I would like to add the fonix voicedial application to my XDA2. I noted on the "my-xda.com" website that this application is supposed to be on the companion CD that comes with a XDA2.
Not mine!, purchased just 2 weeks ago.
My CD version is V1.0 sept 2003
Can anybody tell me if there is a later release that has it on please.
Can't see anywhere on the O2 websites where to download it.
Any suggestions would be greatly appreciated.
Regards
Chris
You can dowmload AppsuiteXdaII.zip from here.
You can dowmload AppsuiteXdaII.zip from here
Click to expand...
Click to collapse
Thanks I updated rom and installed the applications, works a treat.
Just got to re-install tomtom.
Thanks again
Chris
Two questions :
- Is it free ?
- Does it work on Qtec and T-Mobile MDA too ? (the app_suite_.exe i mean )
Yes its free,
I would assume it would work providing you are running the updated Rom.
I had to update to 1.72.00 WWE, before I could install the appsuite.
Good luck
Chris
That's weird, I'm running on 1.72.00WWE and it does not let me install...
Any ideas?
Rayan, did you try installing to a bare configuration, ie before restore?
It is not the OS version that counts (although it probably would have to be 1.72.00WWE) , but the extrom version (1.72.181 / 1.72.187). but i don't know which registry entries are important for this validation.
Doing a restore after upgrade does overwrite the registry (like cruisin implied).
Can anyone post the individual cabs inside this application suite?
I can have a look to make it more "ExtROM version independent"
(ie that it will also work with my 1.72.902 ROM)
I tried to create the myself from the appsuite.
Fonix cab seems to be faulty. Any experience with this?
Couldn't it be possible to just install the Fonix Voicedial on just any rom available?
That shouldn't be a problem is it?
edsub said:
Can anyone post the individual cabs inside this application suite?
I can have a look to make it more "ExtROM version independent"
(ie that it will also work with my 1.72.902 ROM)
I tried to create the myself from the appsuite.
Fonix cab seems to be faulty. Any experience with this?
Click to expand...
Click to collapse
I am not able to install any of this software.... Please Edsub maybe you can do something...
I am more than happy to sort this out, BUT: I need to get hold of a correct Fonix cab file. The one in the posted app. suite is faulty and cannot be used.
ah, logging on helps.
Thanks superperry.
i will have a look at the cabs.
bollocks!
The Fonix cab you posted is faulty too.
The cab identifies as a ZIP cabinet, instead of a WinCE Cabinet.
Also WinCE Cab manager is not able to open it, just crashes. Same as with my copy of the Fonix cab.
The other two cabs are fine.
Just by looking at the TrueFax cab I bet the version checking is doen via a new setup.dll. This should be do-able. Plz have a little patience as I do have a real job to do too . . .
edsub said:
bollocks!
The Fonix cab you posted is faulty too.
The cab identifies as a ZIP cabinet, instead of a WinCE Cabinet.
Also WinCE Cab manager is not able to open it, just crashes. Same as with my copy of the Fonix cab.
The other two cabs are fine.
Just by looking at the TrueFax cab I bet the version checking is doen via a new setup.dll. This should be do-able. Plz have a little patience as I do have a real job to do too . . .
Click to expand...
Click to collapse
:twisted: I guess they gave us faulty file, huh! :!:
Don't worry edsub, we can wait. :wink:
This is the file downloaded directly from O2.
Thanks dcs, the file you posted is exactly the same as the one I extracted the cabs from . . .
Did ANYONE try to get the Fonix Voicedial to run on their Himalaya??
What happened?
Did the install on the Himalaya run?
Did the app itself run?
Any error messages?
This Fonix cab is something different from all the other cabs I know of.
BTW: dcs, did you get Fonix installed (you seem to have a new 1.72.187 rom version on O2)??
edsub said:
BTW: dcs, did you get Fonix installed (you seem to have a new 1.72.187 rom version on O2)??
Click to expand...
Click to collapse
Yes I did. It runs, but haven't done much with it yet.
mmm, I guess we have to conclude that O2 (or Fonix) have found themselves a new method of installing software on the Himalaya . . .
@dcs: Do you remember whether the install ran as silent as other (normal) installs on the Himalaya? Did you see the zip-manager get used for installing (I ask this because the Fonix cab shows up like a zip-type of cab, instead of like a WinCE cab)
Related
I have installed the T-mobile 1.72 Beta ROM update on my O2 XDA. Everything has installed just fine and it appears to be working great. The addition of the Fax module is really welcome although a little buggy has allowed me to send a number of faxes.
The BT stack now gives me an extra option on my Widcom BT software on my desktop pc. It seems much more stable than the O2 stack.
My only problem is that all my MMS, SMS, GPRS and WAP settings are for T-Mobile UK and not O2 Ireland. I have tried to enter them manually with little success.
After reading through some of the other threads would it be possible to take the relevant cab files from an O2 1.60 (latest ROM) Extended ROM and copy them onto my PDA and then run them to install the settings? I also miss the O2 Active screen and would like to install that as well. If this is possible could and please tell me that it is!!!! Would someone be kind enough to send me the relevant Cab files?
Many thanks in advance for any help or advice.
Paul
I think its posted on this thread:
http://forum.xda-developers.com/viewtopic.php?t=8515
On page 2. There is a modified extendend rom.
Thanks for the mail
I have downloaded the extended ROM that you mentioned but it seems to just contain the T-Mobile stuff. I would like a copy of the O2 Extended ROM if possible and just install the O2 settings and Active.
Thanks
Paul
If you have an old backup, you can replace that with the new one you have now. And then runt the desired CAB files (Camera, mms, andsoon) from the new 1.72 upgrade.
Here you go mate...
Attached is a ZIP file, containing a folder.
In it, are ALL the O2 files found in an O2 Extended ROM, as per 1.60.00 ROM Upgrade, O2 WWE.
I am not sure exactly which CAB is the settings file (can anyone tell me what the GPRS settings file CAB is called in an extended ROM), so you will have to find it yourself.
It also includes the O2 Active stuff.
Hope it helps.
Download it quick, becuase I'm not sure the legalities of posting it here, and also its a big file, so using up a lot of my space, so I wanna delete it soon.
Thanks
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Re: Thanks
Pastor said:
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Click to expand...
Click to collapse
Er, you've totally lost me mate.
For the Unlocker, all I do, is copy the cab file for it over to my XDA2, then use File Manager on the XDA2 to locate the file, and click to run.
This installs it.
Then, if you go into programs, there is a new folder, next to games, for the extRom tools.
Open that, and you can hide/unhide, and lock/unlock the extended ROM.
It sometimes requires a soft reboot.
When it is unlcoked and unhidden, you can simply delete all files in it, and copy the whole O2 folder contents into it that I posted.
Then, after a hard reset, it will install all the programs in the extended rom.
Not sure what all these 'argument' things are you mention mate, sorry.
Sorted!!!
Did not see the programme group had been using the application via the file explorer and it was asking for "arguments". Thanks for the help.
Paul
Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
Hello!
Is there any method of accessing internet from a PC *though* Wallaby's GPRS? As I could undestend a Wallaby device is intended to connect to internet through PC when it is connected to it, or through the GPRS when it separated. And I would like to use GPRS as internet source for my PC - is that possible?!!
Waiting for your answers...
Thanks in advance
Yaroslav Novytskyy
Some ROMS do have a wireless modem integrated. I think with this tool you can do that.
It will act as a normal modem, you can use with your PC....
Stefan
How can I check if this my case? and how to use it? any docs, manuals, links? please...
An overview which rom includes the wmodem application could be found here:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
There have been some instructions about the wmodem from o2, but i never read them through... ;-)
Stefan
There is no WM2003SE with wmodem And I have already installed a WM2003SE from your kitchen and was so happy, that I've made it Now I will have to downgrade (p.s. is that painless? from WM2003SE to WM2003? ) Those download links from the page, you have shown abow, do not wokrk As far as I can understand - those are clean ROMs...
And one more thing: as I've mentioned, I've cooked a WM2003SE based ROM, but with some additional apps (selected while cooking) and they did not install... for example there is a plugin for MSMoney on today screen, but when clicking it, it says "error opening or locating target filename"... same with AgileMessanger and lots of others intended to be installed (but some were still installed)... Why is that? Now I think it would be better to install a "cleen" system and then to add what I do need....
Thanx for your answers.... waiting for more I do need them
pleeeeeeeeeeeeeeeease ^^^^^^^^^^^^^^^^^^^^
ynovytskyy said:
There is no WM2003SE with wmodem And I have already installed a WM2003SE from your kitchen and was so happy, that I've made it Now I will have to downgrade (p.s. is that painless? from WM2003SE to WM2003? ) Those download links from the page, you have shown abow, do not wokrk As far as I can understand - those are clean ROMs...
Click to expand...
Click to collapse
Just tried it in the moment. Downloading worked for me fine.... You can also use a normal ftp-client to access the server and download the file(s)....
ynovytskyy said:
And one more thing: as I've mentioned, I've cooked a WM2003SE based ROM, but with some additional apps (selected while cooking) and they did not install... for example there is a plugin for MSMoney on today screen, but when clicking it, it says "error opening or locating target filename"... same with AgileMessanger and lots of others intended to be installed (but some were still installed)... Why is that? Now I think it would be better to install a "cleen" system and then to add what I do need....
Click to expand...
Click to collapse
That's very courius. But i've also to say, the Wm2003SE was not so "hard tested" than the other cooking process....
There are many Users out htere sing a cooked ROM (most use Wm2003) without any Problem. So i think you don not have to use a clean ROM for your installtion....
Stefan
Hi there- I inherited an SX56- but can't seem to download new proggies to it! Not too sure if it has PC2002 or 2003, but i can tell you it has:
ROM Version 3.17.03 ENG
Radio: A.20.10
I tried using installing ActiveSync- but I guess I need a serial key or something.
Since I couldn't find a post on how to build with current updates- can someone reply or re-direct to a post that lists what I need to make this baby current so I can install some of the cool utilities for this PDA?
Thanks again!
PS: Im running XDA-developers SW on this baby!
activesync can be freely downloaded from ms's site
and require not serial
if it ask for code when you connect your pda it's the pda's
user set code it wants
ok- got the latest active sync- 4.5 build. I still can't seem to successfully run .msi files or .cab files to and from the sx56. I tried dropping the .cab files to different directories- since its probably looking for PPC2002 files as well to run the program. I also downloaded CNET framework v2.0.2...still can't seem to install programs onto the pocket PC
any ideas?
Cheers!
i think msi files was ment to run from the pc not the ppc