I have wm2003 4.0.11 cooked and when i get an sms the screen doesnt wake up, it plays the notification, the screen wakes when there is a call though.
any ideas guy's n gal's
Smallboy
i think its just the wm2003, because - if i remember correctly, in the rom versions 3.xxxx the screen would turn on, but not in this one.
This is a feature. A nice one, I think, but someone came up with some software to remove it. Sorry, can't remember any more details, but some searching in Google ought to find it.
cheers, will advise if i find it.
I have the same thing, apperciate finding solution ...
whilst searching via google have got nothing in return
regards,
monika
mine turns on when an sms is recieved, the problem is it doesnt turn OFF after a few min like it should (like it does if its turned on but recieves no sms). grrr.
-arebelspy
Check this:
http://www.pocketgear.com/software_detail.asp?id=10717
thank you very much for a solution
regards,
monika
ROM 4.01.00 does wake up the screen upon receiving SMS
that's good to know ....
that you very much for the info, seems I do need to make an upgrade anyway
regards, monika
again, be careful. The 4.01.00 file contains RSU upgrade as well. It will put you on RSU 6.24.01 which I 'm not sure it will work for you. Try to extract the ROM upgrade files only using Winzip.
thanks for the fix, anywhere i can get a cooked 4.1.0 rom as i am in the uk.
cheers
Do a search in the Upgrading and Modifying It section of this forum for 4.01.00. One of the posts has a link to the 4.01 ROM upgrade (~40M). Worked flawlessly for me.
Do a search in the Upgrading and Modifying It section of this forum for 4.01.00. One of the posts has a link to the 4.01 ROM upgrade (~40M). Worked flawlessly for me.
hallo,
Im using Omega Reds 1.2 Wm2003se now for a while but every SMS is send twice to the one I send it to. The problem is alsow that it come twice on the bill to.
Does someone know if there is a fix for this or can someone tell me where I can download a version of WM2003se wich doesnt have this problem.
manny thanks in advance
the problem is not! 2003SE but if you use pocketplus and have it set to close programs insted of minimize it
and close outlook before it show msg sendt icon
then outlook goes crazy
sjoerd666 said:
hallo,
Im using Omega Reds 1.2 Wm2003se now for a while but every SMS is send twice to the one I send it to. The problem is alsow that it come twice on the bill to.
Does someone know if there is a fix for this or can someone tell me where I can download a version of WM2003se wich doesnt have this problem.
manny thanks in advance
Click to expand...
Click to collapse
i ever had a same problem too,i use wm2003 se and spb pocket plus.the solutions in the menu x close button-exception-add tmail.exe that you can find in windows folder,do same thing maybe help
I have Verizion Wireless. I just installed BootLoader 2.40, Titan_Radio_ROM_3.42.30, dcd_titan_kitchen_3.2.2, and dcd Verizon Carrier 20080706.cab. I don't know if I was supposed to, but also did *228 option 1 to program my phone and *228 option 2 for updating roaming cababilities. The internet works fine on the phone and I can recieve text messages without any problems, but I can't make or recieve phone calls. Thanks for your help and time!!
Gonna go out on a limb here and guess that it's saying you're not authenticated?
You need to call Verizon and have them authenticate you. It's normal when you go from stock to a GPS radio.
I go with gc14 on this one. Just had the same thing happen to me a while ago after just doing a hard reset...no update ROM, radio, or anything. Just hard reset and no more authentication...what a pain. lol
Oh, yeah. I listened again and that's what she said. OK, I'll call them tomorrow.
I even got my TomTom GPS software working. I didn't need to use any 3rd party software to get it working either like it said on the forums.
I even got Opera Java working, but I got some kind of message when I was installing the Java software saying that Sprint couldn't guarantee something. I don't remember the exact message, but I don't have Sprint, I have Verizon. Did I install the wrong ROM or something? Am I going to have problems now? Thanks!
How come everywhere I go now it thinks my phone is a Sprint PPC-6800, when it's really a Verizion XV-6800? I just went to Yahoo.com and it's calling my phone a Sprint PPC-6800. Is this going to cause any problems with my Verizon account? Thanks..
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Apota said:
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Click to expand...
Click to collapse
I don't use text messages, so I can't be sure, but I think there are other links about text messages. You likely need to install a program. Try searching and let us know if you find it.
As far as the flash with v5 of camera, I think you are out of luck. My memory is there is no flash. There is a way of installing the old camera back without doing a hard reset. I just don't remember how to do it. You can try searching for this too. Again let us know if you find it. Hopefully someone else will be able to help more.
Yes, I think I found the solution, I did what it said and now it says SMS/MMS, but I haven't tested it yet. So, I'll see. I just need to know about the camera now. That's the only issue..
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
don't down grade just reflash a cooked rom with the version 4.05 something camera has a flash
Reflashing ver 4.05 when you'd installed ver 5 IS downgrading in my book
Big Dawg 23 said:
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
Click to expand...
Click to collapse
1st - The camera you used is version 5, to have the flash again you will need to re-cook a ROM with version 4.X....
2nd - For the latest MMS, use GC14's 5.0.31.25 cab of Arcsoft. The incoming MMS issue where the phone number is shown instead of your contact has been fixed. Find that cab here MMS 5.0.31.25
Yes, I've already read all of those links many times. I saw the information about the OEMizer. It said it was OPTIONAL. It doesn't really tell me what it is, or what it's for. Since this was the first time I ever installed a new bootloader, radio, rom and VZW cab, and didn't really know what I was doing, I didn't want to make it too complicated and overwelm myself. I still don't know what the OEMizer is, but I guess I can run it and see what happens. I need to make a new ROM anyways for the camera. I still have a few questions.
- What is the OEMizer for and is there someplace that explains it's settings?
- I can't find OEMizer in the Kitchen's Tool directory or any of the other Kitchen's directories. Where is it at? I did a search on the internet and couldn't find it.
- What is PagePool Changer? Is that something I need to use?
- Now I have the latest bootloader and radio installed in my phone already, can I make a new rom via the kitchen and just install it without having to worry about anything else?
- I guess I will still need to run the VZW cab file after I install a new ROM, but that should be it, right? Just those two things?
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
- WM6.1 is grouping all my text messages together, which is great and I love it, but the only problem is sometimes I want to deleate one text message and it seems like you can't and you have to delete all the text messages from the same person. Is that true, or is there a way around it?
Thanks everybody again for all your help!!!
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
Click to expand...
Click to collapse
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
To use this, uninstall any version of Arcsoft you may have installed currently. Once it is fully uninstalled, check your registry and make sure there is nothing for Arcsoft under "HKLM\Software." Next, install this cab. Once it is done installing, check your registry under "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader" and make sure X-VzW-MDN is set correctly with your phone number.
gc14 said:
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
Click to expand...
Click to collapse
Yeah that was just for testing purposes originally...to make sure the previous one was completely uninstalled, then to make sure the new one installed correctly. It's been verified working though for a while.
hopefully someone here can helpl
after receiving sms/text msg I get a pop-up and then the msg seem to disappear. I`ve checked my setting but can`t find anything wrong.
I\ve downloaded some cabs this weekend (manilla, skins and so on) and maybe this have caused it. Now I\m hoping that one of you have similar experiences and have a quick fix. If there is something wrong with the cabs i`ve downloaded the forum prob wants to know also.
Really don`t want to reset my hd2 now.
ronny.olsen said:
hopefully someone here can helpl
after receiving sms/text msg I get a pop-up and then the msg seem to disappear. I`ve checked my setting but can`t find anything wrong.
I\ve downloaded some cabs this weekend (manilla, skins and so on) and maybe this have caused it. Now I\m hoping that one of you have similar experiences and have a quick fix. If there is something wrong with the cabs i`ve downloaded the forum prob wants to know also.
Really don`t want to reset my hd2 now.
Click to expand...
Click to collapse
Your fix is in this thread
http://forum.xda-developers.com/showthread.php?t=752280
Russ