hi to all
Shall i stay with wm2003SE or upgrade to wm2005
which is the best os to run
please advise....
Regards
Gugi
hi gugi_sat,
before giving an advice, let me remind you 1st that:
1. the wm 5.0 is not released yet & what we have is 'bm 2005' for "testing" purposes &
2. the future wm 5.0 to be released may or will not be available for himalaya devices (PH10B).
having said that, when you upgrade to 'bm 2005' you will come across several problems like hardware buttons not working, poor quality video & cam and incompatibility problems w/ some legacy apps.
my advice is to test drive bm 2005 and if you can tolerate or 'get around' with those problems, then keep it, if you run into problems, search the forum, if you run into a dead end refer back to point 1. above. otherwise, stay with SE.
btw, i'm using bm 2005! it is a 'breakthrough OS', a work-in-progress with on-going developments by fellow hima die hards & i don't have big hangups with its current problems & limitations! :?
rgds, -rhmartin-
gugi_sat said:
hi to all
Shall i stay with wm2003SE or upgrade to wm2005
which is the best os to run
please advise....
Regards
Gugi
Click to expand...
Click to collapse
The nice thing is: you can always revert back to SE if you would like to: so why don't you try it and see if you like it or not.
Me, like most WM2005-users will not revert back any more because in spite of the unsolved issues (HW-buttons, MMS, bad Camera) it's really a great OS: not only because of persistent storage memory, but also because it's very stable: I hardly ever reset my device since I installed it... This was not the case with the original WM2003 or WM2003SE that I runned for a while.
Cheers 8)
frankman73 said:
unsolved issues (HW-buttons, MMS, bad Camera)
Click to expand...
Click to collapse
I don't have any problems with HW-buttons, they work Ok and yes, my bootloader is 1.2! (upgraded from w2k3se 2.20chs with HimaUpgradeUt.exe/CRC32:92934467, HimaClearJumpCode.exe/crc32:39ba29cc and HimaGetDeviceData.exe/crc32:942fbcf4, and with nk.nbf only! [no radio or extrom])
I don't send MMS very often but receive them frequently, so I use MMSd to fix that!
And camera is really bad for taking video (coz it writes in WMV format), but is Ok for taking pictures
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
regards
GUGI
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
and what about tomtom 5 on wm2005 is it working fine
regards
GUGI
Hi,
you know if bacpack still not working in WM05?
Thanks
gugi_sat said:
hi to u all again
thanx for repling
so what version for wm2005 and radio should i install
i got radio 1.18 or shall i go for 1.08 i m confussed here
and what about tomtom 5 on wm2005 is it working fine
regards
GUGI
Click to expand...
Click to collapse
Check out the thread on radio and all versions of w2k5 at http://www.buzzdev.net and make your choice....
I'm using radio 1.17.00 and w2k5 1.60a doctooled (31mb ps) and 1gb SD card.... works fine for me.....
Related
Dear all,
I am currently running ROM V. 3.17.03 and radio stack V. 4.21. and recently contemplating on installing PPC 2003. I have also read tons of unpleasent articles about severe installation failures. Would any of you guys know whether I can re-install my existing rom version in case the installation of the new 2003 version does not work fine. Any other comments concerning this are extremely welcome. Thanks in advance :roll:
I've been back and forth twice now with no problems, however I could not go from PCC2003 to o2's 3.17, said something about authentication, but you can go back to xda dev 1.2 and then, if you wish, install o2's 3.17.
The above was using the Programme A way as I don't (yet) have a card reader.
If you have any concerns I recommend waiting a little while longer till the next version comes out.
My thanks to you York mate
I've also (and a few other friends) managed to go up and down quite a few times without trouble.
Go for it!
2003
i have installed 2003 twice with no trouble i think the secret is to follow the instructions properly.
regards kevin b
Would You please send me the ROM V. 3.17.03 and radio stack V. 4.21 updetes.... About PPC 2003, I heard that there is no official version yet! So let's get in connetion and help ich anothet. Please at that time send the 2 upgrades to me plese!!!!!!!!!!!!!!!
Thanx
Ken_xda said:
Dear all,
I am currently running ROM V. 3.17.03 and radio stack V. 4.21. and recently contemplating on installing PPC 2003. I have also read tons of unpleasent articles about severe installation failures. Would any of you guys know whether I can re-install my existing rom version in case the installation of the new 2003 version does not work fine. Any other comments concerning this are extremely welcome. Thanks in advance :roll:
Click to expand...
Click to collapse
Re: 2003
What I must give/send to You for the upgrade program? I deadle need this upgrade!!!!!!!!!!!!!!
kevin.beecher said:
i have installed 2003 twice with no trouble i think the secret is to follow the instructions properly.
regards kevin b
Click to expand...
Click to collapse
Re: 2003
What I must give/send to You for the upgrade program? I deadly need this upgrade!!!!!!!!!!!!!! Please help!!!!!!!!!
kevin.beecher said:
i have installed 2003 twice with no trouble i think the secret is to follow the instructions properly.
regards kevin b
Click to expand...
Click to collapse
Poci, you just have to go to the O2 UK site, ->Products and Services, -> xda, and there : Get ROM Upgrade , you follow what they said, and can download both , RUU 3.17.03 and RSU 4.21 ... :wink:
http://www.o2.co.uk
upgrade
i found the upgrade on this site under ppc 2003
[email protected]
One more concern to you, generous mates. I have read somewhere in this very forum that the units bought in ASIA are not supporting the PPC 2003 due to some differences in their physical designs. Any comments on this. Thanks again in advance.
One more thing: TO Poci: If you prefer the ppc 2003 over the version 3.17.03, you can download the unofficial release at no cost, thanks to our generous friend, Ali. The site ishttp://www.ali.nildram.co.uk/xda/. Cheers
also you can find the ROM at
http://members.lycos.co.uk/xdarom
regards
Ken_xda said:
One more concern to you, generous mates. I have read somewhere in this very forum that the units bought in ASIA are not supporting the PPC 2003 due to some differences in their physical designs. Any comments on this. Thanks again in advance.
One more thing: TO Poci: If you prefer the ppc 2003 over the version 3.17.03, you can download the unofficial release at no cost, thanks to our generous friend, Ali. The site ishttp://www.ali.nildram.co.uk/xda/. Cheers
Click to expand...
Click to collapse
I have an ASIA unit, running it in Australia fine with the 2003 ROM and 4.21 Radio. I think they are just trying to force people to upgrade to the new XDA II when it comes out.
Jeffrey
Hi again
Problems seem to come and go at their own will. Great news is I have successfully installed the ppc 2003 while the worst news is that I just discovered that my newly and expensively bought external keyboard ceased to funtion since the driver installation indicated versions incompatibility. Any suggestion on the keyboard driver version that could do with the ppc 2003? Anyone? please suggest.
Hi,
I was reading post from "JeffreyK" and saw you are from Australia, I am having problems with GPRS and I was wondering which network you are with in Aus.....
Might help me with settings
seal said:
Hi,
I was reading post from "JeffreyK" and saw you are from Australia, I am having problems with GPRS and I was wondering which network you are with in Aus.....
Might help me with settings
Click to expand...
Click to collapse
I'm on Vodafone.
Jeff
Hi JeffreyK
Can you please help me, I am with Vodafone Australia and I can not get the GPRS working, is yours working and if so how did you do it, I do not understand the setting as they are diferent to PPC 2002 I entered:
vfinternet.au
no user name or password
and it will not connect.
Please if you have any ideas please help
Seal,
Modem Type "Cellular Line (GPRS)"
Access point name: vfinternet.au
Thats it.
I wish mine wasn't working, I've spent over A$600 on GPRS the last few months
Jeff
I just phoned Vodafone and yes as read in this forum " Check that GPRS is active on account" my GPRS is not active. No reason from network why it was turned off, just THEY DON NOT KNOW.
No wonder I couldn't connect........
Vodafone is working on it as I type, will let you know......
My device is: i-mate
In ROM version 1.60.00WWE all midi's music were working fine.
After I upgrade my i-mate to new ROM version 1.72.00WWE,
All Songs seems deferent (may mono or some channel not working),
not like in ROM version 1.60, I made Hard reset and still the same.
may I need midi56.sa.CAB for this issue.
Any help regarding this ?
If no solution,
I am looking for ROM version 1.60.00WWE, to solve this problem.
I am waiting the expert pepole?
Strange,
No reply till now !!!
I am waiting the expert pepole.
Regards,
I haven't experienced this problem, but you might want to replace midi561.sa.cab with midi56.sa.cab in your extrom and config.txt.
but after replacing it you'll have to hard reset it. because i don't think you can uninstall midi561
You can extract all cabs in ExtRom from updates yourself (if you can get your hands on them)
see http://wiki.xda-developers.com/wiki/HimalayaRomkitchen
Thank you M4io,
l test it but still the same problem,
:?
I 'm now trying old ROM v1.6.
I will give you feedback if succeed.
Best Regards,
I tried ROM v1.6 but still the same.
Thank you for usual support.
Regards,
I have the 2.20.07CHS ROM installed but I found some strange folders and the font letters are outside the display (in some screens).
Anyone have the 2.20.07 WWE?
I can't find it...
It exists??? :?
Anyone have the same problems I reported?
:idea: <Sorry for my poor english!> :idea:
RE
Your version is translated from Chinese. Due to the fact that its NOT 100% translated you'll get those strange looking folders/boxes/fonts which are actually in Chinese if you've a Chinese software installed to see them.
Re: RE
FOSA said:
Your version is translated from Chinese. Due to the fact that its NOT 100% translated you'll get those strange looking folders/boxes/fonts which are actually in Chinese if you've a Chinese software installed to see them.
Click to expand...
Click to collapse
Ya! I know that. But I don't like it this way.
There are a 2.20WWE?
Is better to downgrade?
Someone can tell me, please?
There are (or not) a Himalaya 2.20WWE ROM?
Now, ROM 2.20 WWE does not exist.
It doesn't occur in this time.
Still wait for some operator to release it.
So, what the best WWE ROM?
2.02t or 2.06?
I like the Media Player 10 but I hate that chinese characters appearing all the time.
why dont you try the 2k5.. it does have the wm10 and got alot of changes (*better in my opinion, still have some bugs on hardware/soft) but its only minor for me..
make a try.. :wink:
WM2005 experience
I have tryed the WM2005 but seems to me that is a buggy OS.
Don't you think?
Don't try with 2k5, that's will not satify or you try.
hmm.. not for my experience.. my 2k5 is loaded with programs... and works brilliant.
sad part, i must keep stopping all programs manualy using Running Programs all the time.:-(
:wink: I will try again! :roll:
WM2005 need some tunning, right? :?
Something about the ROM.
MSN Messenger.
Synchronization issues by USB.
Anything else? :idea:
It is possible to fix those problem by a patch.
those "strange folders" are "Start menu", "Startup", "Favourate" and "Program" in \windows
You can change those folder to its english name however you must find them in registry and change them too.
some registry need to be translated such as :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Destinations]
you can guss they are "Internet settings" from "Internet ??" etc
Issue of font size can be fixed in
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink]
[HKEY_LOCAL_MACHINE\System\GDI\SYSFNT]
[HKEY_LOCAL_MACHINE\System\GDI\V1\FontAlias]
However i doubt there is anyone still interested in this version.
I dislike some bugs of it which I don't know solution.
such as taping connection icon will lead to hang up if flight mode is on.
I like some program in this CHS extrom such as battery indicator and that flight game.
2.20 ROM
I am just wondering, does anyone know where to find the 2.20 ROM file? Either in Chinese or English?
latest wm2003se rom
My cousin just bought an Acer PDA with the wm2003se 2.20.07 wwe. How can the rom be extracted from the pda. If that can be done I may be able to post it here.
Re: latest wm2003se rom
mrh said:
My cousin just bought an Acer PDA with the wm2003se 2.20.07 wwe. How can the rom be extracted from the pda. If that can be done I may be able to post it here.
Click to expand...
Click to collapse
i don't think that acer has windows mobile 2003 se PHONE EDITION and nobody can take rom from one device to another (not even from alpine to himalaya) so it would be useless
i'm staying with wm2k5
Sergio_Bandeira said:
:wink: I will try again! :roll:
WM2005 need some tunning, right? :?
Something about the ROM.
MSN Messenger.
Synchronization issues by USB.
Anything else? :idea:
Click to expand...
Click to collapse
That's it! I'm trying WM5 again (since two weeks ago).
ROM 1.60a is great and I recommend it to everybody.
This version just lacking one thing: a 32MB permanent storage (it have 2x16MB now).
I have Dpopd 818 Pro and upgrade to WM6, tried both WM6 Crossbow PDAViet ROM v3 and v4, both of them run into the issue where when the phone gets into stand by the phone does not ring when my friend call me.
I've update the Radio v2.61.21. and it doesn't help. Can anyone suggest the solution?
Update:
I downgrade it back to WM5, and the problem is not repro.
There must be some setting different to cause this issue.
Issue Resolved:
By downgrade the RADIO ROM to 2.19 solve the problem!
Same was for me with PDAViet ROM v3, after this I upgraded to V4 - and now 3 days without problems...
Same problem for my S200
ZRimaZ said:
Same was for me with PDAViet ROM v3, after this I upgraded to V4 - and now 3 days without problems...
Click to expand...
Click to collapse
Did you try have your phone stand by for couple hours and try to call your phone from another phone, and see if your phone is ringing?
Thanks!
I have the same problem too, even with other rom(smart1, Aserg AKU 3.3.13 US). Now i've downgrade the radio rom to 2.19.21, seems fine now.
I also have 818pro with PDAViet 4.0.0.4 now.
After I installed 4.0.0.3a I also had this problem. But I solved the problem assigning a new sound as the default one. Don't use the ones that come with rom. Rather copy a new mp3 or wav to the phone and go to the file explorer and set that file as new ringtone.
u55699 said:
I have the same problem too, even with other rom(smart1, Aserg AKU 3.3.13 US). Now i've downgrade the radio rom to 2.19.21, seems fine now.
I also have 818pro with PDAViet 4.0.0.4 now.
Click to expand...
Click to collapse
Can you try to chamg your ringtone, as onesolo suggest below and see if you have the same issue? Thanks!
philchen1979 said:
Can you try to chamg your ringtone, as onesolo suggest below and see if you have the same issue? Thanks!
Click to expand...
Click to collapse
Don't bother to try it, I just did, and it still repro for me.
I think is the WM6 rom problem.
having 818pro with PDAViet 4.0.0.4 now for almost a week, so far no prob
i have an idea, just not so sure about it.
do you have SPL 2.2?
i found that SPL 2.15 work very poor with new radio rom builds, it goes fine with only radio rom 2.19 and 2.20.
can anybody confirm?
kidleaders said:
i have an idea, just not so sure about it.
do you have SPL 2.2?
i found that SPL 2.15 work very poor with new radio rom builds, it goes fine with only radio rom 2.19 and 2.20.
can anybody confirm?
Click to expand...
Click to collapse
I'm downgrage the RADIO rom to 2.19, and I will let you know if the problem has solved. Thank you for the suggestion.
Take a look at Settings/Personal/Sounds & Notifications/Notifications, event "Phone:Incoming call", and Settings/Phone/Sounds Tab.
For me, these settings WERE DIFFERENT!, and my prophet do not ring until set the same value for both...
kidleaders said:
i have an idea, just not so sure about it.
do you have SPL 2.2?
i found that SPL 2.15 work very poor with new radio rom builds, it goes fine with only radio rom 2.19 and 2.20.
can anybody confirm?
Click to expand...
Click to collapse
Downgrade really Help!! I've downgrade to 2.19 and it work fine now! Thank you for the help!!
sazermitra said:
having 818pro with PDAViet 4.0.0.4 now for almost a week, so far no prob
Click to expand...
Click to collapse
My guess is that all these WM6 ROMs are stable by itself. It is when it fully loading with all sorts of you-know-what WM5 applications that something start stepping on something and "bugs" show up. My Chinese add-on caused me some headache with Windows Live and solved after about one and half month for the program to be identified.
The hardest part is nailing which program is "green" for the particular WM6 ROM.
What appls you have on the machine? How extensively you use your machine other than use it as a plain phone?
Please, Where can I find the RADIO rom 2.19?
Thanks
I am facing the problem. Please help me by giving more info about the Radio ROM downgrade.
Please provide the setup for the ROM as well as the steps to install it..do i need to reinstall everything?
I just realized that this happens when i miss a call..and do not clear it from notifications...
No solutions still? Guys i thought this community had some really genius people!
vinbad said:
No solutions still? Guys i thought this community had some really genius people!
Click to expand...
Click to collapse
the guys already said,that if you downgrade to radio 2.19.21,the bug is fixed... Be a genius yourself mate,DOWNGRADE YOUR RADIO ROM
I was going to post a request for someone to upload the radio rom but I decided to use my brain and found it on the xda ftp site:
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/
mr_yellow said:
I was going to post a request for someone to upload the radio rom but I decided to use my brain and found it on the xda ftp site:
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/
Click to expand...
Click to collapse
that's the spirit mate!!good for you!
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....