Hi ,
I had 1.72.00wwe on my phone but i was tryin 2 upgrade it further but it got stuck while upgrading and its showing seril while not on cradle and while on cradle its showing usb 1.06
plz hlp me iam newbee and not good in programmin .I also have asecond Xda2 with 1.66.00wwe plz tell if it can b of any help
Reset your device, place it in the cradle and re-run the upgrade.
thanx i tried it already from 2 computers in one its showing error 103 no rom image found and in another its showing error 101 country code problem
Which ROM are you attempting to upgrade to? Which one exactly had you previously upgrade to? What operator do you use?
I'm asking all this to try and get a better picture. Normally, people in your situation can recover by applying the same upgrade again, or, at worst, re-applying the one they are upgrading from.
Make sure you are in bootloader mode (by pressing Jog button and Power button at the same time as pressing reset) before retrying any upgrade. Also make sure the USB cradle is plugged directly into a USB port on your PC and not through a hub and that the power supply is connected to the cradle. It may help to make sure that Activesync isn't running also.
active sync
in the active sync tray it shows that not connected
Well i had 1.72.00wwe rom image 1.14 earlier and iwas tryiong to upgrade to 1.72. something can't remember exactly but it was with rom image 1.17 it was downloaded from t mobile and my current phone is from o2
Click to expand...
Click to collapse
Activesync is not needed for upgrades. The upgrade process looks after its own connection. I suggest you follow the procedures in my post here to overcome the Country ID error problem. You will need to know what the device's operator and language IDs are currently set to, which is why I asked you above. I suspect you won't have Devicedata.txt, so it becomes necessary to know what operator and language the previous upgrade was.
to revive your XDA2 again
The main point is what is ROM 1.66 come from (e.g. i-mate ot T-mobile)
If you doesn't upgrade 1.66 ROM by yourself or it came from factory ,you must tell us which operator did you buy from.
If you try upgrade across operator ,it will hang on boot loader screen.
And again, which 1.72 ROM did you try to upgrade from?
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
Hey guys, ive been reading many threads regarding issues with the sx56, but after going through most of them, it seems ive been left with more questions. Anyway, my problem is , first of all the reception sucks, signals drop every now and then and i hate saying "sorry? ur breaking up" now from what ive learnt so far from most of the posts is that this "signal" issue is due to the radio stack. My siemens sx56 is running:
Windows Mobile Pocket PC 2003
Model No.: PW10B1
ROM version : A.30.09.ENG
ROM date : 01/01/04
Radio Version : A.33.02
Protocol Version : 1.3.3
now, i have been thinking that maybe i should try downgrading the radio stack while still using ppc2003 , but ive seen many posts in which people have bricked their phones due to downgrade.
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Thanks.
snakey said:
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Click to expand...
Click to collapse
The A20.10 and the 6.xx Version should work on your phone, cause it's a PW10B-Model....
Flashing of Radio Stack is everytime little bit danderous like all flashing.
If the process doing fine, there should be no problem. I would do removing the sim and doing a hardreset before flashing the radiostack....
snakey said:
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
Click to expand...
Click to collapse
This is an issue of the A30.0x ROMs. If you're going to use the 4.01.12 then there won't be the increasing sound problem.....
snakey said:
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Click to expand...
Click to collapse
There is no WM 5.0 available for the Wallaby devices. Newest, but in my eyes really buggy ROM Version is WM2003 Second Edition....
Only othe rOS running on the Wallaby is Linux, but until now it's not running as complete, as you can use your phone and all the other functions....
Stefan
thank u for the reply stefan! just a few more quick questions:
1. How do i soft/hard reset? iam sorry iam new to pocket pc's.
2. The ROM u mentioned ,4.01.12, does it have any bugs i should be aware of?
3.Which radio stack do you think is better? the 6.xx or A20.10?
4.How do i install the radio stack and the rom? i downloaded the radio stack ZIP file and the rom is being downloaded. The radio stack zip file has no WIN32 executable file. Do i need to copy it over the phone ? how?
5. Should i install the rom first or the radio stack?
Thanks.
1. Softreset is pushing your stylus once in the little hole on the left side at the bottom.
For Hardreset you have to unscrew your stylus and push twice in the very little hole on the right side at the bottom.
2. The 4.01.12 has like all other WM2003 for the Wallaby the problem that under certain circumstands the sd-card will be formatted. I have used WM2003 for about 2 weeks and had this problem once.
3. Don't know which one is better. Never used one of them cause i have a PW10A-Model
4. You have to put the files in one folder on your SX56 and run the exe directly on the device. Pay Attention to have enough power....
5. It depends on you.....
Stefan
ok this is weird... i upgraded my rom to 4.01.12, after the O2 Screen, normal setup procedure comes.. the thing which bothered me was when i clicked on DEVICE INFORMATION..it is now showing model PW10A-MODEL whereas its a PW10B model,says so on the sticker, and the radio stack is still A.33.02 :S
its working though signal problems are still there... i tried the A20.10 and 6.xxx radio stack versions but they dont wanna upgrade , they give messages like "upgrade failed or retry". Should i try other RSU versions like 4.21??
or maybe i need to try that sd-bootloader method? if so, how?
ok you can ignore my previous post about radio stack, i guess i found the solution.
Radio stack upgrade only works if you copy the 4 files of any radio stack archive to the WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
copying to a seprate folder or anywhere else results in 1% hangup or upgrade failed messages. IT ONLY WORKS WHEN YOU COPY THE FILES TO THE WINDOWS ROOT FOLDER OF THE DEVICE . I just upgraded the radio stack to 6.24.00, lets see if it solves my the problem of bad and breaking up signals.
I still havent found out why my wallaby shows PW10A though :roll:
snakey said:
WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
Click to expand...
Click to collapse
Could you specify Windows root folder?
is it \Windows\ or just \ ??????
snakey said:
I still havent found out why my wallaby shows PW10A though :roll:
Click to expand...
Click to collapse
This depends on the ROM used. PW10A is static in the ROM. If you want it, I'm sure I can make a ROM where it's Type is PW10F .....
Stefan
its the \WINDOWS folder.
And the ROM i used was 4.01.12.
By the way, that 6.24.00 RSU kicks butt! havent came across any signal problems at all. Thanks a lot stefan! this forum rules! :lol:
and do let me know about this model version problem, do i need to install any other ROM which will display the correct model version i.e PW10B ??
Got fustrated
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Re: Got fustrated
WhiteWizard said:
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Click to expand...
Click to collapse
please let me know if you find the solution...I have the same problem
Thanks
Yes
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Re: Yes
WhiteWizard said:
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Click to expand...
Click to collapse
can you tell me whcih version of RSU you used?
I have PW10B1 model and I load the XDA-Developers ROM Version 1.1 but I still have problems with RSU..I tried almost all RSU from ftp://ftp.xda-developers.com/Wallaby/ but no succees...
if you have the same model maybe you can send me by email your RSU version...please!
my email is [email protected]oo.com
I have 6.25.02
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Re: I have 6.25.02
WhiteWizard said:
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Click to expand...
Click to collapse
I just did this but when I'm starting at 1% the status bar is disappearing and it seems that is doing nothing...is this normal?
Did you had the status bar until 100%?
Perhaps you have a wrong ROM for that RSU
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Sorry
Yes, I saw my status bar reach 10%, 20% and so on, ultil it reach 100%
Re: Perhaps you have a wrong ROM for that RSU
WhiteWizard said:
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Click to expand...
Click to collapse
here is written tu use for their ROM, XDA-Developers ROM Version 1.1, and PW10B-Model RSU Version 6.24.20 ....but is not working with this also (...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Hi!
long time viewer first time poster.
I have G4 CID LOCKED Cingular 8125 with mfrazzz's Crossbow Reloaded 1.7.1 I have wizard love Rom as Base.
I really tried hard to update (I guess it is really a downgrade) my original Radio from 02.25.11 to 2.19.11 but no matter what I do, it failed.
I tried with every romupdateutility_wizard_noid.exe i could find but I get the same result everytime.
ON PC: I get 260 Error (tried in two machines same error message)
and
On my Wizard: stuck in this 3 colored screen. I see 3 color screen with "RUU" in right upper corner and "USB" on left bottom with IPL/SPL version showing in red If i press reset button, it will boot back to mobile windows fine.
Can anybody help me?
My rest device info:
ROM Version: 2.18.0.0 WWE
ROM date:2/14/06
IPL/SPL: 2.25.0001
GSM:02.25.11
Protocol version? 4.1.13.12
ExtROM version: faria V5.0
My Downgrade
All I did was use the rom upgrade utility from the "wizard love rom" (the one that is in Italian) and the T-mobile radio rom listed in the Wiki.
Worked like a charm!
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
nic2mit said:
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
Click to expand...
Click to collapse
Is your device actually booting up? If so, just download one of the radio ONLY roms. It won't matter whether you have a CID locked phone or not and the radio ONLY rom will not touch the IPL/SPL.
Having said that, is there a reason why you want to downgrade to 2.19? Are you having missed calls issues?
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Probably you read this already
xdawiz said:
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Click to expand...
Click to collapse
A little bit off regarding your initial post but here´s good feedback on how both radios behave.
http://forum.xda-developers.com/showthread.php?t=312834
I've had some problems as well.
I used the tool that came in the download to downgrade to 2.19 (I am having missed calls problem) and it won't.
I'm using a Windows Vista and already did the whole thing to update drivers with the one given on the forum over here, yet, everytime I run the thing it crashes and then I have to go through it all over again.
Its like the driver just doesn't work anymore, even though I have tried "re-updating" it to the one that I downloaded here, unlike the real Roms this one just won't go throguh and wait for the 3 colored screen to come up, just freezes before.