Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also wu5262 and ahmadfarid for testing.
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Buch070 said:
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Click to expand...
Click to collapse
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
faisal.husain said:
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
Click to expand...
Click to collapse
OK, I will try.
Buch070 said:
OK, I will try.
Click to expand...
Click to collapse
Please keep us posted
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
faisal.husain said:
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also WU3562 and ahmadfarid for testing.
Click to expand...
Click to collapse
Finally it's out btw faisal, you keep getting my name wrong, it's wu5262 not wu3562 not a big deal really, thanks for the hard work
Sorry mate will correct, I suffer from dyslexia
Buch070 said:
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
Click to expand...
Click to collapse
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
faisal.husain said:
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
Click to expand...
Click to collapse
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Buch070 said:
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Click to expand...
Click to collapse
Yes I have tried to install true vga, it is a bit flakky on my dopod with or with out the english. However what i found was after soft booting a couple of times it kinda of worked.
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
victoradjei said:
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
Click to expand...
Click to collapse
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
faisal.husain said:
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
Click to expand...
Click to collapse
Ok will do that in a few hours time. Currently out with the kids
victoradjei said:
Ok will do that in a few hours time. Currently out with the kids
Click to expand...
Click to collapse
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
faisal.husain said:
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
Click to expand...
Click to collapse
Seems that most of us is not that young already
ahmadfarid said:
Seems that most of us is not that young already
Click to expand...
Click to collapse
Maybe that is the reason why we can afford such expansive toys.
TrayApplet alignment
Buch070 said:
Maybe that is the reason why we can afford such expansive toys.
Click to expand...
Click to collapse
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
victoradjei said:
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
Click to expand...
Click to collapse
do you know how to hide the connection icon in system tray when sync? it waste me one row of space just for this icon....
Dopod has release a new U1000 rom. Just log on to their site and grab your copy.
Related
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
due to popular demand (my own really, hehe) and sanction from the man himself, here is a new thread dedicated specifically to Asukal's MUI projects for the Hermes, specifically the japanese X01HT. this is a spin-off of this thread: http://forum.xda-developers.com/showthread.php?t=284765 .
below, i've made a cliff-notes of sorts, with links to the various MUI related files within the original thread. the original files remain on that thread for the time being.
MUI relevant posts:
English MUIs:
http://forum.xda-developers.com/showpost.php?p=1077551&postcount=64
http://forum.xda-developers.com/showpost.php?p=1080864&postcount=116
http://forum.xda-developers.com/showpost.php?p=1081165&postcount=119
http://forum.xda-developers.com/showpost.php?p=1100956&postcount=195 *HTC-Z*
German MUIs:
http://forum.xda-developers.com/showpost.php?p=1078882&postcount=90
Security warning:
http://forum.xda-developers.com/showpost.php?p=1078954&postcount=97
http://forum.xda-developers.com/showpost.php?p=1079158&postcount=102
Remove Japanese 'Today' Items:
http://forum.xda-developers.com/showpost.php?p=1080487&postcount=115
English Soft Keyboard:
http://forum.xda-developers.com/showpost.php?p=1081257&postcount=122
http://forum.xda-developers.com/showpost.php?p=1082056&postcount=134
Japanese to English Bubble fix:
http://forum.xda-developers.com/showpost.php?p=1082823&postcount=141
Transcriber:
http://forum.xda-developers.com/showpost.php?p=1083600&postcount=148
http://forum.xda-developers.com/showpost.php?p=1083697&postcount=152
English Today Keys Fix:
http://forum.xda-developers.com/showpost.php?p=1108577&postcount=202
Info about uninstall/hard-reset:
http://forum.xda-developers.com/showpost.php?p=1109289&postcount=204
Terminal Services Client:
http://forum.xda-developers.com/showpost.php?p=1119779&postcount=217
Softbank MMS Program English Translation:
http://forum.xda-developers.com/showpost.php?p=1172374&postcount=257
http://forum.xda-developers.com/showpost.php?p=1172472&postcount=261
English Video Call Button:
http://forum.xda-developers.com/showpost.php?p=1089229&postcount=176
i'll try to keep this post up-to-date and either transfer the files or direct links to the files to this post, but for now, continue to refer back to that thread for nitty-gritty details. hope you all find this useful!
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
PLS DONT INSTAL or USE on Xo1H <Toshiba Device>
this is not compatible for Toshiba or any other device with WM6.
Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
Click to expand...
Click to collapse
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Click to expand...
Click to collapse
hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK )
i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,
and you can extract canbs with CAB manager (trial version is enough)
http://www.ocpsoftware.com
Good luck!
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).
one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...
tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Click to expand...
Click to collapse
i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)
Asukaly yours!
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)
also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)
Hello Asukal! I come to you again for help!
There are two things that I still have problems with while making English ROM Japanese friendly:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)
Thanks!
PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?
And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.
Really thanks for all!!
Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
Click to expand...
Click to collapse
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN
I didn't realize that could be the problem Thanks.
And thanks Asukal for LetsJapan x
sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
Click to expand...
Click to collapse
No idea about this?
sesaru said:
No idea about this?
Click to expand...
Click to collapse
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
mexec said:
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
Click to expand...
Click to collapse
sorry, i found this, and tested on my device.
not worked,
have to remake this,
PLS wait, but i am so busy this season, can not say when...
Asukal said:
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
Click to expand...
Click to collapse
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Click to expand...
Click to collapse
Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)
There is more thing to make my WM6 perfect, and also one question that maybe you can help me
-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.
-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)
Thanks a lot!!!!!!!!!!
Sesaru
This is essentially the excellent Korand 3.1, but with UC compatibility, enabling easier switching between ROMs.
UC info
UC allows customization using a storage card, and so allows for completely individual customization of any UC compatible ROM.
Without a storage card, this should run as it normally does.
For info on UC look here!
I'm currently working on a Touch Edition. I have a beta version I'm uploading. If anyone wants to test it, I'll post the link here.
Upgrade guide:
README
Dowload:
rapidshare
SkyDrive
TE beta 1
Thanks to:
Korand for the base ROM here
Sleuth255 for UC here and here
good to make UC compatible..
Good job ..
yup thanx for this useful post
i was wondering if i could find the wm6 uc compitable rom
Thanx
If you get any problems with UC please tell me so I can sort them... Or at least try to.
Thank you very much!
does this work for G3 and G4?????
I am interesting in the Touch ROM! Is this also based on the Final version of WM6.1?
does this work for G3 and G4?????
Click to expand...
Click to collapse
Should do. You need to download the update utilities linked in the How To.
I am interesting in the Touch ROM! Is this also based on the Final version of WM6.1?
Click to expand...
Click to collapse
It will be based on the same ROM, but with extra features like the cube.
l3v5y..
What here is, is not final version from Cloudyfa..
He has already dump the other one from kaiser.. And solved this WPA 2 problem..
But need to fixed something on SD Card bugs..
I downloaded the Touch ROM and I flashed it succesfully.
But during the ROM customization progress it is stuck on 'running SDautorun.exe' and does not continue anymore. I waited for about 30 minutes and soft resetted my device. The device starts, but now I have a very clean ROM (no sign off any Touch items).
Can anybody help me with this problem?
There are two reasons for this:
I didn't add a security pack that allows certain (unsigned apps) to be used.
The initflash file (what places shortcut files in the right place) was not edited properly and so shortcuts to apps are not in the correct place/not there at all.
hi l3v5y,
Happened to me the same thing. I can confirm that the shortcuts in my case are correct.
Questions:
1 - can I choose diferent folders for the cabs?
2 - Is the program case sensitive?
best regards
RP
For info on UC, see this http://forum.xda-developers.com/showthread.php?t=366337 if that fails to answer your questions I shall try to answer them myself.
I've been trying for more then a week now to get my next rom UC but it just will not work so any info on how you got it to work would be grate
does anyof it work? does sdautorun.exe start?
l3v5y said:
does anyof it work? does sdautorun.exe start?
Click to expand...
Click to collapse
yes it starts but does not end installing I tried putting the SDautorun on my sdcard and run it gives an error that it's not signed
gullum said:
yes it starts but does not end installing I tried putting the SDautorun on my sdcard and run it gives an error that it's not signed
Click to expand...
Click to collapse
It might need to add a key setting in reg:
SDAutoRun is not signed so security must be relaxed in HKLM\Security\Policies\Polices by setting the value 0000101C to a 1
check:
http://forum.xda-developers.com/showpost.php?p=1896885&postcount=1
ufriendxda said:
It might need to add a key setting in reg:
SDAutoRun is not signed so security must be relaxed in HKLM\Security\Policies\Polices by setting the value 0000101C to a 1
check:
http://forum.xda-developers.com/showpost.php?p=1896885&postcount=1
Click to expand...
Click to collapse
I did that but might have goten it lost again because I've changed lost of stuff I'll check it again and thanks
I had that happen, but at some point when importing a package, the error stopped.
If you take the SD card out, and then wait after a hard reset, it should reset.
This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
h4waii said:
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
Click to expand...
Click to collapse
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
ROCOAFZ said:
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
Click to expand...
Click to collapse
Let us know how that goes but also you can change
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1"
TO
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1" /nodelete
Thanks!
JZ
ROCOAFZ said:
This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Click to expand...
Click to collapse
Just make your cabs "read only" and then they won't get deleted. No registry edit required.
ok....
here's the deal:
I've been using an OEM-package in mylast roms for tomtom version 7.915.
This has been working without troubles.
Now I cooked a new ROM based on new 21018 XIP/SYS
The device really flies and everything seems to working flawless....EXCEPT tomtom.
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
I did not change anything to the OEM-package. So I guess it has something to do with the new SYS.
Do more people have this problem and/or does somebody now the fix....
Thnx all in advance for your help!!
Greetz Merten
p.s. I used the search function of course and saw a lot of similar errors but no sollutions.....
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
crazyC said:
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
Click to expand...
Click to collapse
I got the exact same oem-package working in M-rom v1.71!
So it really beats me why I get the error.
I tried cooking the rom again but still the error....
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
crazyC said:
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
Click to expand...
Click to collapse
Ok OEM can be found here in the map: packages
Package looks OK at first glance - hope to be able to try it tonight and will post back tomorrow with results.
If this doesn't work - you could try simply using the cab via UC etc as I do - I have checked and the cab of the same version in your OEM DOES work for me.
In fact, I think I might leave it in my UC, (but will flash tonight anyway with it just to see)
merten3000 said:
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
Click to expand...
Click to collapse
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
GenghisZ said:
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
Click to expand...
Click to collapse
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
merten3000 said:
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
Click to expand...
Click to collapse
Nope, did not help...
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
crazyC said:
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
Click to expand...
Click to collapse
I always change my roms pp to 32mb...can that make a difference? I did it in v1.71 and tomtom worked fine...
I don't know - I have been around here long enough to know that your skills far outweigh mine. If it used to work then I see no reason for the change.
All I know is that my rom is based on Da_Gs really clean latest (ie 5.08) from his simple kitchen thread (from his post near the end not the first post) plus Eras2rs package updates.
The only other packages I add are a few utilities and personal tweaks. I import an advanced config xml as part of the UC process but that just ensures the various settings in Advanced Config are set to advised etc.
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Harikoss said:
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Click to expand...
Click to collapse
Maps work(ed) fine..
btw I bypassed the error by removing the OEM-package and made it a cab which is installed during system configuration. It takes more system space but this way it is uninstallable....but it remains a mistery to me why the OEM does not work in this SYS and does in 21014 SYS...