Related
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
Can anyone share with us information on version 1.72 for XDA2: features, benefits, pros, cons... ?
Is worth upgrading from O2 1.60 ?
thanks
There are allready many threads on this.
But to conclude:
If you don't have any issues with your current version: stay with it.
You might consider 1.72 (the Qtek or iMate versions, NOT the T-Mobile beta) especially when:
1. You need certain Bluetooth options (ie serial port protocol) and don't want to mess around with hacks or extra 'tools'
2. Battery life is important
For me these points were enough to DO the upgrade (coming from 1.63 T-Mobile NL). And very happy with it.
Keep in mind that (unless you find a 1.72 from your own operator) you will have quite some work with getting all the customisations right.
One of these days I will post a good working set (no issues in a month holiday!!) of customisations to be used as a an extended rom for T-Mobile NL
i'm currently using the T-Mobile ROM v1.72WWE had no problem with it. the batt life was improved noticeably. I was using the O2 ROM v1.66WWE
as for my bluetooth i'm using the widcomm BT-PPC/PE v1.0.0 build 1400. no problems with it except that it turns off whenever i set my phone to standby mode.
downlaod
i have a qtek 2020 with rom 1.66 and it is doing a lot of problem which version is better and where can i download it
1.72 ROM Editing the Connectivity
Hi, I am v happy with the 1.72 ROM... I have successfully added my local GPRS setting for my operator.
but ... I can't edit my ISP GPRS settings.
In the select network, edit My ISP, the existing connections doesn't show up to allow me to edit the settings. No exisiting connection to "tap" on!?
please help!!
1.72 ROM
i have 'salad rom' with asian flavour(Included 'auto configuration' & 'o2 connect) and happy with it.
rom 1.72WWE, radio 1.17, ext.rom 1.72.900 (main rom by Qteq, radio by T-mobile, ext.rom by edsubsoft).
untill now ;
phone, gprs, activesync, run program, MS BT stack, sms, mms ........are running well. (maybe i am lucky with it)
keep to my salad untill SE come out.
---------------
many thanks to [Krueger] Dr. Stein, mamaich, itsme, edsub...
you are great man.
Most of the post regarding ROM Salads and customizations are beyond what I wish to perform on my device. To dat I have only loaded T-Mobile ROM upgrades that required nothing more than loading them automatically. I currently have the T-Mobile U7K Beta on my MDA II.
Can someone please explain the following:
1. Is there another T-Mobile 1.72 WWE available that I can load, non-beta?
2. I see other Custom ROMs on this site that state T-Mobile. Can I simply load those automatically or will I have to get into country ID, .nbf files, etc?
Ed
Official T-Mobile
Hi. Gratefuled
maybe this can help you : :?: :?:
http://forum.xda-developers.com/viewtopic.php?t=11169
ajong,
Thanks for the link. I have looked at that page/thread, but I think what I want is still not available.
I'm looking for an official T-Mobile 1.72 ROM, si I can get rid of the 1.72 Beta, or I'm looking for someone's custom ROM that I can load just like I could an official one. In other wors the custom I suppose would be ok, but I do not want to mess around with opeing the ROM and disecting and changing certain settings. Like I say, it just may not be out there.
Upgrading my ROM...HELP for newbie
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
I am planning of upgrading my unit to 1.72 but don't know where to start. Have downloaded a couple of 1.72ROM upgrade but don't know how it goes. Can Anyone help me step by step re: this procedure....
Presently in Manila with Smart as my provider,
Thank you in advance....
Ronnie
Upgrading my ROM...HELP for newbie
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
I am planning of upgrading my unit to 1.72 but don't know where to start. Have downloaded a couple of 1.72ROM upgrade but don't know how it goes. Can Anyone help me step by step re: this procedure....
Presently in Manila with Smart as my provider,
Thank you in advance....
Ronnie
I HAVE NO IDEA
Rontess wrote:
Hi. I have been reading a lot of the posts re: upgrading and modifying but still at a lost on how to upgrade my unit. Presently I have a ROM version 1.66 WWE radio version : 1.08 and ext rom ver 1.66.165.
Sorry rontess, :?: :?:
I have no idea about your ROM (bootloader 1.06, am i alright??)
My friends in Jakarta said A LOT of problem about this device if upgrade to 1.72 ROM !!!
They want to sell it !!!
i hope you are lucky with your device.
maybe.. the others.. can help ???.
thank's
hi to all
Shall i stay with wm2003SE or upgrade to wm2005
which is the best os to run
please advise....
Regards
Gugi
hi gugi_sat,
before giving an advice, let me remind you 1st that:
1. the wm 5.0 is not released yet & what we have is 'bm 2005' for "testing" purposes &
2. the future wm 5.0 to be released may or will not be available for himalaya devices (PH10B).
having said that, when you upgrade to 'bm 2005' you will come across several problems like hardware buttons not working, poor quality video & cam and incompatibility problems w/ some legacy apps.
my advice is to test drive bm 2005 and if you can tolerate or 'get around' with those problems, then keep it, if you run into problems, search the forum, if you run into a dead end refer back to point 1. above. otherwise, stay with SE.
btw, i'm using bm 2005! it is a 'breakthrough OS', a work-in-progress with on-going developments by fellow hima die hards & i don't have big hangups with its current problems & limitations! :?
rgds, -rhmartin-
gugi_sat said:
hi to all
Shall i stay with wm2003SE or upgrade to wm2005
which is the best os to run
please advise....
Regards
Gugi
Click to expand...
Click to collapse
The nice thing is: you can always revert back to SE if you would like to: so why don't you try it and see if you like it or not.
Me, like most WM2005-users will not revert back any more because in spite of the unsolved issues (HW-buttons, MMS, bad Camera) it's really a great OS: not only because of persistent storage memory, but also because it's very stable: I hardly ever reset my device since I installed it... This was not the case with the original WM2003 or WM2003SE that I runned for a while.
Cheers 8)
frankman73 said:
unsolved issues (HW-buttons, MMS, bad Camera)
Click to expand...
Click to collapse
I don't have any problems with HW-buttons, they work Ok and yes, my bootloader is 1.2! (upgraded from w2k3se 2.20chs with HimaUpgradeUt.exe/CRC32:92934467, HimaClearJumpCode.exe/crc32:39ba29cc and HimaGetDeviceData.exe/crc32:942fbcf4, and with nk.nbf only! [no radio or extrom])
I don't send MMS very often but receive them frequently, so I use MMSd to fix that!
And camera is really bad for taking video (coz it writes in WMV format), but is Ok for taking pictures
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
regards
GUGI
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
and what about tomtom 5 on wm2005 is it working fine
regards
GUGI
Hi,
you know if bacpack still not working in WM05?
Thanks
gugi_sat said:
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
and what about tomtom 5 on wm2005 is it working fine
regards
GUGI
Click to expand...
Click to collapse
Check out the thread on radio and all versions of w2k5 at http://www.buzzdev.net and make your choice....
I'm using radio 1.17.00 and w2k5 1.60a doctooled (31mb ps) and 1gb SD card.... works fine for me.....
hi i've the windows mobile 2003 in my 2020 i'd like to install the windows mobile 2003 se where i can find it for download?
than a lot :wink:
Try the Search button
http://wiki.xda-developers.com/index.php?pagename=Different Customized WM2003SE for HIMALAYA
HI findus
Thanks for the reply.. Great link...
I have also been having the same issue as tucson where I do not know what Update to use? :shock:
I am running an XDA II with the following ROM:
ROM Version: 1.66.00WWE
ROM Date: 02/20/04
Radio Version: 1.08.00
Protocol Version: 1337.18
ExtROM Version: 1.66.165
I live in Australia so need a ROM that will work with the Australian Phone network
Do you have any idea what ROM I should be using? Or what the most stable ROM in that list would be for me to use? There is just so much I don't know what one to use... Also looking for a very simple install..
Any recomendations any one?
RE
Here, for the Australian in mind
http://forum.xda-developers.com/viewtopic.php?t=13660&highlight=
Hi FOSA
Thanks for the link... GREAT work!
that link points to a new link found at this location now:
http://forum.xda-developers.com/viewtopic.php?p=183450#183450
It's ment to be a newer version
Also as you can see from my post I am a little worried about doing this upgrade as there seems to be many many many many many steps to follow.
I remember upgrading with the official O2 ROM before it was 1 EXE file I ran and it did it all for me.. Does any one know if there is a file like this to upgrade to 2003SE for the XDAII in Australia?
Just that I use my phone every day and if I stuff any thing up I'll have no clue how to fix it and I'll be without my baby for a few days I recon till I get time to try and fix it?
Thanks once again for getting me a step closer to 2003SE
FB
I think the version I just downloaded might be automated as when i ran it I get the same update screen I did when using the official O2 upgrades
Can any one confirm this for me at all If I proceed is there any work that needs to be done after the upgrade? as far as I can see the update program does it all?
Thanks for the support guys... GREATLY apreciated!
Hear is the direct link on what file I got:
http://www.twosx.net/ppc/setup_617.exe
Thanks once again 8)
daveaus has informed me that Sins update is a matter of just running that Setup file and following the prompts...
Thanks for the support guys!
Hope this also helps you out tucson
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....