I have bootloader version: 1.03
When I turn on my xda i see only screen:
serial
v1.03
i think that my xda is dead how can i repair this?
I try flash my device using sd but i dont have this option in my bootloader..
You should be able to upgrade your device using the HimaUpgradeUt program. See my post here for information on what to look out for, etc.
I think thats is not good way because i cant connect my device to pc using activesync.. i have only bootloader mode on my xda..
That doesn't matter, the upgrade doesn't need Activesync. It looks after its own connections.
I just connect my xda in bootloader mode to usb. The activesync not saw may device but i run HimaUpgradeUt.exe and my device start upgrade! I have Germany ROM now i upgrade this To same English ROM.. Before i do this that way program show mi error 102.. now its look like everthing be good.. we will see for 5 minutes.
sorry for my english
i am from poland
OK. Let me know what happens.
The program just finish operation.. but on my device screen is still:
Upgrading
radio stack
Please Wait...
I dont know what i should do..?
That's OK. As long as the PC said 'Congratulations' its all done. Take your device out the cradle, hard reset it and it will run the standard setup.
Everythink is great! My Pocket Pc work! Thank You for Your advise.
Maybe somebody know where I can find some Rom to Xda.. Without O2 Rom because i have it. Maybe there is some rom kitchen like for xda 1
Excellent news For information about customising the Extended ROM, search for Extended ROM on the forums.
to dcs: I'm now upgading my o22'Rom from v2.06 to 2.20 (translated frm chinese --> english). after I completed fixing country ID, I have a new erro (erro102: CE image file checksum erro. the Rom image file to be used for the update is corrupt). I try to download again and update but I fail, the erro is 102. please show me hoe to pass this erro.
thank
If u see the log after HimaUpdIt ul see some like this;
16:27:04 Connection with USB
16:27:37 Begin stage 1
16:28:11 End stage 1
16:28:12 Begin stage 2
16:28:12 Write block1
so, he searches for his own connection! Dont worry just download the rom, himaupdit file and upgrade ur xda Tell us how it works
Related
im runng wm2003 - rom version 4.00.11, and radio 4.16.00
i want to use xda as modem for my laptop, but i dont seem to have the wmodem application and i dont want to have to go through the whole rom change process again.
can i download just the wmodem application from somewhere or is there another downloadable program ?
thanks,
David
[email protected]
Actually we aleardy tried it and its doesnt work, it wont connect and if connected the only way to stop it is to soft reset the device. This is only when using WM2003.
refer to WMODEM search in forum i have 2 topics that will reply in details to your questions
ok, check this out...
I am using a att tilt(TyTN II=Kaiser) and i have all the settings in my Viata PC to use it for a mobile modem and it keeps telling me that WModem.exe is erring...
Here's the specs of my device....
ROM version 3.57.502.2 WWE
ROM date 07/17/08
Radio version 1.65.21.18
Protocol version 25.88.40.05H
I did a ROM upgrade myself some time ago from 6.0pro to 6.1pro and would just re-flash and update again to recover lost or corrupted data on device but i cant even remember how the heck i did it in the first place...
Can you help me, ANYONE?
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Please anybody can give me a step by step info on how to copy the original rom to SD card, I need to change language from german to english and I want to keep the original german rom just in case. Thx
Does it have to be on sd there are other way of doing it which I will be able to talk you through (I think) if you need a hand
Well I was thinking to flash it to the sd in case the phone goes dead and you're out of activesync so the only way of flahsing it will be through SD. But another way of flashing is more than appriciated so I'll be waiting for ur guide.. do u happen to know why I can't see the options in the bootloader? thanks really
1st ... I have no idea why you cant get into the bootloader. On my xda 2 after a cold reboot i just get the serial and then when in the cradle I get usb, from their I dont know what to do. I would class myself as a newbie as well but I can talk you through what I did.
Which rom is it that you want to flash?
The extended rom or the Os rom?
i'm willing to flash the OS rom and not the extended. My version is 1.03.00 Ger and I want to flash to the "Dangaard (Qtek) 1.60" or RUU16006WWE_T-mobile_NL version which is an english one although I heard some people had their phones dead while doing so. I must find a way to back my rom 1st.. Did u do the update urself??
Yes I did the update using a programme called
HimaUpgradeUt.exe
I was originally after flashing the extended rom only, but due to not fully understanding the instructions at
http://forum.xda-developers.com/viewtopic.php?t=6470&highlight=
I made a mistake and flash the Radio Stack - the OS and the extended rom as well. After this I worked out how to use HimUpgradeUt.exe to flash the extended rom only. I am guessing that if you follow the same procdure for flashing the rom and flash the OS you will get the same results.
However I haven't tried it yet. I am hoping to get the radio rom and the OS rom for O2 xda2 and try it but until them I cant confirm it. I am only guessing that it will work?
So its up to you I have successfully updated the extended rom 4 time but I just dont have the files to do it?
Where did you get you Os file from?
I already tried Multi-Port/USB TTY program , but in the instructions it says"
3. boot the machine into bootloader mode (hold the Power and directional pad , then push reset)
4. Run the rompdate utility, select the comport as "wceusb001" or something like that as the default comport." The problem is that After going into bootloader mode I launched the romupdate utility but in the com-ports I only see com1 and com2 ,there is no wceusb001!!. And where did u see the d2s that I hear about??
I've got the downloads from the forum this one http://forum.xda-developers.com/viewtopic.php?t=6214&sid=0dad85b97d280219dc51962a01a4997b and the other form here http://shop.store.yahoo.com/cellpoint/tmobilemdaii.html
It seems that we are taking cross purposes here.
Using HimaUpgradeUt.exe you can update the roms using .NBF files,
hence the way in which I updated all 3 of my roms in one go.
Radio.nbf
Ms.nbf
Exteneded Rom.nbf (can’t remember the actual name) it looks like you are using a different up loader or have different files to upload. I can only really help with advice on the process that I followed. I can provide you with the files that I had, if you want it will change your 02 format to I-Mate in English.
Does this help?
well I know we have differnet purposes but we should use the same tool I guess if we followed this link. http://forum.xda-developers.com/viewtopic.php?t=6470&highlight= and the tool is Multi-Port/USB TTY program to back up rom or extended rom. Please provide me the info to back up the rom no matter if to SD or HD. Thanks for ur time man.
I think that you can try using ositools I will find the link and then post it, but again I am still not sure how you reinstal it afterwards
whafni77 said:
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Click to expand...
Click to collapse
I am in the same situation with you, have you solved yet?
Serial / USB V1.01
I had the same problem, and I found the cause to be a USB Hub. I found that when I plugged the cradle directly into my PC I managed to load the update without any further problems.
I hope this helps
you have to disable usb or com port in activesync, before trying to connect with mtty, or terminal program.
see http://wiki.xda-developers.com/wiki/HimalayaBootloader
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
I tried to do a ROM Upgrade but something went wrong and now the screen on my XDA II just shows the words Serial and v1.06. When I did a hard reset the screen still shows the same thing. When I connect the device using the cradle the word Serial changed to USB, but it didn't seem to connect to the PC. The Activesync was not activated also. When I tried to run the ROM Upgrade again, it shows ERROR 100: MODEL ID ERROR. I tried to run HimaUpgradeUT_noID.exe, it shows Error 103: ROM IMAGE FILE NOT FOUND. Can anyone please help me get my device working again? Thank you in advance.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
[email protected] youre own risk.
Dead XDA II
Hi Guys, I'm new to all this because my XDA has never failed me, until now. I too tried to upgrade the ROM, realising too late that the upgrade from a UK site was not meast for the Asian zone.
Anyway, I tried downloading the following link:
http://rapidshare.com/files/36498840...adeUt_noID.rar runterladen.
When I tried to lanch the file it tells me that RUU.dll is missing.
Is there a link that works or is there a fix for this? As I said, I'm new to this therefore need step by step instruction.
Hope someone can assist, I'm lost without my XDA II.
Thank you
Ben
cannot download from the link
hello
I have a black screen on my qtek 2020i (XDA2i) after upgrading the ROM, and I saw that the solution you are providing works good, but I cannot download the fix using the link
please advice
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar
XDAII Dead
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
m1000 dead sad
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
thanks for my help
really want to say thanks who helpd me i upgraded now my spv m1000 my self without any problem becouse i brought data cable of i mate and its workin fine with my spv m1000 yahooooooooo xda roken
usman_hussain1987 said:
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
Click to expand...
Click to collapse
Hi Usman,
What OS of windows PC do you use? it can't work with windows vista. Try to downloads new version of active sync then try it again. The upgrade is specify, can't work in any kind of devices