Hi i have just tried to upgrade my xda11 to the newest version,but it has crashed half way through.Can some one offer any help.
It shows usb v 1.03.
were you updating to wm2003 se? if yes; this happened to me and i thought i killed my xda2. the screen showed the same; usb v103. what i did was simply made a soft reset; cradled it again and restarted the upgrade. worked for me and it's been more than a week now and no problems with the upgrade.
hope that helps.
cheers
have same problem with 1.03. works well with 1.02 when upgrading to wm 2003 se
have same problem with 1.03, it appeared model id error. works well with 1.02 when upgrading to wm 2003 se
Related
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
:lol: not buy serial cable!!!
there is an OFFICIAL UPGRADE ready and existing, but not yet PUBLIC,
it is one nice 40 MB RUU file which will uprgade your unit to english language:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
Indirizzo http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
IT'S FANTASTIC AND EASY WHIT THE USB CRADDLE
What you may try to do, for a start, is to reinstall the ROM upgrade once again, USING THE USB CRADLE and nothing else. Better remove the SIM card before installing the upgrade. Also, make sure that the battery is fully charged. All through the upgrade process, do not touch the device.
Finally....
Next day When i was in my job put my imate in the cradle, ran the upgrade and it worked.....I am happpppppy ¡¡¡¡
Upgrade failed
I had the same problem as dherrero. However, I have no luck as him. My XDA II still dead can not be boot. Anyone can help? Thanks.
IT's DEAD
I have a MDA from T-Mobile for 3 weeks now. I find out about the rom update (RUU16006WWE_T-mobile_NL.exe), tried it and got the message that the update failed.
On my MDA screen therse is only the message "USB v1.01".
Running the update again doesn't help.
Is there a solution or do I have to contact T-Mobile?
Hi all ,
One of my Friends had the same problem , he tried another computer and it works , then guess what was the problem ???? We found that it was ZONE ALARM !!!
So please check You'r computers guyes ,it might be another software makes the upgrade failed .
Thanks
Hi all!
We have to be aware, that the upgrade program says "NO PROGRAMS RUNNING ON THE PPC AND NO PROGRAMS RUNNING ON THE PC ITSELF"
It's a hard lesson i learned years ago while flashing a BIOS..... if possible, do it at an UPS equipped PC (or notebook btw) to reduce your chances of killing your device.
Windows XP has many more programs running than one would suspect. As a first measure, kill all the ones you can in the right side of your taskbar, shut down your Anti Virus and Firewall, and cross your fingers while upgrading.....
Should we also shut down Activesync? Or is it needed for the upgrade?
Thanx.
I am in the same boat this day. Please help !!! I tried to upgrade the imate threw the club imate ... i downloaded ok i believe ... i did not use the cradel just a mini sync usb cord ... i used this before many times to sync... but when i tried to run the official update it stopped and now it says only serial v1.02 when i put it in the cradel it says usb v1.o2 its dead... no light for batter scharge nothing???? no sync at all please help
ActiveSync is not involved in the upgrade process. The upgrade program runs out of this, with it's own connection and settings via USB.
I haven't used the mini cord, so I'm of no help about it.
Try the upgrade program again, looks like it failed to fully flash your ROM. (That's why you don't see the charging light, it's Software controlled)
Good Luck!
mm
Try to update your imate using a cradle connected to a pc(usb). It should work
i have the exact same problem as highlighted by the others here, USB and v1.02 screen. Question is, how do you continue to flash your rom after it fails and you put back your unit into the cradle and activesync does not sync it anymore
the upgrade doesnt use activesync so it doesnt matter. Just put the imate in the cradle(in other pc, if possible) and run the upgrade
qtek rom update problem
hi guys. my qtek only says USB v 1.02. I cannot do any rom flash. what rom should i use. where can i download it from?
Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks
I have an Qtek 2020 (bought in Greece).
I had the 1.66 ROM installed and tried to upgrade to the 1.72WWE version dowloaded by the xda-developers ftp site.
In the installation, at the time when the program erases the previous ROM I get the following error message :
ERROR 112 : CE ROM UPGRADE ERROR
To continue the upgrade please :
1. disconnect the Pocket PC from the USB cradle
2. perform a normal reset
3. reconect the Pocket PC and restart the upgrade
tried the above procedure with the same results.
Anyone having any hints?
I had the same, trying to upgrade. Just do as the screen says (i.e.: restart the upgrade). Worked fine for me!! :lol:
done it at least four times with the same result.
The strange thing is that i performed an upgrade already to 1.66 withoutany problems a short while ago. The only difference was that I got the upgrade from my provider intead of xda-developers
I just upgraded my XdaII from O2 to WM5 with this rom:
XDA_WM2k5_2.01a00WWE
everything seem working fine in the upgrade process but when in the end I need reset the xdaII its blocked on O2 boot screen...
I don't know what to do.. I tryed to reinstall it moer times but its always the same way...
some help?
thank u
Have u tryed to reinstall the official one from o2?
hai all, i had upgrade my wm5.0 to Black 3.0 successfully, downgraded back to wm5.0 and intend to upgrade to dutty wm6.0.
when i intended to upgrade again, the upgrade tool prompt me "unknown device, please check you cradle or usb connection". i had checked i can syn with my active syn 4.5. i can move files from my notebook to my htc hermes and vice verse.
i tried numerous time to upgrade from wm 5.0 to many various wm6.0 but still being prompt with the same message.
any advice and guidance would be very much appreciated. Thanks
ohh yeah one more error message i got, "unknown version, you should pick sspl"
problem solved
weird, after i had installed and run the SIM & CID unlocker, i can upgrade to wm6.0.
previously before this issue appear, i still can upgrade to wm6.0(black version) from stock condition.
anyway case close. This place rock