Unit powers off but wont come back on (Have to soft reset?) - MDA II, XDA II, 2060 ROM Development

Hey Guys,
Using 2.06 SE ROM, 1.18 Radio and whatever extended rom you like (even a blank extended rom), whenever I press the power button on my device, or if it turns itself off after the default 3 minutes, it wont turn back on!
It turns off, the green light keeps blinking every few seconds...but when I press the power button the screen stays black and the green light stops blinking. I have to soft reset the device to turn it back on.
Strangly enough if someone rings the phone it will wake itself up.
It doesnt exibit this problem when in the cradle.
Regards,
Jez.

Hi! i have this same problem:
http://forum.xda-developers.com/viewtopic.php?t=13789
i hope this weekend correct it.

Hmm...this is so weird.
Ive just taken everything out of the extended rom, and hard reset. The problem went away (i can power off/on fine, with or without cradle. I can now leave the device for 3 minutes so it powers itself off, then power it back on with no problems).
I then put all the cab files back in 1 at a time until my extended rom was identical to before (when I had the problem)...and guess what...still no problem. I dont get it...

Related

Locked up SGP5.0

I was in File Expert this morning, about to back up my apps, and my screen locked up (I was just checking apps to BU, had not started it yet). The only button that works is the on/off, but it only turns the screen on and off. No power down, no back, no settings, nothing. SPG5, so can't do a battery pull (what was Samsung thinking?). I thought maybe my battery went to zero, but I have it on a charger now, still just screen on or off. Is there a reboot sequence?
HELP!
edit: Sorry for the panic. I discovered that if I looooooooong press the power button, it finally rebooted. Not like a typical power off, a hold for 5 seconds; this took a hold of at least 30 seconds. Screen did nothing for a while, then turned on, then turned off and rebooted. All is back to were it was...

[Q] Unrooted/stock HTC One bricked? QHUSB_DLOAD

So my HTC ran out of battery last night, and I left it overnight to charge (red light was showing up).
So I turn it on this morning, and nothing happens. I unplug it from charger and red light is still on, and when I held down powerbutton the home and back buttons would blink, but phone would not come on.
So I read online and tried the home+vol button trick under a bright light and the red light did go away, but nothing else happened.
Now when I press power button nothing happens, not even the home/back button come up.
When I plug it in to the computer I see a driver for QHUSB_DLOAD failing to load. And if I hold down power button and volume while connected to PC, I can hear it "unplugging and replugging" noise from pc.
So is my phone bricked? This was NOT rooted, it was simply the stock device.
I really just want the pictures I have on there, is there any way to get that data back?

[Q] Need help for my SGS3 (latest cyanogenmod on it)

Hello everyone,
I'm a newbie at rooting.
I have used CM for 3 months but for a week it got a little strange.
Scenario 1) When I push the power button to get to lock screen, the soft buttons' light turn on for a moment but no change happens on screen. I push power button again, the same result. No other respone from my mobile. If I push power button for 10 sec to reset, i see a little green or purple light beam from the bottom right. After a while, it disappears. And still no response. I remove the battery as a last resort and put it back, when I push the power button, it's the same. Little colorful light beams...
Scenario 2) A short time ago, while I was playing a game on it, the screen just turned off and I pushed the power button... as you guess, the story goes on the same way.
It's now off, I couldn't get to it in any way.
What can I do to solve and how?
You guess it's urgent.
Sorry for my poor English, thanks in advance.
Can you restart the phone in download mode, or recovery mode?
I just figured out something:
The phone turned on and I disabled developer settings. After this, when the screen is locked and off and I push the power button, I see nothing on the screen (maybe a little purple or green beam at the right bottom) but the soft buttons turn on. I slide right to unlock without seeing anything, I pass the lock screen and it's now open. (when I touch the screen, the soft buttons turn on again and again as it should be) I just scroll the main pages right and left, push the volume or main button, they work. (it beeps when the sound is max) after 30 - 40 seconds... yay! The screen is on! It's totally the same all the time. It needs time to turn on?
Is it a software problem or is my screen about to break down?
Thanks again!!
it's a software problem. You can either factory reset, run the trim command if you're running android 4.3, or change to a different ROM.

Samsung Galaxy TabS SM-T705 after the screen turns off, it runs on by pressing random

It all started 2 days ago, when watching a clash of clans replay the screen turned off for the energy saving thing. I pressed the power button to bring it back, but the screen didn't turn on, i could hear the game sounds, and the touch screen was working, after the replay ended i was able to tab the buildings in my village and hear the sound they make. I pressed some random combination of buttons, i think its power+volume down and the screen turned on. It happened a second time during that day, and i was able to turn the screen on again. But the day after that trick didn't work and the tablet was stuck with a black screen.
I tried a factory reset, but the menu for it wouldn't appear, the odin menu by the other hand worked fine. The recovery menu should appear when with the tablet turned off you press volume up + home + power in that sequence, and releasing the power button at the samsung logo screen. But the menu never appeared, so i navigated it blindly and i think i managed to reset it, at the next accension i was prompted with the personal information field, name, google account, time settings etc..
The phone started again, with all default settings, and all my files where gone (so im assuming the factory reset worked) but when the screen turns off it doesn't come back by pressing the power button, it comes after trying a few combinations (and again i think it is power + volume down and wait a few seconds).
So im worried it was all in vain, also the screen brightness is bugged, and changes the colors, the become reddish with low brightness and some colors disappear.
Edit: After i let the screen turn off for the third time today, it doesn't come back on. So im back at the black screen...

Galaxy Tab S3 (SM-T820) Black Screen (even after factory reset)

Good evening folks,
I am in need of help. I've been having issues with my tab S3 (SM-T820) for the last month or so. I notice that when i let the device charging over night, after i disconnect it, the screen goes black. I know the device is on, since the button lights are active. I've performed forced reboots (holding power + volume down buttons), and screen remains black, but device is on. I've performed hard resets via the odin software and the firmware, and yet the screen remains black (again, device on, button lights on). If i connect the device to a charger, when the screen is black, the screen turns starts displaying a black "speckled" display (black screen with color dots everywhere). When i see that, i start pressing the power button, turning the screen on and off continuously, until i finally get the screen to appear. Problem is that once i turn off the screen (not the device), again the screen will go to black and not appear anymore, until i keep messing with the power button again. I'm finally at lost since i sent the device to squaretrade for warranty support, and they keep sending it back as repaired (all they did was a factory reset, which is what i have done via the Odin software). Any idea on what to try next? I have though about disassembling the device and verifying the display cable is correct, but just seems irrelevant that it could be a hardware issue since eventually the screen does come on again (after trying countless of times), plus, i don't know how to disassemble this thing. Any ideas or recommendations?
Thank you in advance

Categories

Resources