Help with 1.72WWE ROM for Orange M1000 I've created - MDA II, XDA II, 2060 ROM Development

Hi all...
Could some clever chappie confirm the modifications that I've done to the ROM below and let me know whether what I have done is correct, and that my device should be flashed withouth (too many) problems and work like a charm...
I've downloaded the iMate 1.72 ROM from here:
http://www.mtekk.com.au/browse/page423.html
I also downloaded the ROM off of the Orange UK site here:
http://web.orange.co.uk/story/sm_1047574.html
I used ER2003Edit to open the old ROM and extracted all the files from ms_.nbf to my HDD.
Using ER2003Edit, I opened up the new ms_.nbf ROM and removed:
3_networkname.CAB
I then added the following files to the new ms_.nbf ROM:
ClearTypeFonts.sa.CAB (nice ClearType fonts...!)
ClearVue233_WWE.sa.CAB
cttune.cpl.CAB
homepage_Notes_UK.CAB (not sure what this is for - any ideas?)
MIDI56.sa.CAB
Orange_network.sa.CAB
Orange_UK_customization0608.sa.CAB
OrangeUK_AP.sa.CAB
UKORGCustomize.CAB
The last four files I presume are all to do with setting the phone up with the correct settings for Orange - if not, could someone let me know what they are all for...
I didn't add one file as I thought it might be specific to the 1.66WWE ROM and that was:
MsSkinFix.sa.CAB
I have no idea what this does, but can try to guess from the filename what it does... Is this needed with the 1.72 ROM?
I also modified the startup splash screens to those of the Orange 1.66WE images.
I updated the config.txt file and is listed below:
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CameraRC132_WWE_1.5.sa.CAB
CAB: \Extended_ROM\CallerIDRC12_WWE_1.5.sa.CAB
CAB: \Extended_ROM\ClearVue233_WWE.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS1.6.0.14WWE.CAB
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\OrangeUK_AP.sa.CAB
CAB: \Extended_ROM\Version_AKU1_16600.sa.CAB
CAB: \Extended_ROM\UKORGCustomize.CAB
CAB: \Extended_ROM\frontlight_wavedev_dim.sa.CAB
CAB: \Extended_ROM\homepage_Notes_UK.CAB
CAB: \Extended_ROM\Orange_UK_customization0608.sa.CAB
CAB: \Extended_ROM\Orange_network.sa.CAB
CAB: \Extended_ROM\MsSkinFix.sa.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Right... now that's all out of the way... Could some clever person let me know the following:
1) Have I done this all correctly?
2) Will my device upgrade without any problems?
3) If I have problems, will re-flashing it again work (I had to flash mine twice when upgrading from the non-MMS ROM to the MMS enabled ROM)?
4) Is there anything else I have forgotten?
5) If all the above are ok, is anyone interested in trying out this ROM? - if so - PM me
Hopefully someone can help...

why do yu wnat to create a new ms_nbf file?
Just unhide/unlock the ExtROM and change it as you like!
I miss in you config.txt a cab named WWE......CAB. This file usually contains some settings you need.
Why didi you remove 3_networkname.cab? This file contains the correct network names of 3 operators that obviously are not in the 1.72 OS/radio ROM
If you do want to create a ms_.nbf, try to open the nbf using xda2nbf.exe
Using ER2003edit you might have corrupted the header!!!!
Use xda2nbf.exe too to update the checksum!

Could I ask you a big favour please.
Could you post on here or send direct to me the following cab file you listed in your text:
ClearTypeFonts.sa.CAB (nice ClearType fonts...!)
ClearVue233_WWE.sa.CAB
cttune.cpl.CAB
homepage_Notes_UK.CAB (not sure what this is for - any ideas?)
MIDI56.sa.CAB
Orange_network.sa.CAB
Orange_UK_customization0608.sa.CAB
OrangeUK_AP.sa.CAB
UKORGCustomize.CAB
I have lost my orange settings when upgrading.
Many thanks,
Johntheo
email address [email protected]

edsub said:
why do yu wnat to create a new ms_nbf file?
Just unhide/unlock the ExtROM and change it as you like!
Click to expand...
Click to collapse
I've currently got 1.66WWE ROM and want to upgrade to 1.72WWE - hence the need to get everything in the ms_nbf file first.
edsub said:
I miss in you config.txt a cab named WWE......CAB. This file usually contains some settings you need.
Click to expand...
Click to collapse
Sorry, I must've opened the wrong config.txt file..! Here's my updated one:
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\CallerIDB31_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraRC132_WWE_1.5.sa.CAB
CAB: \Extended_ROM\ClearTypeFonts.sa.CAB
CAB: \Extended_ROM\ClearVue233_WWE.sa.CAB
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\homepage_Notes_UK.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\MMS1.6.0.14WWE.CAB
CAB: \Extended_ROM\OEM_WWE_04042201.sa.CAB
CAB: \Extended_ROM\Orange_network.sa.CAB
CAB: \Extended_ROM\Orange_UK_customization0608.sa.CAB
CAB: \Extended_ROM\OrangeUK_AP.sa.CAB
CAB: \Extended_ROM\UKORGCustomize.CAB
CAB: \Extended_ROM\3_networkname.CAB
CAB: \Extended_ROM\Version_AKU2_172.sa.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
edsub said:
Why didi you remove 3_networkname.cab? This file contains the correct network names of 3 operators that obviously are not in the 1.72 OS/radio ROM
Click to expand...
Click to collapse
I removed it as I thought they were of no use to me as I'm using the phone in the UK... I've since added it to the ms_nbf file now.
edsub said:
If you do want to create a ms_.nbf, try to open the nbf using xda2nbf.exe
Using ER2003edit you might have corrupted the header!!!!
Use xda2nbf.exe too to update the checksum!
Click to expand...
Click to collapse
Oh right... I've not searched on people having problems with ER2003Edit but I will do.
One last thing, what might this file do (as I'd left it out from my original post)...
frontlight_wavedev_dim.sa.CAB
Thanks in advance...

XDA II keeps on Hanging
Hi
I had upgraded to i - mate 1.72 wwe rom downloaded from i mate club in the month of April 2004. Every thing worked very fine. Now my i mate has started hanging, some times even hard and cold reboot also stops responding. At this time I have to remove my battery for about 10 sec. and replace i mate hard resets. I have even purchased another battery to check if it is a battery rpob. but same things are repeated with the new battery also. Please help me in resolving my prob. :roll:
Regards
anil

Your ROM is ace!
Just realised that a load of posts from this thread are part of what got lost. I downloaded the ROM you posted and have just set it up - it works really well, thank you so much, I have wanted 1.72 for so long and I don't think Orange will ever get themselves sorted and update it themselves. Nice work Ninjadonkey, thank you for your efforts!

One more comment.
Please look at the post by dcs on avoiding future country code errors because:
You seem to have used the iMate ms_.nbf file.
This will get you into trouble with next upgrade because the device the thinks it is an iMate (country-code set to CDL), where as you will assume it is an Orange.
Regaring Ext. Rom files (ms_.nbf) its always best to use the original (in your case Orange 1.66) one and just change all the files / other contents . . .

Yep, you will get that problem if you use that ROM and want to upgrade in future.
I have created a new ROM using the method dcs documented in his post which I could upload if needed.
As far as I know, there is not going to be another ROM upgrade for our device so that might negate the need to use the new ROM I've made.

Just to check, NinjaDonkey, I noticed by checking the Extended ROM details in ERedit, that it was set to Orange, not i-mate, so does that still mean we won't be able to upgrade officially, or does that solve any country code issues? Not that I'm too bothered, I've read all dcs's stuff on sorting country code problems anyway and I'm sure I'll figure it out if I have to (in the unlikely event that Orange ever do release a 1.72 upgrade in the UK!) Thanks again for your hard work!

As you've read the post by dcs, you'll know that EREdit only sets the operator code in one place - the place where the software looks. The other one is coded into the device (don't ask me how).
I had no problems using this ROM while I had it installed (about 2-3 weeks). The only problem I did have was re-flashing with a properly edited ROM (with both provider codes set to Orange). After I got the first country code error, I set the "software" provider code to CDL then tried flashing. I got the country error code, but as stated in dcs' post, just edit the country code in the rom to Orange (with EREdit) and it flashed fine.

Out of interest, what ROM did you change to?

I changed to the O2 1.72.187 (either 187 or 181 - the one without BlackBerry).
Can't see any difference between the OS ROM from O2 and i-Mate. The only differences are in the Extended ROM as far as I can tell...

Related

trying to modify the config for WM2005, but it does work,why

I have added in this command in the 'config' file
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.sa.CAB
also inserted the file
IntelliPad_TMO_WWE_B12
so a hard reset, it just dont install.
another way, i did , is by unlocking the extended rom, and install the intellipad, it also doesnt work
how come ?
please advice

cht9000 ExtROM to 838pro ExtROM quesiton

Could someone here help me out the situation? I want to upgrade my tytn (extended rom) from the one default (cht9000) to the latest (dopod 838pro HK).. What should I do first? Do I need to erase the original one or just copy the new one to overwrite?
I have read WIKI and still confuse..
You can do it in 2 ways, choose the one you like:
Method 1:
- unhide and unlock extended rom
- delete de contents (backup first if you want)
- unzip the contents of the 838pro ExtROM to the \Extended_ROM folder
- hard reset
- 838pro Extrom will be keept after hardreset, you won't see cht9000 extrom anymore
Method 2: (no need to unhide, unlock extrom)
- hard reset
- soft reset before the cht9000 original extrom installs (3 seconds!)
- unzip the contents of the 838pro on any folder
- click on each cab to install it, you can delete them after install
- soft reset
- cht9000 extrom will be back after hardreset, you need to repeat the procedure if you want to instal 838pro extrom again.
Hope that helps
pof said:
You can do it in 2 ways, choose the one you like:
Method 1:
- unhide and unlock extended rom
- delete de contents (backup first if you want)
- unzip the contents of the 838pro ExtROM to the \Extended_ROM folder
- hard reset
- 838pro Extrom will be keept after hardreset, you won't see cht9000 extrom anymore
Method 2: (no need to unhide, unlock extrom)
- hard reset
- soft reset before the cht9000 original extrom installs (3 seconds!)
- unzip the contents of the 838pro on any folder
- click on each cab to install it, you can delete them after install
- soft reset
- cht9000 extrom will be back after hardreset, you need to repeat the procedure if you want to instal 838pro extrom again.
Hope that helps
Click to expand...
Click to collapse
Thanks man... will try the 1st method.. God bless me..!!!
I am using cht9000 also in HK. Tried the Method 1. Can unhide the ExtRom but cannot unlock it. Try many ways, even hard reset it and then installed the tweaks. Still no luck. ExtRom still un-writable. Sometimes later maybe I will try the method 2.
I'm the same can anyone help first day with Tytn, upgraded the rom and ive used hermes and cannot delete/overwrite files in Ext rom
H E L P
In some devices ExtROM unlocking doesn't work, only unhiding... if that is your case use "method 2" described avobe in this thread.
'kin ell, wish that it was mentioned in the wiki about the ext rom being locked.
Thanks for the tip, ps anyone have T-mobile settings cab inc web n walk
Thanks
Is anyone working on getting extrom unlock to work on these devices which currently do not, be majorly pleased if they are.
i used Fit4Cat Hermes Tweaker to unhide and unlock my ext rom. after that i can move or delete files from ext rom

TyTN (M3100) Extended ROM Cooking?

Hi all,
I've spent the past hour looking about here on XDA and the net to find out how to modify the Extender ROM of my M3100 to install extra programs of my choice after a hard reset. A few points to mention first.
1. I used to have a Universal and now the M3100 so I'm familiar with WM5 devices.
2. I've unlocked the Extender ROM and have full access.
3. I've tried my best to solve this before writing this post.
4. The best info is found here - http://pocketpcdubai.infopop.cc/groupee/forums/a/tpc/f/582600994/m/7891086801
So my issue. Here is the original CONFIG.TXT
LOCK:Enabled
CAB: \Extended_ROM\MT_PC_Hermes_Orange_REG_060612.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\PP_defaulthtm.CAB
CAB: \Extended_ROM\PP_Fix_ShowTodayTheme.cab
CAB: \Extended_ROM\HERMES_UK_BUILD_93_CLOCK.CAB
LOCKisabled
RST: Reset
I am only interested in adding .CABs to the install. The files I added were:
PocketPlus.arm.cab
fit4cat_Hermes_Tweaker_v1.1a.cab
tcmdpocketarm.cab
Phone_Pad.CAB
So I added the files to the Extended ROM and updated the CONFIG.TXT to:
LOCK:Enabled
CAB: \Extended_ROM\MT_PC_Hermes_Orange_REG_060612.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\PP_defaulthtm.CAB
CAB: \Extended_ROM\PP_Fix_ShowTodayTheme.cab
CAB: \Extended_ROM\HERMES_UK_BUILD_93_CLOCK.CAB
CAB: \Extended_ROM\PocketPlus.arm.cab
CAB: \Extended_ROM\fit4cat_Hermes_Tweaker_v1.1a.cab
CAB: \Extended_ROM\tcmdpocketarm.cab
CAB: \Extended_ROM\Phone_Pad.CAB
LOCKisabled
RST: Reset
After a hard reset I see the files are installed, they appear in the auto install app at the beginning but once the device has reset they are not there, not one of them! I must be doing something fundamental wrong but there is no good examples available anywhere to check my changes.
Anyone help?
Gav.
The new cabs don't install because they are not signed.
On the Universal there was a signed cab which changed the security registy setting to allow installation of unsigned cabs, so the solution was to add this cab the first one, and other unsigned cabs after this.
I tried with the universal cab on the hermes (htc tytn & dopod roms) but it didn't work
Hi Pof,
That'll explain it! Should have to worry too much as not intending to hard-reset the device often and it's quite easy to install manually.
Thanks for the info.
Gav.

Orange M3100 and soft after Hard Reset

Hi all, and congratulations for this forum.
One thing i observe when i hard reset my orange m3100 is that not only install soft from extended rom when i hard reset, but install soft from other site, cause install a couples of times. First install one amount of pieces of soft, that includes MMS composer and other things, and then, with the pop up window, install all from extended memory.
Is like use ROM from install same software, and after that, delete from ROM.
Anyone have this CABs?
Can i put all the CABs in extended memory and bypass the soft install after hard reset?
Thanks in advance.
If you have the original orange rom, then all the customisation cabs are in extended memory and it installs them one after the other - there are four I think.
If you hard reset and then sfot reset before the customisation starts, it will not load the orange cabs - but you wont have the MMS, data connections etc and will need to manually enter these. It is easy to unlock the extended rom though and run individual cabs.
I think what he is trying to say is something that i also noticed.
When it does the customization it runs some cabs that are not in the ext rom. The first block that it does as stored somewhere else.
Check the preautorun / preconfig stuff in \windows folder.
Thanks
Hi again.
Thanks for your interest and answers.
Well, Des makes me take a look at \Windows folder and find this...
One file PreConfig.txt with next content:
LOCK:Enabled
EXEC:\Windows\SetAcousticParam.exe /Run
EXEC:\Windows\SetHSDPA.exe /Disable
CAB: \Windows\MP_CVSDcpl_20060503.cab
CAB: \Windows\MP_DRMfilesave_ESN_060329.CAB
CAB: \Windows\MP_IMGSave_ESN_060329.CAB
CAB: \Windows\MP_MMS3.2_Amena_Hermes_060818.CAB
CAB: \Windows\MP_Ringtone_Hermes_ESN_060328.CAB
XML: \Windows\PP_Connection.xml
XML: \Windows\PP_Generic_UI_ORAmena_Hermes.xml
XML: \Windows\PP_OtherConn_ORAmena_Hermes.xml
XML: \Windows\PP_UXC_ORAmena_Hermes.xml
XML: \Windows\PT_Remove_ModemLNK.xml
EXEC:\Windows\cusTSK.exe \Windows\Orange2006.tsk
Hide:Enabled
EXEC:\Extended_ROM\autorun.exe
LOCKisabled
RST: Reset
This means that two instalations procces take place after hard reset, am i ok?
the first one from \windows folder and second one from extended.
One interesting question is that this file remains in \windows folder after instalation, so one posibility is to move this to extended and liberate space in main storage, am i right? if so, how can i do that?
Thanks again, i read a lot in XDA forum and learn so much.

unlocked extended rom own cab install after hard reset

Hi people..
because this is my first topic-post, I just wanna say, GREAT SITE!!!
ok..back to my question (btw I need alot to learn when it comes to tweaking wm5 /ppc, so srry if i sound dum, not that I am but ok..whatever.. owyeah..if my English is bad..srry im just a dutch ass guy)
ok..
I unlocked my extended rom (thx to this site) and I thought..what if I just trew some .cab 's in my extended rom, edit the config.txt, hard reset and violá, the programs are installed automatically..but unfortunately it didn't work.. (no im not a script kiddy..I did for about 1,5 year an computer study (in NL it calls a ICT-study) *Btw..I did get my diploma) Back to the point *i talk to much, I guess..LOL*
This is a example of my config.txt
Code:
LOCK:Enabled
SHOW:\Windows\TMO_WallPaper.bmp
CAB: \Extended_ROM\Windows_live.CAB
CAB: \Extended_ROM\HTC_X-Button.CAB
CAB: \Extended_ROM\rescoexplorer_p.ARM.CAB
CAB: \Extended_ROM\extendedromunlocker.cab
CAB: \Extended_ROM\MT_PC_Hermes_TMO_REG_060612.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\P_TMNL_UXC.CAB
CAB: \Extended_ROM\PP_TMNL-BrowserSetting_HER_11511401.CAB
CAB: \Extended_ROM\P_BT_EarphonesList.CAB
CAB: \Extended_ROM\P_rilgsm_patch.CAB
CAB: \Extended_ROM\Patch_RTPlugInEx2.CAB
CAB: \Extended_ROM\XDA HTCHomePlug 1.6.0.0.cab
CAB: \Extended_ROM\XDA CommManager 1.3.6.0.cab
CAB: \Extended_ROM\XDA SIM Manager 5.30.cab
LOCK:Disabled
RST: Reset
What I want is; when I hard reset my ppc (and I put some of my own CAB. 's in the extended rom) I want those programs to install automatically..
so if you have any suggestions, please post them..
thq
Bram87 said:
Hi people..
because this is my first topic-post, I just wanna say, GREAT SITE!!!
ok..back to my question (btw I need alot to learn when it comes to tweaking wm5 /ppc, so srry if i sound dum, not that I am but ok..whatever.. owyeah..if my English is bad..srry im just a dutch ass guy)
ok..
I unlocked my extended rom (thx to this site) and I thought..what if I just trew some .cab 's in my extended rom, edit the config.txt, hard reset and violá, the programs are installed automatically..but unfortunately it didn't work.. (no im not a script kiddy..I did for about 1,5 year an computer study (in NL it calls a ICT-study) *Btw..I did get my diploma) Back to the point *i talk to much, I guess..LOL*
This is a example of my config.txt
Code:
LOCK:Enabled
SHOW:\Windows\TMO_WallPaper.bmp
CAB: \Extended_ROM\Windows_live.CAB
CAB: \Extended_ROM\HTC_X-Button.CAB
CAB: \Extended_ROM\rescoexplorer_p.ARM.CAB
CAB: \Extended_ROM\extendedromunlocker.cab
CAB: \Extended_ROM\MT_PC_Hermes_TMO_REG_060612.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
CAB: \Extended_ROM\P_TMNL_UXC.CAB
CAB: \Extended_ROM\PP_TMNL-BrowserSetting_HER_11511401.CAB
CAB: \Extended_ROM\P_BT_EarphonesList.CAB
CAB: \Extended_ROM\P_rilgsm_patch.CAB
CAB: \Extended_ROM\Patch_RTPlugInEx2.CAB
CAB: \Extended_ROM\XDA HTCHomePlug 1.6.0.0.cab
CAB: \Extended_ROM\XDA CommManager 1.3.6.0.cab
CAB: \Extended_ROM\XDA SIM Manager 5.30.cab
LOCK:Disabled
RST: Reset
What I want is; when I hard reset my ppc (and I put some of my own CAB. 's in the extended rom) I want those programs to install automatically..
so if you have any suggestions, please post them..
thq
Click to expand...
Click to collapse
First the CAB must be SIGNED.
Also the ROM must have the autorun.exe feature to tell it to run on HR, also some have a preconfig run cooked into the actual OS ROM too.
you need to cook your OS rom (or flash a cooked OS which already does this) to allow non-signed CAB files to be installed.
extrom
Hi there,
i have an other problem, my hermes did a hard reset (after playing with Sktools) ,and the bad thing is that i took all the cabs out of the extrom to free space and install other.
Now, after using V3a unlocker and the cab mountAllExtom, i see the ext rom
and can erase progs in it but the memory remains in use . i only have 0.84 M free .
can someone help me to recover all that precious space
Thank you
Thierry
Belgium
First the CAB must be SIGNED.
Click to expand...
Click to collapse
sorry to raised these questions as im new i have the same prob, but how do we SIGNED the CAB? is it using the Device Security Manager from Microsoft? btw, what is the use of sdkcerts.cab?

Categories

Resources