speaker only works now and again - MDA, XDA, 1010 General

has anyone had this problem? and how is it resolved? It works now and again and i've tried a hard reset to no joy.
Any help will be greatly appreciated as i love my xda and dont wanna have to buy a new one.
Regards,
Darragh

Hello, I'm not quite sure I understand your post.
Does your speaker sometimes fail?
If that's the case, it could be that the headphone jack is failing and some have reported that inserting the headset several times dislodges the internal switch so the speaker returns to normal.
Or, it could be that the speaker loosen a little so the contacts fail. If so, please follow my tutorial. (My model is a MDA2, XDA2).
Follow this link to the tutorial.
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=i+fixed
Best regards,
Rayan

Yes, try inserting and removing the headset a few times. Sometimes a little squirt of switch gear after will keep it from sticking.

Related

PLEASE HELP! No sound with phone - mic and spkr don't work!!

I posted this over at PPCPassion too, and someone suggested I try here...just really looking for help. Here's what happened. I woke up, and my phone (TMo XDA with PPCTechs 64MB upgrade, 128SD card), which had been left on all night, doesn't work as follows:
-When I dial a call, I can't hear the other phone ringing through the speaker...and when the person answers, I can't hear them...nor can they hear me. The phone indicates 'Dialing' and then the duration time starts when they answer
-When I get a call, my phone rings, but when I answer, same as above, they can't hear me and I don't hear them
-But the speaker and mic DO work...I tested this using a voice memo.
-Also, same symptoms whether using spkr phone on or off
Any thoughts on this? It 'fixed itself' yesterday after I performed a back up (I was going to do a hard reset/restore). THen today same problem. Did the backup just to see if somehow that solved it, but this time it's not working. Before I do the hard reset I want to see if anyone else has any thoughts.
I really dont want to have to send this to TMo since my unit has 64MB from the upgrade...
Any help would be greatly appreciated. FWIW I'm not a developer so if you recommend technical things please explain them thoroughly :0
And THANK YOU in advance!
TM
Had the same thing happen to me. Thought of hardware failure at first, tried similar things and came to similar conclusions. Tried SD Backup, then hard reset. Not solved. Înteresting that during backup one dll file seemed to be stuck (think it was a dll, although dont remember name).
In my case solved itself when I remapped the RECORD action to the left button. Very strange......
Any permanent solution or reason would be welcome....
Phil
How did you go - the symptoms are the same as dropping pin 19 to ground (for a car kit), you lose speaker and built in mic so make sure 19 isn,t shorting with 18, Steve
Speaker & Microphone not working
I encounterd the same problem - from one day to the other mic and speaker stopped working. When I connect power to the device using a USB sync cable mic and speaker are turned on again. It really seems that the XDA is set into car mode. :?
Assuming that pins 18/19 were shorted, I have cleaned the connector but this didn't help.
There's another thing which has happened to people: it appears the connector for the headphones isn't all that sturdy, so after a while the device thinks the connector always stays in. Not sure that would explain this behaviour, but just thought I'd mention it.
Same problem happened to me... help
How do you solve this problem? I have tried to plug and unplug the headset and did a reset... still the only thing that comes out of the speaker is the ring. The only want I can use the phone or hear anything is to use the hands free... Please help.
Re: Same problem happened to me... help
adboom said:
How do you solve this problem? I have tried to plug and unplug the headset and did a reset... still the only thing that comes out of the speaker is the ring. The only want I can use the phone or hear anything is to use the hands free... Please help.
Click to expand...
Click to collapse
Fortunately, my device was still under warranty. I had to return it to O2.
Headphone Mode?
XDA developer Peter Poelman said:
There's another thing which has happened to people: it appears the connector for the headphones isn't all that sturdy, so after a while the device thinks the connector always stays in. Not sure that would explain this behaviour, but just thought I'd mention it.
Click to expand...
Click to collapse
Hi
My Qtek seems to be similarly stuck in the headphone mode. Any idea how to get out of it? Would removing the headphone socket entirely help?
Sands

Sound is busted!!!

Before anybody says use the search......
I have used it, but did not turn up anything on this although I am sure its here somewhere
I plugged in the wrong cable into my XDA a while ago (Medion PDA car cable)
This blew the fuse in the lighter fitting on the cable.....but......
Ever since this happened, my XDA is broke. I can use it as a Pocket PC. I can use it for email and internet but I cannot use it for phone calls.
The unit seems like it is constantly on speakerphone or handsfree. I try making a call and can hear nothing, either thru the handsfree speaker OR thru the main ear speaker. Whoever I call cannot her me either!
Then, I tried the headest in it. Now...I can hear the call, but whoever I call cannot hear anything!
Is this a hardware problem or a software problem???
Its really annoying me as the XDA itself is in great condition but just won't work
Try inderting and removing the headset several times or poke a cocktail stick making sure it doesnt break, this is a known problem with xda and headphone socket, it becomes jammed in closed position. I have also used a spray can of "switchgear", this is a lubricant for switches and other electronic things.
wow! that was a quick reply
thanks a lot
i have tried that but still no luck. i also tried the cocktail stick.
i'll get a can of oil in the morning like wd40 or something as you descibe.
in the meantime any more suggestions are welcome
Same Problem!
Hey, I am having the exact same problem with my Qtek 1010.. everytime i try use the phone it stays permanently on speakerphone and i can't hear anything... did u ever manage to fix the problem? thanks alot
No.
I never did have any success with it after. Ended up scrapping it
try blowing hard on the audio jack
been battling with this all day...
what fixed it is pluggin/unplugging the headset several times then removing the wired headset plug and blowing real hard inside the jack hole where u plug ur headset...common problem it seems, due to a hardware switch inside being stuck fooling the phone to think your headset is plugged wheb it is not.don't know if the rom can "sensitize" the phone to this problem i.e. make it more prone...

Speaker no sound

Hi,
the speaker dosn't work anymore. But the strange thing is, that it is working in the bootstrap selftest.
Any help welcome
cu
Mal
Hey folks,
isn't there anybody who can help me?
cu
Jürgen
You could do a complete backup, then hard reset then see if it works.
It is probably due to a bad contact in your phone headset jack. Try plugging in your headset to check if your phone or pda works with the headset. If so, then try plugging-in and unplugging the headset plug to switch the jack connections back to the speaker. If this does not work try putting a drop of WD40 on the end of the headset plug and insert it in the jack a couple of times. (Do not spray directly into the jack). It might just clean up the contacts and get the sound back to the speaker. If all this fails, you may need to open up the phone to fix the jack.
I hope that you do not have to do the latter.
Best of Luck
hi all,
nothing of this worked.
But the Speaker works in the boot-menu Hardware-Test
ah
Hi mate. I've just had the same problem as you, tried repeatedly inserting and removing the jack - no luck. Used WD40 on the jack - no luck. Resigned to taking it to bits I removed the battery cover and noticed the little gap which leads through to a gold-looking connector by the headphone socket. I stuck my stylus in there and gave it a big wiggle and hey presto! Sound returned. Give it a go, you never know. Hope you get as lucky as I did.
Ant
Mal,
It seems that your problem is not a hardware one because your speaker actually works on boot-up. Do a search on this forum using the keyword "sound". There are a couple of posts on Aug 21, from other people having the same problem and one of them managed to get sound back by reverting to an earlier version of a software that was causing the problem.
Maybe you have a similar kind of problem.
Pat
Hi,
do you have a link to the topic. I only found articles to sound problems of the XDA-II.
thanx
MAL

Urgent! Pls help me, no sound on XDA II

Dear all,
Please help me out. My bro brought a second hand XDAII and when I upgraded his rom to WM2005, there has been NO whatsoever SOUND on his XDAII. The touch screen, phone calls, and any other sounds are totally mute (without any further software installation). My guess is that I had messed up something with the registry or with the system files. Any1 knows how to check this out?
BTW, I have been up-downgrading between different ROM versions and nothing helps!
Please, any kind souls, help me before my bro starts choking me to death.
Thank you in advance
Ken
Any audio coming from headset when plugged in??
cruisin-thru said:
Any audio coming from headset when plugged in??
Click to expand...
Click to collapse
Dear,
Yeah, that's strange, when the headset is plugged in, all the audio comes back to life again. Why is that?
Try inserting the headset and pulling it out sharply a few times, I think maybe the socket is stuck in headset mode, I may be wrong but it might be the answer.
It still doesn't work
I've tried that a few times, but it still doesn't work
Thank you anyway.
BTW, any other possible solutions to this
Thanks in advance
Ken
Finally it's resolved
Thanks to cruisin-thru, I finally managed my XDA to play audio sound. My trick was exaclty like what cruisin-thru suggested, except for that I did a little twist when I inserted the headphone into the socket :lol:
Now that I am assured it is hardware-related problem, I will try my best to have it exchanged for other device
Thank you cruisin-thru.
Ken
I've same problem but audio function just Mute (not after upgrade)
I do all Softreset and Hardreset not thing change
The finaly I do and the all audio came back is "Remove Battery" :wink:
from device then put it back.
Ake

Headphone jack not working

Hi,
Im wondering if someone can help!
I use my headphone jack everyday.
Today the headphone stopped working. Initially I thought it was the headphone so i tried 2 other pairs. Nothing. Cannot hear anything. I play music from the speaker and that works fine. But as soon as i plug in I dont hear anything.
Searching through the other threads, I found lint mentioned. So i blew in the jack and also tried to a pin. It appears to be clean.
Using an app I selected for a wired headset to be the only output. Now, when music is playing and when I putting in/pulling out the headphones in I can hear a crackling noise but nothing else. When turned up fully there is also some static!
Ive reset my phone so I know its probably not a software issue.
Any ideas please?
1. Try to hold the audio jack to one side (that is, press it either left or right) to make it slant on a side. Check if you get any sound.
2. Try seeing if you hear music by inserting the audio jack at various "depth" into the phone. i.e. don't insert it fully.
Hope it helps
thearcher4 said:
1. Try to hold the audio jack to one side (that is, press it either left or right) to make it slant on a side. Check if you get any sound.
2. Try seeing if you hear music by inserting the audio jack at various "depth" into the phone. i.e. don't insert it fully.
Hope it helps
Click to expand...
Click to collapse
tried both..but nothing!
you tried the other solutions from the forum? corrosion problem, etc? That's the best I can help. Otherwise, you might need to change the audio board, it's available on ebay I think for < $10, and apparently not so difficult to replace as well.
Let's check it with a torch. I also had this issue and it was not so easy but I managed to remove a little lint with a needle. After that it worked fine for me.
Hi,
This has now been resolved. It turned out there was another bit of lint I had missed. So using a needle, I took it out and the headphone is now back to its best.
Thank you all for your help!
Glad for you!

Categories

Resources