Related
Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also wu5262 and ahmadfarid for testing.
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Buch070 said:
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Click to expand...
Click to collapse
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
faisal.husain said:
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
Click to expand...
Click to collapse
OK, I will try.
Buch070 said:
OK, I will try.
Click to expand...
Click to collapse
Please keep us posted
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
faisal.husain said:
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also WU3562 and ahmadfarid for testing.
Click to expand...
Click to collapse
Finally it's out btw faisal, you keep getting my name wrong, it's wu5262 not wu3562 not a big deal really, thanks for the hard work
Sorry mate will correct, I suffer from dyslexia
Buch070 said:
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
Click to expand...
Click to collapse
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
faisal.husain said:
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
Click to expand...
Click to collapse
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Buch070 said:
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Click to expand...
Click to collapse
Yes I have tried to install true vga, it is a bit flakky on my dopod with or with out the english. However what i found was after soft booting a couple of times it kinda of worked.
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
victoradjei said:
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
Click to expand...
Click to collapse
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
faisal.husain said:
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
Click to expand...
Click to collapse
Ok will do that in a few hours time. Currently out with the kids
victoradjei said:
Ok will do that in a few hours time. Currently out with the kids
Click to expand...
Click to collapse
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
faisal.husain said:
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
Click to expand...
Click to collapse
Seems that most of us is not that young already
ahmadfarid said:
Seems that most of us is not that young already
Click to expand...
Click to collapse
Maybe that is the reason why we can afford such expansive toys.
TrayApplet alignment
Buch070 said:
Maybe that is the reason why we can afford such expansive toys.
Click to expand...
Click to collapse
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
victoradjei said:
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
Click to expand...
Click to collapse
do you know how to hide the connection icon in system tray when sync? it waste me one row of space just for this icon....
Dopod has release a new U1000 rom. Just log on to their site and grab your copy.
Yesterday I flashed my Charmer with gullum Prophet Touch V5. beta rom. Very nice, and also it is a quick rom too. The cube is also working by pressing the lower left button ("Record Button" or "Cassette Button" or "Tape Button").
Every app is working fine... Camera is working now with FIX.
UPDATE: Camera will work with this update http://forum.xda-developers.com/attachment.php?attachmentid=45688&d=1185974087
link to the thread by gullum:
http://forum.xda-developers.com/showthread.php?t=318877
Thats what I did:
Downloads:
Prophet Touch V5. beta -- http://rapidshare.com/files/44842758/ProphetTouchV5beta.zip.html
Download the xbeta Chinese WM6 rom -- http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
1. Flash back to normal Wm5 Akku 3.3
2. unpack Download the xbeta Chinese WM6 rom to c:\charmer
3. Copy Cert_Spcs.cab and EnableRabi.cab to your charmer (itsutils folder)
4. run both cabs and than soft reset
5. turn phone off (not the charmer - go to flight mode)
6. copy the os.nb from touch V.5 beta to c:\charmer folder
7. besure that there is a connection to pc and pda
8. go to c:\charmer and run xBeta cmd
9. typ in the number witch the os.nb has
10. wait for the app till it gets green again (ca. 15 minutes)
11. make hard reset
12. do not allow to install the extended rom -- soft reset
ENJOY
Sorry for my poor english!
Great thanks to gullum, adexxx and the boys and girls from xbeta,
also to all the developers around here.
GREETS from germany
camera might work
Charmer Touch rom
Charmer Touch rom
can any one try to see if this one works on Charmer it is almost the same as the Prohpet Touch rom I made but with Charmer drivers and camera.
but I do not have a Charmere and therefor can not test it
thanks gullum
I will try tonight
ps. this is the "best charmer rom" ever made
anja31 said:
thanks gullum
I will try tonight
ps. this is the "best charmer rom" ever made
Click to expand...
Click to collapse
hehe and I didn't make it for charmer
gullum said:
someone might try changing or deleating 1 regestry
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Make"="HTC"
"Model"="PM300" <-- change this to the model number of charmer
if it doesn't work try to delete it
Click to expand...
Click to collapse
this rom are the best news of the day for me
did this registry-hack work?
I don't think so, this key configures EXIF data in photo files.
---
update
I tried to delete this registry key and camera won't work. I think because driver on Prophet I slighty diffrent than driver in Charmer. To make camera work we must create a CAB with driver and registry setting and maybe other camera application.
cheers.
great ROM
I've just tried this rom and think it is really good, thanks.
I've tried the camera fix on this thread and also the cab file on the other recent wm6 thread, neither work.
I've also noticed that my screen ok button does not work. I have to use a hardware button. Any ideas?
thanks
pjam
I need to find what camera driver Charer uses... the Prophet & Hermes uses S5K3BAFX.dll and wizard uses OV9650.dll so I need to figur out which Charmere uses then maybe I could make a cab for the original Charmer camera for you guy to use
pjam said:
I've just tried this rom and think it is really good, thanks.
I've tried the camera fix on this thread and also the cab file on the other recent wm6 thread, neither work.
I've also noticed that my screen ok button does not work. I have to use a hardware button. Any ideas?
thanks
pjam
Click to expand...
Click to collapse
That is because the alignment of the Touch.dll thats been modified from the elf(HTC Touch) touch.dll you will need to align the screen a bit differantly
on the left side align spot on to the + but on the right side align the bottum + a bit abow and the top + a bit beneth
Thanks for that. It seems to work some times but not always.
The fix in this thread allows the camera to start but then a message is displayed saying that it could not be configured.
http://forum.xda-developers.com/showthread.php?t=319151
pjam
pjam said:
Thanks for that. It seems to work some times but not always.
The fix in this thread allows the camera to start but then a message is displayed saying that it could not be configured.
http://forum.xda-developers.com/showthread.php?t=319151
pjam
Click to expand...
Click to collapse
That's because the new camera uses s5k3bafx.dll and the charmer uses ov9650.dll
I'll make a cab of the camera used in Essentials 000.2 distrib 1 for you guys... It will take some time because there are quite a lot og regs that I need to tap in by hand to be prisise it 1133 lines
so be patiand anyway I'm sending V5 beta 2 for testing now so it might work for you guys too
That would be great.
I think i have the screen issue sorted. It has to be aligned quite accurately.
Many thanks
pjam
Charmer camera
could someone try this cab and see if it works?
View attachment Charmer_Gullum_camera.CAB
if it works I'm verry happy then I can make cab's 00 times faster then before
Just tried it. Can't see the camera app in programs anymore. Pressing the camera button shows the timer for a second then nothing.
pjam said:
Just tried it. Can't see the camera app in programs anymore. Pressing the camera button shows the timer for a second then nothing.
Click to expand...
Click to collapse
could you try to see if it works from the windows folder
maybe I have forgot some shortcut in the cab
if that works I'll make a new cab with shortcuts
Camera isn't working from windows directory. You must change registry settings to new camera driver.
Hi
have the same problem camara dont start then i try this fix
k0ster_WizaCharmCamFix.cab
after this the software start but device driver cant load
can anyone upload the charmer driver cab for the camera?
jerry
CAMERA WORKS!!! (not at all)
Install Charmer_Gullum_camera.CAB (Gollum Post) & k0ster_WizaCharmCamFix.cab (last post) & my regfix (HTC_Camera_regpath.zip) from attachment and camera works, but camera preview is flipped. But in other ROM this issue is solved. There is another bug, when you close Camera app, screen stays in Landscape.
I try to solve this bugs today.
ps Install regfix with registry app, for example: Resco Exporer, using Import function.
Cheers.
-----
I solved flip-bugs, will upload instructions soon.
I can confirm that the camera now works with the above fixes. I would really like the fix for the flipped view and screen rotation though.
thanks
pjam
FINAL PATCH (I think )
There is a final FIX for CAMERA (attachment: charmer_cam_fix_touch.zip) . You don't have to install other patches (Gollum, k0ster) for Camera. Install this CAB only. Camera is working propertly. If anyone have problems - please post.
How to Install:
1. Download ZIP file. Unzip.
2. Copy CAB to PPC
3. Install on PPC
4. Softreset PPC
5. Voila! Camera is working.
PS I can upload fix without Picture Themes (more free space on storage) if anyone wants.
Guys,
Finally, the program i missed most since the wm5 in my ATOM is Spb PhoneSuite, is FIX!! WORKING in our ATOM now!!!
I did alteration to the installation file and managed to fix the compatibilities issue!!
**Notes to the Mod here. I did only compatibilities fix to the cab and attach the installation file here. No cr**k or Ser** is provided. Please do inform me if im not allow to post this here, i will remove it ASAP
**Notes to people who download this here. This will install as a trial without serial, if you like it please do buy it
ckaidi said:
Guys,
Finally, the program i missed most since the wm5 in my ATOM is Spb PhoneSuite, is FIX!! WORKING in our ATOM now!!!
I did alteration to the installation file and managed to fix the compatibilities issue!!
**Notes to the Mod here. I did only compatibilities fix to the cab and attach the installation file here. No cr**k or Ser** is provided. Please do inform me if im not allow to post this here, i will remove it ASAP
**Notes to people who download this here. This will install as a trial without serial, if you like it please do buy it
Click to expand...
Click to collapse
i have registration for that...hehehe
is this power hungry?
GREAT CKAIDI, i tried to install this cab in my atom, and its working perfectly now.
so now SPB PHONESUITE is not a problem anymore in WM6 AKU 0.7 by using this cab.
for you guys, the only problem is the registration key;-) 15 days trial only.
dont worry we're here este#4%[email protected] i mean , u can buy the program.
anyway i just want to try and its working. As of now, i prefer to still use HTC plugin. I dont need call filtering also, so maybe i will reinstall this program when i need it.
thank
great job thank you
I miss spb so much
I can not switch between the profiles? is it common problem with this file? or I just have it with my mobile?
Found a bug!!! The service failed to start!! and therefore you cant use the profiling!!
The workaround is to manual start the "spbphonesuite" service everytime you soft reset and everything will work. THis can be done thru sktool or memmaid.
Not a long term solution but rest asured that i will try to solve it soon
Anyone have any ideas how to load/unload dll pls PM me. This may be the way to solve many SIP and software issues.
Thank!!
thanks ckaidi
i found the solution:
Under the registery : HKLM\services\spbhonesuite\
Need to change the key " UnsignedService" from "0" to value "1"
bayatmu said:
thanks ckaidi
i found the solution:
Under the registery : HKLM\services\spbhonesuite\
Need to change the key " UnsignedService" from "0" to value "1"
Click to expand...
Click to collapse
i tried that, does the service auto start after you reboot? doesnt work for me
ckaidi said:
i tried that, does the service auto start after you reboot? doesnt work for me
Click to expand...
Click to collapse
Yes
the services started automaticlly after the reboot
Profiling is working fine
bayatmu said:
Yes
the services started automaticlly after the reboot
Profiling is working fine
Click to expand...
Click to collapse
Hmm...Although i know about this UnsignedService key, but i just hardreset and install phonesuite only but i dont see this key. HOw did you get it to work? can share your step by step so that i can recreate the cab for others to use?
Thank!!
great job ckaidi!!!
This forum is alive!
cheers,
Jiggs
ckaidi said:
Hmm...Although i know about this UnsignedService key, but i just hardreset and install phonesuite only but i dont see this key. HOw did you get it to work? can share your step by step so that i can recreate the cab for others to use?
Thank!!
Click to expand...
Click to collapse
went first to sktools, selectedt Services, select spb phone sutie and run it,
then while you are at services (sktools) just hlight the spb phone suite and keep holding the sytels on it untill the popup window apear, select registry explorer, secroll down up to the last key which is "UnsignedService", edit that key and change it from "0" to "1", reboot the phone, and injoy
Regards
SPB Phone Tools
That is the very good news to have phone suite running in WM6. Many Thanks
ckaidi, what are the modification made to the installation file? does this mean all other problematic software on jiggs's WM6 can be fixed?
just asking. no technical knowledge how cab files are made.
I don't have such key "Unsignedservice", I created it manually, but it didn't help, what should I do?
jiggs said:
great job ckaidi!!!
This forum is alive!
cheers,
Jiggs
Click to expand...
Click to collapse
ckaidi now will help you to solve more problem in upcoming ROM
@bayatmu
bro are you using atom?which model and which ROM pls let us know can?
@aleden
bro i too had this problem, still searching for solution. Do use the sktool or memmaid to activate the service after you soft reset for the time being
@uan
bro i did alteration the to installation "cab" by removing the "pre xml" requirement. This solve the installation issue, however compatibilities are not guarranteed.
@EVERYBODY
Guys, if you all have any ideas how to solve the certificate issue which all cooked WM6 ROMS suffer this problem except for those that can disable certmod.dll, unfortunately, our certmod.dll can't be hacked as mentioned by Jiggs. Please do drop a PM to us. Thank!!!
Got a bug. The wireless icon works doesn't work. You can choose which wireless connection to turn on or off but it doesn't turn them on or off. Any ideas or I'm the only one experiencing this?
@yetdy
yes as mentioned on the earlier post, the service does had bug as it start after reboot, so you got to manually start the service using SKTOOL or MEMMAID, after which all the function will resumed
ckaidi said:
@bayatmu
bro are you using atom?which model and which ROM pls let us know can?
@aleden
bro i too had this problem, still searching for solution. Do use the sktool or memmaid to activate the service after you soft reset for the time being
@uan
bro i did alteration the to installation "cab" by removing the "pre xml" requirement. This solve the installation issue, however compatibilities are not guarranteed.
@EVERYBODY
Guys, if you all have any ideas how to solve the certificate issue which all cooked WM6 ROMS suffer this problem except for those that can disable certmod.dll, unfortunately, our certmod.dll can't be hacked as mentioned by Jiggs. Please do drop a PM to us. Thank!!!
Click to expand...
Click to collapse
I am using Atom Ecec W6 AUK7
as i mentioned before, i just activated the service of Phone suite through sktools then changed the key to value of one
I just found it at HTC e-Club, on this page (Its under: "My Download > Other Downloads", it wasent in the: "My Download > Phone Software Updates"): http://member.htc.com/member/SoftwareDetali.aspx?pid=44 (I think you have to login first before the link works (HTC e-Club login))
This is the full text:
27-02-2008
Hot fix for abnormal Nike TouchFLO screen display and keyboard output problems
If the TouchFLO screen display is abnormal (for example, the icons disappear, the words overlap, and so on) and the keyboard output characters are incorrect (pressing a key doesn’t result in the desired character), please download and install this fix to solve the problem.
Update: I have just uploaded it.
Its a native WM program, not a windows/activesync installer.
::::::::::: LOL:::::::::::::
Update fail, CEInfo is Niki (Required 1.31 or 1.35)
wtf???
someone upload it please
i will as soon as i get home... 20 minutes...
ok the fix it just a new OEM_Misc.dll, ive extracted the cab from that exe and also the new dll itself and attached them here (useful if you cant install the EXE and for rom cooking)
joaosousa said:
::::::::::: LOL:::::::::::::
Update fail, CEInfo is Niki (Required 1.31 or 1.35)
wtf???
Click to expand...
Click to collapse
OK ... i have the answer!
You use a Cooked Rom from Tom? This Programm look for the ID you can found on the first bootsplash. if you use a HTC OEM Rom, you have the ID D 1.31 or D 1.35.
OEM Rom User can use this Update!
NetrunnerAT said:
OK ... i have the answer!
You use a Cooked Rom from Tom? This Programm look for the ID you can found on the first bootsplash. if you use a HTC OEM Rom, you have the ID D 1.31 or D 1.35.
OEM Rom User can use this Update!
Click to expand...
Click to collapse
Yes i am using tom's rom.... i will install the cab!
Thanks Midget_1990!
Midget_1990 said:
ok the fix it just a new OEM_Misc.dll, ive extracted the cab from that exe and also the new dll itself and attached them here (useful if you cant install the EXE and for rom cooking)
Click to expand...
Click to collapse
Hi thanks so much for this does it mean that the cab just modifies a dll or do we have to install the cab AND copy the dll somewhere ?
mcoquet said:
Hi thanks so much for this does it mean that the cab just modifies a dll or do we have to install the cab AND copy the dll somewhere ?
Click to expand...
Click to collapse
all it does is replace the dll so just the cab
ok, installed the cab fine
noticed that :
1) touchflo/cube SEEMS a bit smoother
2) regarding "the keyboard output characters are incorrect (pressing a key doesn’t result in the desired character)", it does NOT fix the issue where the hardware keyboard is incorrectly mapped, unfortunately
mcoquet said:
ok, installed the cab fine
noticed that :
1) touchflo/cube SEEMS a bit smoother
2) regarding "the keyboard output characters are incorrect (pressing a key doesn’t result in the desired character)", it does NOT fix the issue where the hardware keyboard is incorrectly mapped, unfortunately
Click to expand...
Click to collapse
What Rom you have installed?
NetrunnerAT said:
What Rom you have installed?
Click to expand...
Click to collapse
I have an original unmodded operator ROM (SFR France), not Tom's.
if you reboot ... what tells your splashscreen? i need D value!
NetrunnerAT said:
if you reboot ... what tells your splashscreen? i need D value!
Click to expand...
Click to collapse
D : 1.31
G : 25.61.30.03H
R : 1.58.16.27
i think you need to edit your keymapping! this fix is for other problems!
NetrunnerAT said:
i think you need to edit your keymapping! this fix is for other problems!
Click to expand...
Click to collapse
ok then, the description made it sound like it fixes the hardware KB bug... and i don't think anyone has found a fix yet for this KB keymapping issue
mcoquet said:
ok then, the description made it sound like it fixes the hardware KB bug... and i don't think anyone has found a fix yet for this KB keymapping issue
Click to expand...
Click to collapse
it think it supposedly fixes the problem where if you are typing quickly on the hardware kb it gets confused and adds more letters that you pressed (for me it once thought 'love you lots xxx' was 'obesity in Rome twangy' )
i sent about 30-50 messages daily and since the fix have noticed that although not fixed entirely the number of occurrences of this problem are lower.
Midget_1990 said:
ok the fix it just a new OEM_Misc.dll, ive extracted the cab from that exe and also the new dll itself and attached them here (useful if you cant install the EXE and for rom cooking)
Click to expand...
Click to collapse
hey Midget,
where does the oem_misc.dll file get placed? in the \windows\ directory??
never mind I got it.......
I installed this and noticed no difference at all.
Did anyone notice anything?
ventipi said:
I installed this and noticed no difference at all.
Did anyone notice anything?
Click to expand...
Click to collapse
no not really....