stereo audio & then tested by selecting some music to play on my HD2 ...
Result was some rather loud music blasting out of the notebooks rather good Altec Lansing speakers & my Boss fully aware of my poor work ethics :-S
Couple of screen shots below & the bluetooth driver files in a zip archive.
May take a bit of messing around to get driver installed or perhaps deleting any current Bluetooth partnership & starting new but result should be worth it
Picture shows ActiveSync connected which it was via WMDC at time, I also tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Mister B said:
Well I put work on hold & had a play, works f...........
........................................ tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Click to expand...
Click to collapse
Sorry but this time I am unlacky.
I did like you said. First of all I uninstalled all bluetooth drivers and devices from my lap. I rebooted and the pc compleated the reinstall of basic bluetooth option with no error. So I put on desktop the zip file which you give me and I extract the driver to a folder. I connected the phone via bluetooth and like all the time I got the error of the peripherial drive missing. So via Device Manager I finded the Bluetooth Peripherial Device and I manually selected to Update the driver, Browse my computer, Let me pick up...., Have a disk, Install from disk, and I browse to the folder where I extract the driver from your zip and I can't install it. See the attachment.
I got Windows 7 with WMDC, my bluetooth hardware on laptop is Broadcom, my HD2 rum WM 6.5.
I don't know what is going on with this stuff.....
PS: I hope you do not risk your position at work to have fun with this stuff....
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Mister B said:
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Click to expand...
Click to collapse
Windows 7 32bit,
the WMDC is update already and work fine,
the manufacturer Broadcom webside do not update or fix the driver for my hardware Broadcom, I allredy did and I downloaded the app to update the Broadcom hardware and the app saing "We can't update your hardware" I said WHAT? F..k you! I read about this somewhere and the responsibility is the manufacturer of my laptop, SONY, so for all of them there is not any issue with this hardware bluetooth, and I think they are right.
.cat file is not on the list because when I serching for the driver, the only one which the hardware need is .inf, .inf is linked to .cat, if this link in your driver, which you give me, is broken or lost, I can't do anything about it. I got only this two files, .inf & .cat.
What I think, like I said few post before, is not the problem of my laptop (Sony Vaio FW21M) but is with the drivers into the HD2, because when I use Android no problem at all. If my laptop was the problem I will never connect anything via stereo audio via bluetooth.
Also you do not mentioned which ROM you using on you HD2, is not the same as mine so there will be the difference. The difference is into the ROMs.
Probably this issue have to be forced via registry or via .cab with some fix or driver but no luck at all at the moment and I can't believe is just ME.
PS: Thanks for help me anyway! I allredy clicked on thanks for you!
..and please, if you find something for my case, please, let me know ASAP!
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Mister B said:
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Click to expand...
Click to collapse
Well, my is much older, CRACING WM 6.5 OS 21889,
Ok, so this error during the installation is weird? or is a manual installation techniques isssue :angel:, so it's me.
Can you, pleasee, explain to me step by step how to do the update of the driver from your zip, pleasee...
I want try again, I can't give up! Perhaps I did something wrong.
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Mister B said:
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Click to expand...
Click to collapse
I did all what you said and all the same, my anti-virus is fine and the file still in the folder and also I put them in C:\,
Always the same error.
Few weeks ago I also saw the forum about this issue and I try to follow the instruction from the webside, same which you give me, but like many I do not have "Microsoft Corporation" on the list of drivers with "Windows Mobile-Based Device Support". (and I do not have AMD, but Intel)
And there is no highest update of WMDC 6.1, still all the same last version.
My drivers of my laptop much udated than now can't be.
Ok, I give up, this stupid Scientists and Engineers made Hi-End stuff whit issues and no solution for it.
We can't do nothing about it.
Problem solved!
If any one had and have right now this problem and need a solution this is the right place!!
I find the solution, was the Mobile Radio 2.15.xx.xx_x.
Yes, I solved the problem after months of pain and tests.
I downgrade the radio to 2.08.50.05 and all working now, from first play, even Android, amazing.
Thanks for all the support.
Related
AT last I done with this help and use widcomm Bluetooh Software 1.4.2 bulid 10 now my active snc work great with wm2003se ..
This issue may occur because the Bluetooth drivers that are provided by Microsoft support a different set of profiles than the drivers that are provided by some third-party vendors. The Microsoft-provided drivers are also signed and will therefore be installed instead of a third-party driver for supported Bluetooth adapters. The Windows XP SP2 Setup program will try to detect if a third-party driver is present. If the third-party driver is installed, the Microsoft-provided Bluetooth drivers will not install. This action makes sure that an existing configuration is not modified. If both provided drivers were installed, and the Bluetooth Radio were connected to the computer, the Microsoft-provided driver would load because it is signed.
If the missing functionality is critical, you may restore the third-party support. To do this, follow these steps.
Note The following steps assume that the third-party software is installed. If it is not, install the software according to the manufacturer's instructions. Then follow these steps from the point in the installation process where the adapter is connected to the computer.1. Click Start, and then click Run, type devmgmt.msc, and then click OK.
2. Locate and then expand Bluetooth Radios.
3. Right-click the Bluetooth adapter, and then click Properties.
4. On the Driver tab, click Update Driver.
5. Install the updated driver manually by using the Have disk option in the wizard. Locate the manufacturer's installation files, and then find the .inf file that is required to install the driver.
6. Complete the manufacturer's software installation steps.
At this point, the third-party provided drivers should work. If at any point you re-enumerate the Bluetooth adapter, the Microsoft driver will be reinstalled, and you must repeat the procedure. This issue will occur only if the third-party driver is removed or if another model adapter installed.
SOWTARE LINK IS HERE
ther is software link
http://asia.giga-byte.com/Communication/FileList/Driver/btd01.v.1.4.2.10.zip
But can this update work fine with both BT earpiece & BT ActiveSync and BT internet ?
To ranajee_87:
You mean installing a new BT driver on your PC? Is that what solved your BT Active Sync problem?
Regards.
:?:
Hi Looking Glass
yes after thats my bt active snyc is working with rom 2.06 thats it
More troubles
Hi ranajee_87!
Thanks for your help.
However I have tried and my Notebook failed the Widdomm upgrade. I got the program here in the forum, but after a full install my PC said that my "license" did not allowed me to use the product. I have an Acer Notebook with factory installed Widcomm drivers, but Acer has not posted any upgrade to the BT programs.
Are you familiar with that?
:?:
Hi looking Glass
yes i have face smae problem after thats but i done with these steps and my widcommm driver is working no more liance isseue may be these steps help you
Note The following steps assume that the third-party software is installed. If it is not, install the software according to the manufacturer's instructions. Then follow these steps from the point in the installation process where the adapter is connected to the computer.
1. Click Start, and then click Run, type devmgmt.msc, and then click OK.
2. Locate and then expand Bluetooth Radios.
3. Right-click the Bluetooth adapter, and then click Properties.
4. On the Driver tab, click Update Driver.
5. Install the updated driver manually by using the Have disk option in the wizard. Locate the manufacturer's installation files, and then find the .inf file that is required to install the driver.
6. Complete the manufacturer's software installation steps.
At this point, the third-party provided drivers should work. If at any point you re-enumerate the Bluetooth adapter, the Microsoft driver will be reinstalled, and you must repeat the procedure. This issue will occur only if the third-party driver is removed or if another model adapter installed.
BT drivers
Hi ranajee! Thanks for your continuous help.
In the latest attempt, I ended with NO BT drivers at all, even after a Restore to a previous date. MS drivers simply don't work, and the Widcomm ones are a bit of a mess plus the "license" system is cumbersome. I'm afraid a new attempt will roll me back a couple of days ago, when I -literally- reformated the Hard disk to factory state after hours lost with the BT drivers.
I feel the whole BT stack issue will never be fixed, since the effort is going to the IIs and III models who already come out from factory with properly working BT drivers.
Plus, in the minus side, I've had a couple of times the "dual stereo" effect back. Even the behaviour of the Headset and the Bt Carkit is somewhat impredictable.
Really, BT in the XDA should be dubbed "BS", Bull ....hit.
Thanks anyway. :wink:
____________________________________________________________
Qtek 2020 (SE ROM 2.20 CHS translated) +SD WiFi Sandisk + BT Sony Ericsson HBH 35 + SD memory cards + BT BMW Carkit
I installed 2005, and couldn't sych at all by AS4, everytime it tried to connect, i said looking for changes and then a protection fault, so I downgraded to wm2003se and active sych couldnt connect, I reinstalled AS 3.7 and then 3.8, but it can not run at all it just starts connecting, then stops and I can not show Activesynch window, it can not even explore the device
does anybody have a solution for this, or do I have to format and reinstall windows
yo medman
personally i think it was a bad mistake to upgrade to W2005. cause its still in the development phase and u wont find a lot of help from us users cause most of us are still waiting for a stable version to come out
looking at u'r situation
hard reset u'r PPC, do not connect u'r USB.....now install 3.8 MSYNC....... restrt u'r computer.....n then once rebooted......connect the USB cradle with u'r comp and put in u'r PPC...
it shld work now..
best of luck
sync problem...solved!
hey medman,
i don't see why every one is dissing wm2005, its a great rom!
but for the people who are having problems with connecting their device with wm2005 to ActiveSync 4.0 i figured out what is wrong:
if you connected your device to your computer before you installed the new
ActiveSync, it set your device with no driver, and even if you have the
ActiveSync driver now you computer allready recognised your device, so:
the solution is to delete the device setting under device manager of your
computer [start->control panel->system->hardware->device manager]
now with device manager open and with you ppc not connected:
go to the view tab and check "show hidden devices"
then look for the driver of the ppc most likely under the "Non-Plug and Play
Drivers" but if it is not there look around for the driver
when you find it, you went to delete it by right-clicking on the driver and
clicking uninstall
after you delete the old driver have ActiveSync running and place your ppc in the cradle, and the new driver should be installed by ActiveSync 4.0
if you need activesync 4.0 just tell me and i can give you my sight that i uploded as4.0 and wm2005 in a rar file, by the way...most answers are being found on this topic http://forum.xda-developers.com/viewtopic.php?t=18584&postdays=0&postorder=asc&start=0
re:
To rooschool: I did what u suggested but same...
To Destroyer7337:
I didn't connect the ppc before the active sych, I raid this topic before I tried wm2005, I took all the precautions u mentioned, but to no avail, any way I downgraded to 2003se bu I cannot synch with all versions of activesynch
Driver?
What is the name of the driver? I can't find anything in non plug and play and I'm not sure what I'm looking for.
Ryan
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
moahrs said:
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
Click to expand...
Click to collapse
From any file manager, Share > Bluetooth
or you could use Bluetooth File Transfer, avalaible on the market for free, it that case it comes with a built-in file manager and also can browse remote files. You can also do Share> Send with bluetooth with this app from any file manager.
EDIT: This should have been posted in X10 mini general as this is a DEV forum.
EDIT2: Correction not General, the Q&A forum, I just noticed it XD.
Ty for help, i will testing, and sry for post in wrong place.
ty a lot
Moacir Jr.
I was tested, and i am not found the "share", in my windows xp, this option dont exist.
I discovered that if i use the "%windir%\system32\fsquirt.exe" in the option "receive file", i can send file from phone to PC, but is a unique file. I need to start aways i to send a file from phone to pc.
With Bluetooth File Transfer is the same, him only connect with PC and send a unique file, if the program above is started.
Ty a lot
Moacir Jr.
If your saying that you are trying to access the phone like a windows network share, you need to go to bluetooth file transfer and turn on the Sharing Service (FTP).
EDIT: Forget what I said, since you are using fsquirt.exe, I assume you are using the default windows bluetooth stack. Its just simply there was no software listening for incoming transfers, hence the need to start fsquirt. Anyways, this is not a problem with the phone, in fact you should take it to a windows PC forum, as your problem has nothing to do with your phone.
I have a Lumia 710, did downgrade to Dload (asks to format drive when plugged into computer in OSBL mode), installed latest Rainbowmod, sim-unlocked, etc.. In the end however, I decided to stick with the stock 7.5 rom since it seems to be faster, so I downloaded the rom via Navifirm+, and installed it using Downloader.
Now, things are fine, except Zune is having problems connecting with the phone. It recognizes the phone, can do sync and file transfers and such, but it can't read the storage properly.
Total storage and Available storage both show 0M.
Due to this, the App Deployment tool from Microsoft does not work, because it cannot connect to the phone (It worked before the issue came up). Windows mobile center also can't connect to the phone, etc.
What is the cause to this and is there a fix?
I've recall reading somewhere about Rom/Baseband mismatch and such..
Sorry if this issue was brought up already by others, but doing forum searches didn't give back much.
Edit:
Problem fixed.
Went through the support pages on the Microsoft site, ended up downloading a program called Microsoft Fixit (MicrosoftFixit50577.msi), which basically just deletes Zune for you, then opens a webpage with the download link for Zune. Not so much of a "fix" I'd say. Anyways, it's Zune 4.8, and the package is 170mb, which is actually different compared to the one found on the XBox section, http://www.xbox.com/en-CA/Live/Partners/Zune. This one is only around 100mb in size.
However, I didn't want to download the 170mb package due to slow internet, so I just ran the old 100mb Zune package, installed it, plugged in the phone, and noticed that drivers were installed.
Everything perfect now. I guess it's still the drivers that are messed up.
I'm pretty sure I've tried re-installing Zune before and not fixing the problem. Maybe the Fixit program is a cleaner uninstall which gets rid of the drivers as well.
Note: The Fixit program complained under Windows 8 about unsupported platform, and does not do it's job. Booted up Windows 7 (dual boot is the way to go..), and it works fine.
Note2: Running the program in compatibility mode under Windows 8, the programs works OK.
Edit 2:
On my Windows8, I deleted the driver called "Nokia Phone USB" (I think), and Zune detects the storage properly now.
I had this issue.
I just went into HELP in zune software(upper right corner next to Sign In etc..)
From there i just looked for : "Computer doesn’t recognize your device on the Zune Software" - it's the 8th thing from top to bottom.
from there I just followed their steps and if that wouldn't resolve my problem,i would just hit the NO button,and they would tell you something else to try.I ended up downloading a software from them,that finally resolved my problem.
Best of luck !
If you have trouble into following that I've just said,just PM me.
You need to uninstall the drivers that came with navifirm. They prevent zune from properly interacting with your phone.
sherbibv said:
I had this issue.
I just went into HELP in zune software(upper right corner next to Sign In etc..)
From there i just looked for : "Computer doesn’t recognize your device on the Zune Software" - it's the 8th thing from top to bottom.
from there I just followed their steps and if that wouldn't resolve my problem,i would just hit the NO button,and they would tell you something else to try.I ended up downloading a software from them,that finally resolved my problem.
Best of luck !
If you have trouble into following that I've just said,just PM me.
Click to expand...
Click to collapse
Thanks for help!!
mcosmin222 said:
You need to uninstall the drivers that came with navifirm. They prevent zune from properly interacting with your phone.
Click to expand...
Click to collapse
Thanks! This fixed the problem on my Windows 8. I deleted the driver called "Nokia Phone USB", and Zune detects the storage properly now. Can't recall if the driver came from Navifirm though, can't remember.
Had the same problem on Windows 8 after upgrading my Lumia to 7.8 with Navifirm and Nokia Care Center. I uninstalled the drivers that came with Navifirm and it worked fine again
Guys / Gals
I was able to fix my problem of not being able to connect my phone, a Samsung Note 3, and the error I got was from Microsoft MTP. I believe it is Media Transport Protocol. I searched for days; this was a pain in the neck problem. iPhone users seem to have the same issue. I have seen a couple of solutions suggested here on XDA, but they did not work for me. One solution advised to remove the drivers via Windows, mine is Win 7 btw, Devices and Printers screen, they stated to make sure to check the remove driver checkbox. But MTP does not have any such checkbox that I see in my setup. Maybe we are different Windows versions or something. Regardless, what worked for me was to reinstall Windows using the Upgrade option right after you select install. This procedure does not usually damage your personal files; but like every other post here:
1- Do back up everything.
2- I am not responsible for any damaged files, computers, anything.!.!.! Ok?
I backed up my files on an external drive. The only thing I had to reinstall was VMware Workstation 11, and afterwards I was able to launch it fine. In fact I am typing this post from the Ubuntu guest within the restored Win 7. During the install I noticed Windows took some time "repairing .Net". So maybe folks who have more knowledge of Microsoft products can look into this as a quicker fix?
After you are done, test your phone's connectivity and if it is working, create a restore point as soon as the install is done since Windows is going to install a slew of updates right after. You can label restore points something like "Phone Driver Works" or anything else, which implies a successful milestone.
Send me an email if any of this is unclear. I am so glad this is fixed for me. I'll post some of the links, which helped me figure this out.