Related
I've tried several of the SE roms floating aroung the forums with my I-mate and finally setteled with the translated 2.20.07CHS one.
This rom obviously has Hands-free profile implemented to some degree, I bond my Bluetrek-G2 with the phone, and a long keypress on the G2 properly invokes the "Last call redial" feature of Hands-free.
My question is: to what extent is the hands-free profile implemented? Specifically I'm interested to know whether the "Caller ID" feature is implemented, so that headsets with built-in LCD displays for caller ID (e.g. Sony-Ericsson HBH-660 and the upcoming Jabra BT800) can be put to full use.
Any experience regarding this issue?
I saw some review/post from people with caller ID bt Headset
saying that is working fine , with the caller ID with the 2.20 CHS ROM
Were those posts on any of the XDA-DEVELOPRS forums?
NO, I saw them @ some chinese forum
which few model of caller ID Bt , working fine
"peoples say"
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
skuld said:
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
Click to expand...
Click to collapse
You may have a look at this thread to see how to turn on the Handsfree on ROM 2.06
http://forum.xda-developers.com/viewtopic.php?t=14386
Tried that as well ... got even worse results, sometimes the headset works and sometimes it doesn't ... have embarassed myself in front of people by wearing the headset on my left ear and still putting the phone to my right ear ...
skuld, I suggest you try 2.20.07CHS, it is the most stable 2003SE out there, and Bluetooth works great for me using the Handsfree profile (sound only comes out of the headset and the headsets' mic is operational).
I intend to purchase the Jabra BT-800 as soon as it is released and hope toi take advantage of full Handsfree functionality with it finally.
If you do decide to upgrade to 2.20.07CHS, please let me know if caller id works for you with your HBH-660.
so?
So, basicallly, the non-chinese speakers, are stuck with non fully working BT profiles, since handsfree option identifies every headset as hansdfree, and then the problem with the "stereo" effect appears.
In my case, both (device and XDA) mics and both speakers work simultaneously either in SE HBH 35 headset or BT Carkit.
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
2.20 indeed solves this problem, I'm currently running 2.20 for several days with no problems, the translation to English provided by Buzz is impressive and comprehansive. I don't speak a work of Chinese yet have no problems using my device, I have yet to come up with a Chinese message-box/notification of any kind. Bluetooth works flawlessly with my Bluetrek G2 using Hands-free profile.
Ummm..
Will give it a chance.
Keep me informed should you find any other problem using this version.
:wink:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Anyone can provide me the complete REG file of 2.20CHS?
darren_the said:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Click to expand...
Click to collapse
I converted the reg file from default.fdf of the ROM, but it seems to be incomplete when I compare it against 2.02 and 2.06.
I understand that Kinglee uploaded the PHM reg backup file. Can someone give me a hint how I might convert that file to a text readable format?
Re: so?
Looking Glass said:
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
Click to expand...
Click to collapse
I can confirm that 2.20 uses different bluetooth DLLs than 2.02 or 2.06.
After configuring BT headset, the user is prompted with BTBond_UI.exe screen with checkbox for headset/handsfree enabled, and greyed out checkbox for ActiveSync, Dial-up Networking and Serial.
There is quite a number of differents in the registry settings as well.
I think I just about manage to port 2.20 BT over to 2.06 (or 2.02 for that matter).
However, I need you guys to give me pointers on a couple of things:
(a) for handsfree profile - can 2.20CHS users enable the handsfree profile and use only the headset microphone to speak to the recipient?
(b) what about current 2.02 users?
(c) What can 2.20 CHS users do with their current BT settings? Please describe what you are allowed to do.
- No merry christmas present...hopefully, there's one for happy new year, aye? :wink: -
can someone post the file BTBond_UI.exe i need to try it on 2.02t version
BTHFP
Ok here's the skinny.
On 2.06 got BT HandsFree profile to pickup and end calls via headset with stereo audio but headset mic still off (Xda II mic on).
Anyone got the headset mic to work?
Need 2.20 registry to understand how BTBond_UI.exe and other *.dll works.
I posted blue tooth mic not responding to voice input topic a couple of days ago, from responses I got ... I decided to upgrade from 2.02 to 2.20 CHS, (it's a good upgrade it's got WMP 10 but no letter recogniser or transcriber input ??).... but alas G2 BT would still not respond to voice.
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
I would like to upgrade back to WM2003SE, but I have no idea what combination of ROM software will deliver the latest features of the upgrade plus the full functionality for the bluetooth device ??
So anybody out there know what combination works ??
BTHFP
MJW said:
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
Click to expand...
Click to collapse
Are you saying under 1.72 your G2 is able to enable HandsFree profile perfectly? What BT driver did you use Bro?
Steady...... I am just a beginner at this !!!
What I am saying is that with the 1.72.00 WWE ROM the G2 now works i.e I can hear through it and when I speak into it I can be heard. Pressing the button on the headset picks the call up and ends the call. What it doesn't do with this level of software is last number redial.
As for the BT software I have no idea what I am running ? Is there a way of finding out ? The 1.72 update was from the 02 site.
I have downloaded the 3500 BT patch and was wondering about upgrading back to 2.20.07 CHS + the patch and see if that works. Thoughts ? But I need the letter/Transcriber input and I am not sure where you get those and how to add them to the XDA2.
BTHFP
I am running both the WM2003SE MSBT and BC/WC 3500 BT on my Xda II.
Probably you are referring to the HeadSet profile Bro. We're discussing about the HandsFree profile - correct me if I am wrong.
Hi,
Can anyone point me to some working Bluetooth Stacks for the XDAII that will run on the WM2003SE upgrade please.
My matey has upgraded his XDAII using Sin's merged WM2003SE upgrade (worked great for a Vodafone network!) and installed the MS BT Stack however this only gives partial results when using BT.
He is able to use the headset etc without any problems however when he tries to use the XDAII in his BMW (2005 model 320ci, built-in BT) he is getting intermittant results i.e WM2003SE connects with the car and the headest without a problem however there is a delay before the car picks up the phone when its ringing and on most occasions simply drops the call.
I wanted to know what other stacks are out there that may be worth trying, I have downloaded Toshiba's BT stack and the Widcom stack but I don't know of any others...
Advise much appreciated..
Godz
i too would love to know this.
BuMp
Me too! The widcom stack has a useless headset driver as far as I can read..
I installed http://pdaphonehome.com/forums/showthread.php?s=&threadid=43210 but I am getting out of memory error.. It may be from a XDAIIi??? It also diod a hard reset...
FWIW, to those that have the BMW bluetooth, You will find the first time you make or recieve a call, you have to do it twice. IE dial the number, it will not connect, then redial and it works.
Same when you get a call, answer, it wont connect, then answer a second time and it will connect.
After the first call, it will then work as you would expect.
If you dial directly from the phone it will tranfer to the car kit, but not until the other party actually answers, you wont hear the ringing of the phone.
The big frustration is that although you get sound from the car speakers, I think its only the microphone in the phone that is working. So the other party may have trouble hearing you if your phones in a brief case or your pocket.
Hope that helps
Jon
2003 M3 with BMWBT
Can anyone tell me if the translated chinese rom has these faults?
I am going mad -
before upgrading to WM2003 SE - my bluetrek G2 worked fantastically.
NOW
it sets it up as handsfree device - I hear people through the headset but people only hear me through the mike on the XDA - the bluetrek microphone seems to be "disabled" in handsfree mode.
ANY ideas how to enable the microphone on the bluetek headset so it is in HEADSET mode and not through the microphone input on the XDA ?
I have been looking for an aswer to same problem. Hopefully we can find something together. :idea:
Problem solved
When I upgraded to 2003 SE I had three main problems and spent hours trying to solve them:
1) Bluetooth handsfree automatically kicked in - when I needed headset mode - rendered my bluetrek headset useless.
2) e-mail attachments - enormous problems downloading and sending attachments
3) alarm clock - not ringing
I have solved all 3 problems by reinstalling the 2003 se rom using the rom of 2.06 instead of the "merged" rom which was causing me the above three problems - when upgrading be careful and beware of country code errors - I am no expert but I used the rom upgrade of Hery and reupgraded and am happy with the result. Every time upgrading is a dangerous excersise and if you like me just want a machine that works and not really technically minded - beware of upgrading. I was able to but was nervous the whole way through. They say version 2.06 hangs but its been OK for me. I do not have wizcom on my machine but the only bluetooth I use is the headset and for GPS which work with the microsoft bluetooth protocol.
Good luck
Anybody using the SE HBH-DS970 bluetooth headset with the Hermes and if so what is your experience?
Thanks
i use that one waht is your wonder?
I wanted to know if everything works fine and if you are happy with the experience (sound quality, responsiveness, etc.).
I tried it briefly at a store and everything seemed to work except when I received a call I could not hear the person talking. It may just be that I needed to do a soft reset but if I know it is working with the Tytn for someone else I will buy it.
Thanks!
No Good.
1. Sound Quality is very poor even with the A2DP hack. Far from my M600i. It's much better with the original usb headset. so I guess maybe Sony Ericsson has a different A2DP encoding implement or have some tricks on the media player?
2. Only the Call Key and Volume keys work. I don't know if there any PPC music player support DS970's music keys.
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. Only one problem I couldn't solve so far.. it is skipping every 40-50 sec. I am using now original rom from o2 germany. I am going to try imate rom or at least new radio rom. Let see, if it helps
2. All keys are working with native Windows Media Player.
I am using it with PocketPlayer. Works fine with every button. Sound quality is super after the hack. But I got the same problem as SWayf, music got skippy every while...
Multipoint Function with PC Headset profile?
Has anyone tried to pair this headset with a Hermes and simultaneously with a PC that supports the bluetooth headset profile so that it is possible to switch from VoIP (eg Skype) and the mobile phone easily?
Following on my previous post, I now have the headset in hand and although I can connect to my PC and phone simultaneously using the multipoint functionality, the PC connection is only for music playback, ie the microphone is disabled, so I cannot use the headset for VoIP calls. The Bluetooth Service Class is listed as "Audio Sink" rather than "Headset". I don't suppose anyone knows of a way to activate the microphone in this mode?
SWayf said:
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. QUOTE]
wud u please tell that what exactly u did, caz i m new at ppc's
thx
Click to expand...
Click to collapse
Really regret buying it.. Tried the A2DP tweak with the Hermes Tweaker but no luck. Better soundquality but sound keeps skipping every 30-40 seconds, useless for listening to music... I would got nuts having to listen to those skips that often..
Anyone found any tweak to get rid of the skipping problem?
Buttons works fine for controlling Tytn audio quality is ok and I love the looks of it, if I just could get rid of that skipping..
How sick is this! I found this tip on another forum.
Try installing this taskmanager, start wmp and then the task manager, close any apps you don't need to use and then set it to monitor system load.
http://www.iaccarino.de/silvio/ppcstuff.htm
As long as it's running NO SKIPPING so far, have been listening to three full songs so far....
Which of you gurus can figure this one out??? So it must be possible to fix the problem by emulating what this software does??
Any updates on this?
Considering buying one, but wont if there's no fix to the skipping
I've just bought one of these headsets. God, the sound is atrocious. Can someone please fill me in on the hack that was mentioned earlier? I've got the Fit4cat ap on my Hermes but the sound is still rubbish even after adjusting the the "improve BT A2DP sound quality" setting to "excellent". Is this the hack that was referred to earlier or is there another I am not aware of??? Please, can anyone help with this. I feel I have wasted a serious amount of cash on this
http://forum.xda-developers.com/showthread.php?t=284974
This is what you need to read/download.
Hi!
Got hermes and ds970 to work (almost) perfectly
I did this, step by step:
-Hard reset hermes (got o2 xda trion with latest htc wwe rom 1.35 radio 1.18)
-installed ms voice command 1.6
-installed beta version from jetware and their hermes fix
(all files can be found here http://www.jetwaremobile.com/beta.htm don't forget to soft-reset after installation of the "code signing certificate")
-installed a2dpfix
-get HTweakC and set a2dp quality to "medium" do not set it any higher, as the sound quality will be better on medium than on e.g. "excellent"
Configure Jetware Software to show CallerID etc...
Working:
-CallerID shows name!! AND number (alternating) everytime
-A2dp quality is quite good (could be better, but definately very usable)
-Voice command quite usable (still rarely switches back to device speaker)
-very stable bluetooth connection
-remote control of windows media player
not working:
-display doesnt show song title, but i guess we'll never get that on a wm5 device...hope i'm wrong.
Wanna thank everyone on the hermes gps thread...keep up the good work!!
so you can stream media player to the headset too as well as controlling VC1.6? Does VC1.6 fire up when pressing headset button?
Hi!
When I'm listening to music, and press the headset button:
-Mediaplayer goes on pause
-after 2-3 seconds I hear the voice command ding-sound and can say my command. Then hear the lady from microsoft ;-) respond (on long responses the sound sometimes switches back to the device speaker such as when the lady asks me what number-entry to dial and there are 5 numbers in the contact.)
-then switches back to playing mediaplayer for about 2 seconds until the phone initiates the call and then pauses mediaplayer again and switches the headset to the call.
-after the call sound again goes to a2dp and the song resumes playing.
Hope it stays that way...I'll be very very carefull what programs I install.
programs I got installed at this point are:
spb diary
prssreader
navigon mobile navigator 5
google maps (the new not java one)
wakeitup
pocketstreets 2005
tcpmp
clearvue pdf
spb gprs monitor
totalcommander
+the ones mentioned in my post above
(all programs, if not mentioned otherwise, are the latest versions)
oh BTW I tried setting a2dp quality to "low". I can't hear the difference to "medium" and think it will be less stress on the cpu.
what does not work, is also that the announciation of new messages from voice command 1.6 when set to "announce only over bluetooth" still come out of the device speaker.
Hope it works for you, too.
excellent. i'll try these settings. thanks for detailed message
got myself a ds970 and followed your instructions Brevi. music streams brilliantly but i can't transfer calls to the headset,make calls from the headset nor can i get VC1.6 to fire up when i press the headset button. if i start VC1.6 on phone, then i can say command on the headset and that works.
Do you install the JetDial app?
What settings did you configure in the Jetware settings?
any ideas?
i have the "new" btagext.dll which fixed VC1.5 and mono headset - do you think that's the issue?
Update: Aha, i uninstalled the JetDial app (stupid or what) and now everything works except starting VC1.6 using the headset button. i suspect, JetDial has left some reg keys that need removing. No idea what though
Hi! Yeah, you probably need to do a hard-reset to get a clean install of all the little "helpers". I'm confident it will work then.
Tell me if you get the "play reminders only over bluetooth handsfree" option in vc1.6 to work maybe with the btagext.dll. I'm away from my main computer for a couple of days and unfortunately can't mess with my phone till I get back.
Guys,
Once again I am turning to you with a problem which is driving me nuts… After several attempts (ROMs and registry settings), I simply cannot get it working. I am using Jabra BT8010 handset and I get complaints from some, but not all, people I talk to over the phone that my voice is skipping. Some fragment of the words (a letter or two) is simply missing - not heard – by my talking partner. This has also happend to me when using official or irus ROM!!
First let me say that after I installed Michy’s R4.1 ROM the things with BT has changed a bit – in positive direction. I noticed that because the Jabra connects to the phone faster then before, when phone is rebooting the BT connection sign is gone immediately, etc. This was not the case with the original ROM nor iruses ROM 0mb PP. At this point I’d would like to thank Michy for that, since the file transfer to and from Athena now works almost flawlessly as well.
Please note that I get no skipping sound in downlink direction: nor during phone call nor during streaming of music or videos - the sound quality is just great!
But the voice skipping is just frustrating. What to do? I have tried twitching several settings in registry: BitPool, MaxBitPool, Sample rate and Use Joint Stereo. But, no combination resulted in no-skipping sound. Is it Jabra? Could you suggest what to do next in order to get this working!!!
PLEASE HELP!
Uros
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
eaglesteve,
Meanwhile I got my hands on Motorola HS810. Guess what: no voice skipping or distortion what so ever!! So is there something wrong with my Jabra or simply the BT or its settings are not matching to Jabra? Someone suggested to delete the Bitpool and MaxBitPool from the registry to get protocol handshake, i.e. the device negotiate for optional parameters…?
I will try R5.1 and report back.
One question though in regards to BT and file transfer since you mentioned it: the feature to make my device visible to other keeps disabling automatically. Once I set it (check) and file transfer (via moBLUe) works, but sometimes - I swear I didn't touch the settings - the file transfer (via moBLUe) does not work. When I check the feature the feature is disabled!?!?! WTF...? I am doing something wrong or...
BR
Uros
I had the same problem with my 8010 until I went to radio 1.57 (and then 1.58, although 58 isnt as good as 57 for sound quality and the 8010). Im not using Michy but that shouldnt matter.
eaglesteve said:
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
Click to expand...
Click to collapse
Eaglesteve, what solution do you have for VOiP?
weird. i am on michy 4.1 spl 1.2 and radio 1.57, and i think i have the same problem, but only with skype voice calls.
i am using plantronics pulsar 260.
it is so bad that the word "hello" breaks into 3 or 4 fragments.
beginner said:
Eaglesteve, what solution do you have for VOiP?
Click to expand...
Click to collapse
I use AGEPhone.
http://forum.xda-developers.com/showthread.php?t=402463
Using Jabra BT8040 with Athena and another cell phone,
poor performance, ocassional voice breaking and soft.
Just upgrade its firmware and monitoring.
With another simple bluetooth by Motorola H375,
no such issue, voice was clear and loud both ways.
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
I'm on ROM AP4, you might try that, too.
cerk2006 said:
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
Click to expand...
Click to collapse
I have same expertise as you (jabra with some troubles). But if I connect this headset to a blackberry no problems and it is perfect
I have 7500/4.1(3.5) and a BT8010. I have solid connection with my blue tooth.
From your descriptions, it sounds like you have a defective 8010.
nrm said:
From your descriptions, it sounds like you have a defective 8010.
Click to expand...
Click to collapse
This is my second Jabra 8010. I have experienced the same problem with both!
Yesterday, I have flashed Athena to Michy's R5.1. No change.. the voice skipping is still present ;(
I decided and will replace Jabra. I have two candidates: Nokia BH-902 or Motorola SH-7x0. As said Motorola before Motorola SH810 gives very good – no distortion – voice! Will see how the Nokia behaves. Any pros and cons for each???
Thanks guys for your help.
Uros
Yes, same effect here, I'm using the Jabra 8010 also and have sometimes the same problem. From my point of view it is a jabra problem, not a ameo / athena nor a ROM problem.
After updating on radio 1.58 I have some problems with the connection to my Pioneer carraudio Sytem (used as a handsfree set) also. So I've decided to go back to 1.50, after that I will update on michyprima and check it....
Kind regards
Andreas
Hi all, I'm new to this forum, but I have learned a great deal from you guys & gals! Hail to all!
I have the same problem with my U1000 & bt8010 under Radio 1.57 & 1.5.
For me, the problem seems less noticeable if I:
1. stand / sit STILL (sigh...)
2. have more ram to the system (no big TODAY plug-ins like spbDiary)
In theory the 8010 is perfect for big dogs like the athena. (gosh i love the phonebook and the music ... even mono makes me happy ...)
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
tootallk2000 said:
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
Click to expand...
Click to collapse
tootallk2000,
I have been using the FW 1-40-0 for more then a year now and compared to older FWs it does not make a difference
Uros
In my post #12 I claimed I had "solid connection with my blue tooth". I spoke too soon. The first time I played music on Pocket Music I got lots of skipping.
This was also a problem discussed at length last year. I did a reg search on "priority256" and found that the decimal number was 131.
I changed it to 256 and NOW I have "solid connection with my blue tooth". I have not had a single skip in 15 minutes of playing music.
OOPS - I just got a 1/2 second skip.
on my post at #6, i also spoke too soon. when i tested skype at our office (faster dsl connection), the voice is smooth, no skipping. i guess it was just an internet connection problem.