Related
Hi all I've tried PPC2003 from Jeff Summer Kitchen with 4.00.11.eng ver Rom basic. After I tried to install several software back I notice it is quite a lot of nice software won't work normaly in PPC2003PE. Because I'm only a regular user I just want to share several story of my own. And Tips from all of you guys if you have the problem solver.
1. Caller2Picture: Can be installed, but won't wok with all contact. Very strange only several contact work with this software
2. Omega baterry pack 2003: Can be installed, work well. But if you select the mode tap 'x' direct close program and do soft reset after it the software will crash. You will get back only untill first bootdisplay and nothing happen after all.
3. Pocket Plus: Can't be installed in PPC2003PE at all.
NB: I think menu for direct close program with tap 'x' icon very usefull for us. Because it reduce the risk of run out memory in our device. But as far as I get there is NO other alternatif software that can do this in PPC2003PE. If anybody could give me a tips I'm very thankful.
1: Caller2Picture only works if the caller is sending his/her ID along.
2: Don't use this.
3: A 2003 update of PocketPlus is out and works fine.
Wow...., thanks Leo.
But Imean the bug from caller2picture is you only can assign picture and ringtone to random contact name only not all from contact name means that if you try to assign the picture and ringtone to certain contact the "caller2picture" couldn't recognise the contact that we have. In the name bar will appers none and contact number blank. Not as usual, the contact name automaticly appears on the name and the contact number will show all, if we have more than one phone number for the contact in our list.
:?
That what I was mean
Blackcatz said:
2. Omega baterry pack 2003: Can be installed, work well. But if you select the mode tap 'x' direct close program and do soft reset after it the software will crash. You will get back only untill first bootdisplay and nothing happen after all.
Click to expand...
Click to collapse
My experience exactly. I'm a fan of several battery pack features. I use the PocketNav available on the Kitchen to replace some of the menu/program closing utility of Battery Pack, but still liked Battery Pack better overall.
Clearly there's a conflict if you have both PocketNav and Battery Pack 2003 installed at same time... Tried this and they both occupy the same space on the menu bar and fight with each other for control. Are you running both, or did you find that Battery Pack did not work, even in the absence of PocketNav?
But Imean the bug from caller2picture is you only can assign picture and ringtone to random contact name only not all from contact name means that if you try to assign the picture and ringtone to certain contact the "caller2picture" couldn't recognise the contact that we have. In the name bar will appers none and contact number blank. Not as usual, the contact name automaticly appears on the name and the contact number will show all, if we have more than one phone number for the contact in our list.
That what I was mean
Click to expand...
Click to collapse
Dear,
I found similar symtoms mentioned. Here is what I did to get around the problems
1. Try alter some details in the contact that the program does not recognize (i.e. shorten the name of the contact, etc.)
2. Ignore the "None" sign and manually type in the phone number of the contact yourself. This has limitations, though works pretty well with the incoming calls that normally not supported by the prog. That is you cannot work with more than one number/contact.
Anyway, I always prefer the second getaround. It works pretty fine except for the shortcoming mentioned
HTH
Ken
MS Money 2003 doesnt work on WM2003, I find that kind of funny.
[email protected]
I have no problems with omega one battery pack 2003...
but there isnt any sound heh...
I dont have pocket nav installed... prefer batterypack mucho
boomerdogg said:
MS Money 2003 doesnt work on WM2003, I find that kind of funny.
Click to expand...
Click to collapse
Dear,
If you wish to use MSMoney on your wm2003 platform, here is my recommendation
1. After the installation, your device will show "incompatibility" sign, do NOT press ok at the warning sign
2. Use your Pocket Explorer to locate the .CAB file of MS Money (can either be in the device or in SD Card, depending on what you choose in the first place)
3. Use .CAB installer to install MS Money onto your device
4. After the installion, press OK at the waring sign.
5. Here you go
HTH
I tried that, but when I try to run the cab file I get an error message telling me it cant find the file. I know its there because I just clicked on it.
boomerdogg said:
MS Money 2003 doesnt work on WM2003, I find that kind of funny.
Click to expand...
Click to collapse
- yeah, that was talked about on the other PPC boards...appearently MS wants you to wait to get Money 2004... :roll:
Hi everybody,
i just installed SPB pocket Plus 2.2 software on my MDA2... after installing a previous version (i guess but i don't remember which one).. i realised that on the today screen i cannot choose anymore to view the "Storage Card" icon... anybody can help about this?
nobody has the same problem?
Anonymous said:
nobody has the same problem?
Click to expand...
Click to collapse
Use SRS to see the entire today, SPB+ sometimes cuts some part of todya
I am using sbp Pocket Plus 2.0 and did not face such a problem, I am not aware about version 2.2!
Hi dNuOs,
I've got exactly the same problem - I've emails Spb about it, but no answer yet.
Also missing Storage Card
Current version: 2.2 build 1649
URL http://www.spbsoftwarehouse.com/downloads/pocketplus/SpbPocketPlus2_setup.exe
Date 10/29/04 16:53:52
Size 1138228
Download date: 11/02/04 11:19:16
Only see main memory, So nothing about my Storage Card
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Then tap&hold on the tab where you want the icon to appear, choose add/remove items and you will see Storage Card 1 Indicator, it can be enabled and will then show on the today screen. No problem.
I found that you can use this method to add multiple instances of the same indicators if you want.
NOTE that if you did not move the backupbattery icon to postion 1, then you will have to edit the string value at the appropriate position, it will be one the values 00000-00004
Cheerio
Thank you
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Cheerio
Click to expand...
Click to collapse
Great...
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Then tap&hold on the tab where you want the icon to appear, choose add/remove items and you will see Storage Card 1 Indicator, it can be enabled and will then show on the today screen. No problem.
I found that you can use this method to add multiple instances of the same indicators if you want.
NOTE that if you did not move the backupbattery icon to postion 1, then you will have to edit the string value at the appropriate position, it will be one the values 00000-00004
Cheerio
Click to expand...
Click to collapse
Mate, you're just great!!! It works perfect, thanks for your support.
Just one question... how you managed to do this? I mean, how did you know the correct name was "*storagecard", just checked on a previous version of the software i guess...
thanks again
Heh heh, glad it's working for you guys.
I knew that the name would be storagecard, just from the formatting of the other names, I took a gamble I guess but I had a good idea it was correct. :lol:
Cheerio
Howard
dNuOs said:
Hi everybody,
i just installed SPB pocket Plus 2.2 software on my MDA2... after installing a previous version (i guess but i don't remember which one).. i realised that on the today screen i cannot choose anymore to view the "Storage Card" icon... anybody can help about this?
Click to expand...
Click to collapse
This is not an error, it is a precise will of SPB.
When I wrote to them because of a problem of my version 2.1, they told me that on some machines this option created hard resets :shock: , so they decided to move it out in some following release. And here we are.
Well I've not had any hard resets, and I wanted the feature, mostly for appearance sake, as three small icons did not fill the width of the screen but four do!
I can image senarios that might cause problems with this icon, but it's down to programming, if SPB refresh the states too frequently, it will cause a performance overhead, and with any additional cards it causes i/o to check capacity.
There's no setting to adjust the refresh interval, but as I said I've not had any problems, and I did not see any release notes that talked about the removal of a feature!
Cheers
hshortt said:
Well I've not had any hard resets, and I wanted the feature, mostly for appearance sake, as three small icons did not fill the width of the screen but four do!
I can image senarios that might cause problems with this icon, but it's down to programming, if SPB refresh the states too frequently, it will cause a performance overhead, and with any additional cards it causes i/o to check capacity.
There's no setting to adjust the refresh interval, but as I said I've not had any problems, and I did not see any release notes that talked about the removal of a feature!
Cheers
Click to expand...
Click to collapse
I agree with you, but this is what PocketPlus product manager told me
Of course they are not willing to advertise a loss of functionality, at least until they find another solution...
OOPS-It was me
Anonymous said:
I agree with you, but this is what PocketPlus product manager told me
Of course they are not willing to advertise a loss of functionality, at least until they find another solution...
Click to expand...
Click to collapse
New version 2.2 build 1650
URL http://www.spbsoftwarehouse.com/downloads/pocketplus/SpbPocketPlus2_setup.exe
Date 11/09/04 20:00:07
Size 1136277
Download Time 11/13/04 00:22:31
Pocket plus incompatibility on IPAQ h6365/h6300/h6315
hshortt said:
Ah ha! So yes there are other people with this problem. I too had it and here's how I fixed it.
Firstly, enable the backup battery icon, move it too position 1, i.e. the first icon on the today screen.
Then use a registry editor and go to
HKEY_LOCAL_MACHINE
Software
Spb Software House
Pocket Plus
Today Items
Pannels
00000
Modify the 'Action' string and change *backupbattery to *storagecard
Click to expand...
Click to collapse
I install spb pocket plus 2.2 on iPAQ H6365, I realized a few problems been encountered. I sent a text message to someone, but he could receive the same message for up to 5 times intermittently, I won't realized that till the party mention it.
I'm not sure if you'd also know the remedy for this sickness
The fix to this has been posted several times on other threads, but all you have to do is add an exclusion to the "close button" enhancement for tmail.exe.
tmail.exe is closing before it's getting chance to send the whole text properly and is sending it more than once.
You should also be careful with enabling the SD card monitoring feature - it appears to be this that is causing the xda2 to lock up/die with no option to fix but to hard reset/remove battery (not spb's fault, it happens with other today plugins too). Apparently it's the hardware - this is why spb removed the functionality.
You may think it's running ok, but please don't be using your xda for anything life critical (e.g. mapping out someone's brain operation). Mine was fine for two months before it started displaying this behaviour!
rgds,
Alex.
That little fix for restoring the SD card monitor was mine, and when I looked SPB are now claiming that it may cause lockups on ROM Version 1.60
I'm on 1.72 and with this fix and SPB 2.2 I've no problems. Something about this issue could be done by SPB, one solution would be to include a refresh timer, aka Battery Pack. The issue with lockups can occur when the request for capacity is sent to the expansion card. This could happen when there is i/o on the card and thereby cause a possible problem.
All that said, I've *never* (yet!) had a problem with SPB 2.2
Thanks
Howard
NinjaDonkey said:
The fix to this has been posted several times on other threads, but all you have to do is add an exclusion to the "close button" enhancement for tmail.exe.
tmail.exe is closing before it's getting chance to send the whole text properly and is sending it more than once.
Click to expand...
Click to collapse
NinjaDonkey, thanks for the guide on this, I just did the "Exception" on tmail.exe, with spb pocket plus 2.2. But do not know yet if problem would persist, guess wouldn't be.
Do you know whether it's using lots of memory in the today plug-ins as we customize to display many programs on the today screen? You know those with Main, Connection, System, etc... Especially in the system, it's by default been customized to display quite a few of programs/system programs, would this be a factor to slow down or cause a hang on the ppc? If your answer yes, then i guess i am going to remove those of un-needed ones.
Hi Guys!
First of all thanks to all the folks out there who posted these ROMS etc. Keep up the good work.
Like to share my experience with the upgrade from 1.72.00 WWE / 1.14 to 2.06.00 WWE / 1.18.00. My bootloader is 1.03.
1. The update went smooth using step by step instructions by DCS and Mystery Man's ROM file (it gave an error at first '...cannot continue the upgrade. Restart the PDA and reconnect...' which I did and it worked fine from there on. I upgraded again a second time and it worked fine at first attempt.
2. The applications are all working although some icons/shortcuts have disappeared:
a) The File Explorer was there initially but after some time (or probably after installing some package) it just disappeared. I have installed the FREE Pocket Explorer in its place although I still wish I could restore the original. Any ideas? :?
b) I can launch Contacts from Phone application but there is no icon/shortcut for it anywhere else. It is not even available in Assign Buttons application and thus I have assigned Photo Contacts instead to the button. :roll:
c) Similarly Calendar items are available in Today screen and opens the calendar but the icon/shortcut is not available anywhere. Not even in Assign Buttons. :roll:
d) The Bluetooth connection icon in Taskbar is not available. Although the properties can be handled through Start->settings etc. :?
e) Camera does NOT work smoothly in Landscape mode. Well, its a bit tricky. If I first switch to Landscape and then turn on the camera, it opens in portrait mode. Now if I click the Contacts button, it switches to landscape. Good enough for me tough.
I will post more comments when I have more experience with SE.
Meanwhile, I will appreciate any help regarding the problems I am facing. :!:
Cheers!
Please make sure that your device is cid and sim unlocked before installing the rom - http://forum.xda-developers.com/show...80#post1354180 Also put your device into bootloader manually by pressing the camera button and softreset at the same time
Ok first I just want to say thanks to eaglesteve for helping me test new BT stacks however, I was unable to get a bt stack that would do file transfer to and from phone or laptop and still have it work for bt headsets. I should point out that the bt stack that is in there does work just not for everything some of the files are from the diamond and some are from ap4 and I personally have tested using BT headphones, BT mouse and BT keyboard all at the same time and it works pretty well. I also want to thank ervius for helping me with xip porting and to cmonex for helping with anything I needed help with and thanks to Anunnaki for the animated startup and anyone else I forgot about
I added new splash screens that are in line with the startup theme from my last rom, hope u guys like as I did it myself
Ultra Vanilla: build 19521.1.1.0
added total commander over file explorer
removed stuff from cpl reg
added custsk to config.txt
fixed welcomehead startup
switched band to auto
changed quickgps reg settings to 7 days
changed default phone skin
enabled autotimezone
added tcpmp and all plugins in place of wmp
added easy config for wimp with hardrest option (will be explained in download folder)
Of course this is a uc compliant rom if you are unfamiliar with this then click on the link to find out how to make a sdconfig.txt file so all your apps are loaded automatically http://forum.xda-developers.com/showthread.php?t=366337
I have removed about 22mb of stuff but I kept all the reg settings and intflashfiles.dat settings also. So if you want to add any of that stuff back into the rom just copy it to your device and it should work.
There are no screen shots as this is Ultra Vanilla so there is not much to show off
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
SPL 1.2
Megaupload: http://www.megaupload.com/?d=JUMZDFSC
RapidShare: http://rapidshare.com/files/124525912/irus_ultra_vanilla.zip.html
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SPL 3.5
Megaupload: http://www.megaupload.com/?d=WIHKNYO2
RapidShare: http://rapidshare.com/files/124540958/irus_ultra_lite_spl_3.5.zip.html
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
this should have just about everything you can think of. file size is 113.13MB enjoy
Addons - http://www.megaupload.com/?d=1PNOJ4GM
=========RESERVED1=============
=============RESERVED2================
incredible!!!
thanks for sharing.
do you know about registry editor from total commander? Looks is not included
looks the button assignation for networks is lost (right side, over power button)and commmgr.exe is not present
Irus,
I just installed it and have the following questions/concerns:
1. I can't find comm manager so I can't turn on wifi.
2. My previous taxis/irus rom did not have any keyboards installed and I liked that about ultra-lite.
3. no real vga to alter dpi (can I install this separately?).
apap said:
Irus,
I just installed it and have the following questions/concerns:
1. I can't find comm manager so I can't turn on wifi.
2. My previous taxis/irus rom did not have any keyboards installed and I liked that about ultra-lite.
3. no real vga to alter dpi (can I install this separately?).
Click to expand...
Click to collapse
different people use different comm managers so i left it out
i kept default keyboard so people could choose their own
you can install that yourself
Ok.
Could you (or someone) point me to a comm manager and the realvga software to download.
Thanks!
apap said:
Ok.
Could you (or someone) point me to a comm manager and the realvga software to download.
Thanks!
Click to expand...
Click to collapse
im so sorry i forgot to add a addons package. i will do that tomorrow it will have almost everything you can think of.
Camera
Does the camera work on SPL 1.2 ??
hammermedia said:
Does the camera work on SPL 1.2 ??
Click to expand...
Click to collapse
it should, it does for me
I am uploading the addons it will be posted in the post 1 in about 5 mins
beginner said:
thanks for sharing.
do you know about registry editor from total commander? Looks is not included
looks the button assignation for networks is lost (right side, over power button)and commmgr.exe is not present
Click to expand...
Click to collapse
the comm manager is located in the deleted folder just copy it along the other files that are assoiated with it to the windows dir and it should work
GPS is good this time. Cold fix took 1 minutes and 44 seconds outdoor under clear blue sky. The same spot that I stood when I tested the Chinese ROM, which incidentally took more than 6 minutes. But Sprite Terminator still does not work. I think it does not work in WM6.1 period. With Wm6.0 it works.
Noticed an error when trying to navigate to bluetooth folder.
Also, it is strange that a number of my application acquired a generic icon for the application rather than the proper icon. Does anyone else have this problem? Edit: icon appeared after a soft reset.
Still installing application, but it feels fast. I think you have a winner here.
eaglesteve said:
GPS is good this time. Cold fix took 1 minutes and 44 seconds outdoor under clear blue sky. The same spot that I stood when I tested the Chinese ROM, which incidentally took more than 6 minutes. But Sprite Terminator still does not work. I think it does not work in WM6.1 period. With Wm6.0 it works.
Noticed an error when trying to navigate to bluetooth folder.
Also, it is strange that a number of my application acquired a generic icon for the application rather than the proper icon. Does anyone else have this problem? Edit: icon appeared after a soft reset.
Still installing application, but it feels fast. I think you have a winner here.
Click to expand...
Click to collapse
to be honest i noticed better gps fix but i thought it might be tomtom7 as i got a cold fix in under 5 min from in my house and did not use quickgps. so glad to here its not just me. also i know about BT problem i was trying to get the ms stack and the other stack that you tried that worked on file transfers, to coexist but no luck. glad you like it
Truly admire your passion, will only possible to test your latest on week-end.
irus,
I thought you had WIMP cooked in, but can't seem to find it.
Your spalsh screen is nice. The only thing I'm uncomfortable is the fact that you advertise to the potential thief how to do hard and soft reset. I'd rather that info be extremely difficult for the thief to obtain.
Cheers.
I wonder if it is just me. I noticed that occasionally the device seems to refuse to reflesh /update the screen, showing completely wrong info and image. For example, the icon of application often does not get instantly updated after an installation. When I was using my eWallet, when I click on the Field tab, it is not showing the screen for that but from whatever was left behind just before this. Some strange behaviour.
There is something strange with some drivers i think.. TT6 (i've installed the common application for anu LITE rom) screen refresh is very slow, changing menus I see a "fading" slow effect and a sloooow refresh rate. (you used net cf 3.5 right?)
Other suggestion
1)I will suggest to remove customer experience
2) Default sounds aren't working
3) too many SIP, they waste resources and memory
sergiopi said:
There is something strange with some drivers i think.. TT6 (i've installed the common application for anu LITE rom) screen refresh is very slow, changing menus I see a "fading" slow effect and a sloooow refresh rate. (you used net cf 3.5 right?)
Other suggestion
1)I will suggest to remove customer experience
2) Default sounds aren't working
3) too many SIP, they waste resources and memory
Click to expand...
Click to collapse
I think so too. The refreshing of screen is not functioning normally.
Anyone having problem setting up email accounts and connecting to them? I took several attempts before I managed to set up email account. It did not see the service provider I had set up before. My service provider was strangely not on the pull down list when I tried setting it up manually. Later, after it was set up, attempt to download mail results in something to the effect of invalid settings for connection.
eaglesteve said:
irus,
I thought you had WIMP cooked in, but can't seem to find it.
Your spalsh screen is nice. The only thing I'm uncomfortable is the fact that you advertise to the potential thief how to do hard and soft reset. I'd rather that info be extremely difficult for the thief to obtain.
Cheers.
Click to expand...
Click to collapse
that is a good point, i can redo it and give wrong info they keep hitting the ok button with no success
FIX NEEDED TO COMPLETE COOKING OF ROM
Hello everyone,
After trying every and I mean every beta Windows 6.5 ROM I have found that all of them suffer the same bug. Yes, the elusive SMS / E-Mail To field issue.
I have had a look through each ROM thread and it's blurring into one, yet no one has specified a valid fix for this issue.
The issue in question is as follows:
Creating a new SMS / E-Mail. Enter the first few digits / characters of a name / number into the To field. Telephone numbers freeze after the second digit, Name freezes if you delete a character, selecting from the black auto complete box causes the message to send with a (#) as the To address.
A partial fix and lead is the virtual keyboard. Using the full qwerty with keyboard slid in causes the issue. Using keyboard (windows) then you have no issue. With the keyboard open the issue happens no matter what virtual keyboard is selected.
HAS ANY ONE GOT FIXES THAT WORK YET?
Yes I noticed the same problems. I fixed it by not cooking in XT9 for either the Fuze or the TouchPro. In other words, I completely removed any vestige of the HTC keyboard from the ROM, and how everything works perfectly. This means that I have to use my keyboard more, but I've found that its usually quicker to do this anyway. But yeah, I haven't had a freeze in 2 weeks with this method.
I have used several WM 6.5 ROMS and have never had the issue. I use touchpal as my SIP mainly and I always use the autofind in the TO: field. Can you give me the step by step instructions on how to reproduce the problem cause I am just not seeing it?
-McMex
It is a dirrect result of new code thats been put in by microsoft. There about 15 registry entries. I dont have time to post them at the moment. They are posted somewhere in my 6.1 rom thread. These keys are also in all 6.1 roms over 21040
Code:
[HKEY_CLASSES_ROOT\CLSID\{364D1505-915A-4b1d-85A6-8C258B2D2246}]
@="ContactEmailSuggestionGenerator"
[HKEY_CLASSES_ROOT\CLSID\{364D1505-915A-4b1d-85A6-8C258B2D2246}\InprocServer32]
@="msnewmnu.dll"
[HKEY_CLASSES_ROOT\CLSID\{45EEED9B-898C-4caf-BC3E-A5422F56085B}]
@="ContactPhoneSuggestionGenerator"
[HKEY_CLASSES_ROOT\CLSID\{45EEED9B-898C-4caf-BC3E-A5422F56085B}\InprocServer32]
@="msnewmnu.dll"
[HKEY_CLASSES_ROOT\CLSID\{99ae0ef2-0772-4bd4-8f49-d0672b3f6480}]
@="RecipientInfoSuggestionGenerator"
[HKEY_CLASSES_ROOT\CLSID\{99ae0ef2-0772-4bd4-8f49-d0672b3f6480}\InprocServer32]
@="msnewmnu.dll"
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocomplete\SuggestionGenerators]
"email"="{99ae0ef2-0772-4bd4-8f49-d0672b3f6480}"
"phone"="{45EEED9B-898C-4caf-BC3E-A5422F56085B}"
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocomplete]
"MaxSuggestions"=dword:0
[HKEY_CLASSES_ROOT\CLSID\{99ae0ef2-0772-4bd4-8f49-d0672b3f6480}]
@="RecipientInfoSuggestionGenerator"
[HKEY_CLASSES_ROOT\CLSID\{99ae0ef2-0772-4bd4-8f49-d0672b3f6480}\InprocServer32]
@="msnewmnu.dll"
[HKEY_LOCAL_MACHINE\System\Inbox\RecipientAutocomplete]
"DisableIMEContextInAddressFields"=dword:00000001
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocomplete]
"MaxSuggestions"=dword:0
is what fixed it for me.
It seems Microsoft's autocomplete interferes with the HTC/XT9 one, and this kills the Microsoft one.
Trancecoder said:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocomplete]
"MaxSuggestions"=dword:0
is what fixed it for me.
It seems Microsoft's autocomplete interferes with the HTC/XT9 one, and this kills the Microsoft one.
Click to expand...
Click to collapse
WOW, seriously thanx!!! this helped big time so far from what i can see!!!
That seemed to fix it for me as well..!! I'm currently running jug6ernaut's Mystic Fuzeberry 6.5 ROM and was suffering from this very issue and it now appears to be fixed..!! Thanks for the tip..!!
widow mobile lol
pls add this to the wikki
mcmexican:
To recreate try this:
1) Open SMS
2) Type 07
3) 07______________ appears and you cannot continue
OR
1) Open SMS
2) Type name
3) Hit backspace
4) SMS freezes
OR
1) Open SMS
2) Type name
3) Select from black HTC autocomplete
4) Send
5) Send shows from (#) not name and fails
Also! Cooks, the RGU file the contains the reg is:
208f8be6-1362-45b3-ae17-95d4ab426c11.rgu
Do a search within this string for maxsuggestions
Trancecoder said:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocomplete]
"MaxSuggestions"=dword:0
is what fixed it for me.
It seems Microsoft's autocomplete interferes with the HTC/XT9 one, and this kills the Microsoft one.
Click to expand...
Click to collapse
It works for me too...
Thanx
Jules_gt
MS Inbox AutoComplete Kill - reg & cab
Thanks Trancecoder, this fix worked for me as well.