Related
Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
...Details are best left private, but the unit was one of the first Atoms to be released. it has been upgraded to the Jan rom, and then left alone because its owner was, uh, more chicken than I am. The Mini I used to own will be going to someone else. >_>
I will miss Bigstorage, a small price to pay for (somewhat) limited Wifi and no longer having to fear losing all my data to a power out.
Few questions here:
1. Is it safe to use the Xda-Atom-Exec-ENG-20060721-MOT0822.exe from the FTP yet?
2. Should I use that or the Xda-Atom-ENG-20060426-MOT0822.exe ?
3. Is there a way to disable the message that refuses to run unsigned exes, or is there an exe signer anywhere? I remember it having problems with programs that don't need installation.
Thanks in advance.
...Just got it today.
Apparently it's been through the service centre once, so it's ROM turned out to be the 20060426 one - radio still at RS*49. Still wondering if I should flash for the new radio driver.
I've read through the forums and I think I won't be messing around with the Exec rom for now.
Thanks, all.
i currently using the Atom with Atom Exec ROM version Xda-Atom-Exec-ENG-20060721-MOT0822
and so far until now, no prob at all..
anyone know how to cook WM5 ROM in atom,
cause, i see to other forum, they have the ROM WM5 AKU3.5 into their device,,
why can we (atom) have that to??
Ehehehehehe. Finally took the risk, nearly lost my phone - tho it was easily fixed by flashing over with the same Exec rom again. The ROM I grabbed from the FTP right here on xdadev. <_<
See, a funny thing happened.
I installed the Extrom revealer hack for extra space.
Then I installed SKTools Trial 3.0.75 - and thereafter the Extrom revealer hack stopped working.
So my device asked me this question - "Do you want to format your Storage Card so it's easily readable?"
not wanting to get my 2gig eaten, I removed it, and tried to click NO... only I accidentially touched "Yes".
Whoops.
Everything just stopped working - well, except the phone and basic winDOS mobile 5 apps.
Soft reset - device took ages to boot. Nothing that isn't WM5 native runs.
Hard reset - device went wonky, still booted, but screen got out of alignment. Still usable, but autoconfig not working (detected Sim as jumble of numbers, but phone still works).
Went into device settings -> system info.
Guess what I saw:
CMOS: NULL (WTF)
ExtROM: NULL (WTF)
...correct
...correct
...correct
And upon looking at the Flash Size, I saw 192MB (?!). Fake number?
(No screenshots will be made avaliable. I will NOT do this again.)
Anyways, a reflash put the unit back in full working condition, problem, but I'm still seeing it report that I have 192MB of Flash RAM avaliable. Oy.
Still workink for now, but I hope this won't mess up the system any. -.-
Ok, I'm not sure if my phone is bricked or not, because it doesn't seem to fit in any of the categories described. A few months ago I installed hard-spl 2.10, then installed wm6. I used this for awhile and found it unstable and upgraded to the new build yesterday. Everything went fine (i had to recover the installation once) but then I found the new version still to be too unstable for me.
To make a long story short I downloaded the official htc wm5 release and tried to revert. That fails at 12%, when I try to install the wm6 it fails at 11%. Obviously my phone now just goes to the bootloader screen and will not accept any rom updates. I'm running bootloader 1.04. Any ideas?
The exact same thing happened to me. I haven't a clue what's going on. I'm using the official HTC WM6. Same IPL, SPL is 1.40.Olipro
I actually just found this : http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
I followed the steps exactly and miraculously it worked! I'm definitely going to wait until the official release comes out before I try upgrading to wm6 again!
Actually its messed up still, no gsm
Did you try upgrading again to WM6?
I reset the sim and the gps started working again
Hi all
I've upgraded my touch dual to WM 6.1 chinese official but now the bluetooth chip is not recognized, like the device has bo BT.
I have installed hardspl 1.15 before upgrade to this, is correct?
i've tryed also to restore the original SPL 1.16 and reflash, but no BT again.
I've flashed the original radio 1.58 and the original WM6 TIM branded ita version, but no BT again.
anyone could help me?
tnx a lot!
This ROM needs at minimum the integrated 1.65 Radio! After flashing the ROM, make a hardreset and report back!
the chinese version has radio incorporated in nbh, wich is version 1.65.29.22 (i can see on the startup screen).
of course i have hard reset the device after the first boot (red + green key and reset)
i've tryed the non asia version, RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe, hard reset but no BT again :-(
That's really strange!
I'm sorry but at this point I think I can't help you!
man, i think that i've found the issue.
today i decided to open my nike. Removed the screw and the bottom cover, i've found a scew attached to the speaker, wich has destroyed it (in effect, after a repair from htc, the sound was really bad) and this screw touched with the top metal on the bluetooth board, so, i think that some short circuit have destroyed my bluetooth.
And this is HTC FAULT!!!!
now i have to send back to repair and wait another 3 weeks.