finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
Related
Firstly, forgive me if this has been covered - I tried searching for this but didn't find an answer...
I'm trying to upgrade my Orange M1000 to WM5 and am worried that I'll totally destroy my machine, so I'm treading as carefully as possible.
I've been following the instructions from xda2jojo but came across something very quickly:
The instructions say to search for nb.nbf. I guessed this might be a typo (?) so I downloaded nk.nbf instead.
I went to patch it but I get an error: "Sorry, this file cannot be patched!"
Also, when in the ROM editor, there is no option for Orange - which should I use instead?
Am I being really dumb or is this a real problem?
Thanks
MkS
The Same Problem in TSM500
I also have the same problem
I tried to patch NK.nbf but it fails, showing the message "Sorry, this file cannot be patched"
I also tried to update my TSM500 without editing this file, but it doesn't seem to connect. And when it connects, it shows a message saying that tuere is a language error.
I used HimaGetDeviceData to get the language configuration, but un file "Devicedata.txt" there is only a "U" and nothing else. There isn´t language nor version number, nothing...
copy the file Devicedata.txt to your pc and open it there.
Use this Himaupgrade file that bypases country and telco identity
ftp://xda:[email protected]/Himalaya_SEs/HimaFiles/himaupgradeut_197.exe
I hope that this help...
Does that also get around the fact that the patch1.exe program claims that nk.nbf cannot be patched?
What this patch for ?
Sorry for question . What this patch for ?
I have no idea, but the instructions for upgrading to WM5 say you've got to patch nk.nbf.
I had the same problem
:arrow: I had the same problem ... so I did upgrade without patching .
By the way Sprite Back Up is not working .
Pocket Informant impossible to install .
Hi - get the same problem with the patch. Am treading carefully too to ensure i don't have an expensive paperweight.
Anyone know if the patch is mandatory or is the file linked via the wiki for w2k05 ROM already patched and ready to go and therefore need to skip this step according to the FAQ
Thanks
Finally updated
Finally I got my xdaII updated. I didn't patch nk.nbf, I only uploaded the file.
The xda started correctly, and after an hour since I updated it, I only saw that the buttons "camera" and "recording" (left side of tha xda) doesn't seem to work.
I think that the memory is too low. Maybe I chose a wrong version of WM2005.
Storage
Total: 14.57 MB
In use: 1.74 MB
Free: 12.83 MB
Program
Total: 24.35 MB
In use: 14.94 MB
Free: 9.41 MB
Anybody else have the same memory problem?
Thx
(Pd: Voice recording key only works when display is off)
patch NK.nbf but it fails
hi guys
I also have the same problem
I tried to patch NK.nbf but it fails, showing the message "Sorry, this file cannot be patched"
Can any one help us
tKS
Upgrade successful
I had the same problem. I did not patch and performed the upgrade. Everything works fine except the record and camera buttons. Vito Button mapper does not help either, but it does allow you to make the contact & calendar buttons multi-functional so they can replace the for-now missing buttons.
Good luck.
Who else to ask ?
I did PM to xda2jojo and I have no answer ? probably he is busy .
sorry to edit this....give me time to edit the procedure---xda2jojo
if you received the "Sorry, this file cannot be patched" error message ..
there are only two reason .. maybe you downloaded a corrupted nk.nbf ..
exact size of nk.nbf
1.50f.00WWE
is 33,554,496 bytes(32,769kb)
1.50f.blWWE (BuzzMobile 2005)
is also 33,554,496 bytes(32,769kb)
but if you think you downloaded it right and still receive this error ..
it only means that you downloaded a already patched ROM and no need to patch it anymore ..
just skip the procedures about patching the rom
and go directly to upgrading
now if you receive a country id Error .. just use modified Himaupgradeut.exe
read the wiki
http://wiki.xda-developers.com/index.php?pagename=Himalaya_2005
to know where you can get the file
Thanks
Thanks
That's cool - thanks!
Bugger - I had to go back down to 2003SE.
No MMS, no Messenger, and no working Activesync. It looked so great too. It was the MMS and Activesync issues that were key for me though. Will wait till a definitive fix is found and try again.
Thanks for your help, though, guys. If I hadn't tried, I'd never know.
Messenger works OK on mine. Activesync works OK on my laptop, but not my Desktop. MMS doesn't work though, yet.
same problem
hey ppl i 2 have the sameproblem my file size of nk.nbf is 32,769 kb is that ok i also do not ahve active sync 4 installe dnither do i have service pack 2 isntalled is it sensible 2 insatall or will it screw up myprecious xda2?plz let me kno asap
thanx
This is how i did it, works to the T 4 me (I Have A Zipped NK.NBF)
Step 1
Unzip From First Part, (It Should Automatically Unzip Second Part)
(Ignore this if you already have unzipped NK.NBF)
Step 2
Using WM2005patch1.exe Patch The NK.NBF File
Step 3
Using ER2003Edit Change The Country Code 2, O2 WWE
Step 4
Run HimaUpgradeUt.exe
Step 5
Once All Installed Reboot Fone And Run ExtROM_WM2005.cab,
ExtROMUnlocker(for_WM2005Only).cab And BuzzWM2005RAMDisk-Full.cab
2 unlock hidden memory!
(Shows 124mb Ramdisk & 15mb Storage formaly known as ExtRom)
Not sure if there is updated ramdisk or not...
My activesync 4 works flawlessy With Win XP Service Pack 2,
MMS Doesn't Work For Me Either,
I have downgraded back 2 wm2003se for this reason...
Well just untill Someone gets it running again...
Good Luck, & Ave Fun! The general layout onWM2005 is great.
Hi to everyone.
Before this HTC device I had others and also had a Motorola Mpx220 (WM2003 SE).
I was used to move the files within "\Windows\Start Menu" (mostly .lnk files to installed programs) into newly created subfolders, to be able to use and/or access the function I needed in a faster way.
I've tried doing the same on this WM5 device, but everytime I try I get an error message reporting it is not possible (File Explorer has greyed out options to cut and/or copy, while TotalCommander just reports it's not possible to "overwrite" ???).
Does anyone have an idea of how this can be done (registry ???) ?
Thank you.
Ciao
Here is the solution...
Hi Mix, it's Mix answering (yes, I'm the same person...)...
First of all I would like to thank you ALL the people which knew the solution and were fighting to answer to my doubt...
You were so many, I wonder why the message has been read times and so many answers arrived: 0 (yes, ZERO).
Anyway, I came across the solution myself, by chance...
The problems seems being the smartphone versions of WM5 being protected against file modifications. This protection extends also to some files execution and to certificate installations (hence some problems may arise when connecting to an Exchange Server for syncronization).
Some tools are needed to remove this protection, and some experience of registry modification is required too (I will not help anyone beside what is in this message and I take no responsability for any mistakes and/or troubles you may produce or face).
First of all you need a special version of RegEdit (the tool from PHM): you should find an HTC digitally signed copy of it called RegEditSTG.exe.
Look around for it: there are many forums around which do hold a copy of it.
Place it in your phone's memory, not on the MicroSD card...
With this tool you should change the following values:
HKLM\Security\Policies\Policies\00001001 = 2 => 1 (RAPI)
HKLM\Security\Policies\Policies\00001005 = 16 => 40 (Cert)
HKLM\Security\Policies\Policies\00001017 = 128 => 144 (?)
The first is the value you will find, the second is the value you should enter. The third line has a question mark because someone says it should be made, someone not... It's up to you. I made it.
Then you should find another tool (with the same above method) called SDA_ApplicationUnlock.exe which has to be run on your desktop PC with the phone already connected with USB (and possibly with ActiveSync not in the middle of a sync...).
Once you run this, you will get a message that the unlock took place (if not, it may be the first operations did not complete well).
Disconnect your phone from the USB cable and power cycle it (switch it off and then on again).
Opla'... the phone is not APPLICATION UNLOCKED and you will be able to move file around the directories as I was looking to when I first posted my message.
Now I have a very quick Start Menu, as I wanted.
Please, be aware that this operation hacks the security policies of WM5 and then any other application which may be dangerous can now run on your phone.
If you wish to stay on the safe side, it could be useful to restore the registry settings to their original values, but I do not know if this could cause other problems, since I didn't on my phone.
I actually double check every single file by myself before launching it and I do not run anything which I'm not sure it is safe.
So, pay attention... (you have been warned...).
Hope this helps someone else out there.
Ciao
Thanks for the tips mate! I was searching around for the same problem.
Can a hard reset put all the files back as in the old WM2003? I'm asking that 'cause if you look at the windows directory, many exe and dll files are repeated, with a different code. I guessed they are for the many different languages the phone support and the code is the country code. Maybe when you switch from one language to another those files are renamed so you have the correct exe and dll for the language you need...
If I can erase all the files I don't need (I will never change the language or maybe have only italian and english) I can save lot of space.
Am I wrong? Was that ever tried before?
vbi said:
Thanks for the tips mate! I was searching around for the same problem.
Click to expand...
Click to collapse
;-) I knew...
Can a hard reset put all the files back as in the old WM2003? I'm asking that 'cause if you look at the windows directory, many exe and dll files are repeated, with a different code. I guessed they are for the many different languages the phone support and the code is the country code. Maybe when you switch from one language to another those files are renamed so you have the correct exe and dll for the language you need...
If I can erase all the files I don't need (I will never change the language or maybe have only italian and english) I can save lot of space.
Am I wrong? Was that ever tried before?
Click to expand...
Click to collapse
In order:
- Yes, I suppose a hard reset of the device completely restores the original factory settings, hence, the device will appear as "brand new".
- You're right: all the localized files present there are just to be able to swithc to other languages (maybe following user's settings and maybe also following user's SIM settings too...).
- Erasing the unused files may appear as a "space saving" job. It is not. First of all you will not be able to remove ROM resident files, but provided you could be able to do this, you will not be able to use ROM space as you intend...
Finally then, it's completely unuseful to try to remove them, just a waste of time trying...
Ciao
Thanks Michele.
Are you sure the windows directory is in ROM?
I always tought ROM was only to store the "disk" image when you hard reset the device. I was so for the Qtek S100.
vbi said:
Are you sure the windows directory is in ROM?
Click to expand...
Click to collapse
Yes it is. On the fact that it is then copied into RAM, well, this is a tecnique which was used up to WM2003 SE devices.
Starting from WM5 devices MS somewhat changed the behaviour of the whole system, hence I'm not then so sure.
Indeed, I have never been sure of anything, beside death, so you can imagine...
I'm not really so "expert".
Having used an MPx220 for over one year (with all its limitations, but exploiting it very much), using a WM5 device now is a much more relaxed experience (faster, more realiable and less troubly in terms of memory).
Just MHO
Thanks Mix - i followed your directions and it worked.
Got my QTEK (running i-Mate ROM) Application Unlocked
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also wu5262 and ahmadfarid for testing.
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Buch070 said:
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Click to expand...
Click to collapse
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
faisal.husain said:
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
Click to expand...
Click to collapse
OK, I will try.
Buch070 said:
OK, I will try.
Click to expand...
Click to collapse
Please keep us posted
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
faisal.husain said:
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also WU3562 and ahmadfarid for testing.
Click to expand...
Click to collapse
Finally it's out btw faisal, you keep getting my name wrong, it's wu5262 not wu3562 not a big deal really, thanks for the hard work
Sorry mate will correct, I suffer from dyslexia
Buch070 said:
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
Click to expand...
Click to collapse
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
faisal.husain said:
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
Click to expand...
Click to collapse
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Buch070 said:
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Click to expand...
Click to collapse
Yes I have tried to install true vga, it is a bit flakky on my dopod with or with out the english. However what i found was after soft booting a couple of times it kinda of worked.
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
victoradjei said:
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
Click to expand...
Click to collapse
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
faisal.husain said:
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
Click to expand...
Click to collapse
Ok will do that in a few hours time. Currently out with the kids
victoradjei said:
Ok will do that in a few hours time. Currently out with the kids
Click to expand...
Click to collapse
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
faisal.husain said:
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
Click to expand...
Click to collapse
Seems that most of us is not that young already
ahmadfarid said:
Seems that most of us is not that young already
Click to expand...
Click to collapse
Maybe that is the reason why we can afford such expansive toys.
TrayApplet alignment
Buch070 said:
Maybe that is the reason why we can afford such expansive toys.
Click to expand...
Click to collapse
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
victoradjei said:
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
Click to expand...
Click to collapse
do you know how to hide the connection icon in system tray when sync? it waste me one row of space just for this icon....
Dopod has release a new U1000 rom. Just log on to their site and grab your copy.
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
Hi everyone. Just wondering if there's any possible (preferably free) way to get other language packs/fonts on the mogul. I was looking a japanese website and got frustrated when 90% of it was in block form....=(
Any help would be appreciated. Thanks in advance.
You want type/read Japanese on your mogul? I am a Japanese, so I can help you
First, do you cook your own ROM or do you use pre-built ROM?
If you cook your own ROM, this method will be far more stable:
Method 1 (stable) (designed to work only with dcd kitchen...)
Extract WinCENLS_WWE.zip to your kitchen's SYS directory, overwriting the WinCENLS_WWE directory and all the files inside. Make sure wince.nls was overwritten or else you will fail.
Extract Localize_Japanese.zip to your kitchen's OEM directory, and when you go to build a ROM, ensure that "Localize Japanese" is checked in BuildOS as an option under heading "Localizations" (it should be at bottom).
If you have any failure about SIP, hive file, etc... please don't continue and tell me about your trouble and we can go from there. This will NOT work with any other software that make use of SIP type "IME" like HTC xT9 IME keyboard... make sure only one "IME" type software will be installed.
Now, I can't make the IME.cab file into an OEM package. I tried, and fail. If you can make an OEM of it that will work by dcd and other files in the localization, great - and please send me a copy! But, I don't think it can work right now. Anyway, after burn this new ROM to your Titan, launch IME.cab through your SDconfig.txt file.. that way, everytime hard reset will happen, you will not have to think, "Oh, I need to install IME before I can use my phone."
Files:
Localize_Japanese.zip
IME.cab
Alt WinCENLS_WWE.zip location
Method 2 (unstable)
Install asukal's version of this by making use of his program called usemynls.exe which patches wince.nls to another wince.nls from a ROM already built with the 0409 version of the file. This causes system instability and often times you cannot send or receive more than 2 or 3 text messages without causing the machine to need a soft reset. It's highly annoying and not at all correct. But, it works - sort of.
Here is files:
AsukalLetsJapanNo6
IME
Goodluck with method 2 if you do decide to use it...
arigatou gozaimashita!
kondo ROM-wo cook suru toki, Method 1-wo tsukatte-mimasu!
Thank you very much for the info, illuminarok. I'll see if i can make an OEM and get back to you. Thanks again!