Related
Having just upgraded to WM2003SE 2.06 (SIN v3.5) ROM, i've found Bluetooth hedset profile to still not work properly with my Sony HBH-600. I can pair my headset without issue, however when i make calls the headset kicks in for about 2 seconds then passes the call back to the phone.
Can anyone suggest anything to try to fix this?
Bluetooth just wouldn't work reliably with the inital Windows Mobile 2003.
When I upgraded to Windows Mobile 2003 SE (based on 2.02t ROM), my bluetooth headset microphone didn't work (only the XDA handset), this was less than ideal. Now with the WM2003SE 2.06 ROM it's worse than ever!
All this just to talk to someone without a wire......technology, gotta love it!
Thanks for any help!
Can anyone help at all? Thanks
Found the fix
I think i found what my issue was, i was selecting yes to "hands free" profile, hence not getting the "headset" profile offer.
Once i selected the correct profile, guess what, it works now without any issues at all.
Stupid user error!
Hi,
Can anyone point me to some working Bluetooth Stacks for the XDAII that will run on the WM2003SE upgrade please.
My matey has upgraded his XDAII using Sin's merged WM2003SE upgrade (worked great for a Vodafone network!) and installed the MS BT Stack however this only gives partial results when using BT.
He is able to use the headset etc without any problems however when he tries to use the XDAII in his BMW (2005 model 320ci, built-in BT) he is getting intermittant results i.e WM2003SE connects with the car and the headest without a problem however there is a delay before the car picks up the phone when its ringing and on most occasions simply drops the call.
I wanted to know what other stacks are out there that may be worth trying, I have downloaded Toshiba's BT stack and the Widcom stack but I don't know of any others...
Advise much appreciated..
Godz
i too would love to know this.
BuMp
Me too! The widcom stack has a useless headset driver as far as I can read..
I installed http://pdaphonehome.com/forums/showthread.php?s=&threadid=43210 but I am getting out of memory error.. It may be from a XDAIIi??? It also diod a hard reset...
FWIW, to those that have the BMW bluetooth, You will find the first time you make or recieve a call, you have to do it twice. IE dial the number, it will not connect, then redial and it works.
Same when you get a call, answer, it wont connect, then answer a second time and it will connect.
After the first call, it will then work as you would expect.
If you dial directly from the phone it will tranfer to the car kit, but not until the other party actually answers, you wont hear the ringing of the phone.
The big frustration is that although you get sound from the car speakers, I think its only the microphone in the phone that is working. So the other party may have trouble hearing you if your phones in a brief case or your pocket.
Hope that helps
Jon
2003 M3 with BMWBT
Can anyone tell me if the translated chinese rom has these faults?
Anybody using the SE HBH-DS970 bluetooth headset with the Hermes and if so what is your experience?
Thanks
i use that one waht is your wonder?
I wanted to know if everything works fine and if you are happy with the experience (sound quality, responsiveness, etc.).
I tried it briefly at a store and everything seemed to work except when I received a call I could not hear the person talking. It may just be that I needed to do a soft reset but if I know it is working with the Tytn for someone else I will buy it.
Thanks!
No Good.
1. Sound Quality is very poor even with the A2DP hack. Far from my M600i. It's much better with the original usb headset. so I guess maybe Sony Ericsson has a different A2DP encoding implement or have some tricks on the media player?
2. Only the Call Key and Volume keys work. I don't know if there any PPC music player support DS970's music keys.
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. Only one problem I couldn't solve so far.. it is skipping every 40-50 sec. I am using now original rom from o2 germany. I am going to try imate rom or at least new radio rom. Let see, if it helps
2. All keys are working with native Windows Media Player.
I am using it with PocketPlayer. Works fine with every button. Sound quality is super after the hack. But I got the same problem as SWayf, music got skippy every while...
Multipoint Function with PC Headset profile?
Has anyone tried to pair this headset with a Hermes and simultaneously with a PC that supports the bluetooth headset profile so that it is possible to switch from VoIP (eg Skype) and the mobile phone easily?
Following on my previous post, I now have the headset in hand and although I can connect to my PC and phone simultaneously using the multipoint functionality, the PC connection is only for music playback, ie the microphone is disabled, so I cannot use the headset for VoIP calls. The Bluetooth Service Class is listed as "Audio Sink" rather than "Headset". I don't suppose anyone knows of a way to activate the microphone in this mode?
SWayf said:
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. QUOTE]
wud u please tell that what exactly u did, caz i m new at ppc's
thx
Click to expand...
Click to collapse
Really regret buying it.. Tried the A2DP tweak with the Hermes Tweaker but no luck. Better soundquality but sound keeps skipping every 30-40 seconds, useless for listening to music... I would got nuts having to listen to those skips that often..
Anyone found any tweak to get rid of the skipping problem?
Buttons works fine for controlling Tytn audio quality is ok and I love the looks of it, if I just could get rid of that skipping..
How sick is this! I found this tip on another forum.
Try installing this taskmanager, start wmp and then the task manager, close any apps you don't need to use and then set it to monitor system load.
http://www.iaccarino.de/silvio/ppcstuff.htm
As long as it's running NO SKIPPING so far, have been listening to three full songs so far....
Which of you gurus can figure this one out??? So it must be possible to fix the problem by emulating what this software does??
Any updates on this?
Considering buying one, but wont if there's no fix to the skipping
I've just bought one of these headsets. God, the sound is atrocious. Can someone please fill me in on the hack that was mentioned earlier? I've got the Fit4cat ap on my Hermes but the sound is still rubbish even after adjusting the the "improve BT A2DP sound quality" setting to "excellent". Is this the hack that was referred to earlier or is there another I am not aware of??? Please, can anyone help with this. I feel I have wasted a serious amount of cash on this
http://forum.xda-developers.com/showthread.php?t=284974
This is what you need to read/download.
Hi!
Got hermes and ds970 to work (almost) perfectly
I did this, step by step:
-Hard reset hermes (got o2 xda trion with latest htc wwe rom 1.35 radio 1.18)
-installed ms voice command 1.6
-installed beta version from jetware and their hermes fix
(all files can be found here http://www.jetwaremobile.com/beta.htm don't forget to soft-reset after installation of the "code signing certificate")
-installed a2dpfix
-get HTweakC and set a2dp quality to "medium" do not set it any higher, as the sound quality will be better on medium than on e.g. "excellent"
Configure Jetware Software to show CallerID etc...
Working:
-CallerID shows name!! AND number (alternating) everytime
-A2dp quality is quite good (could be better, but definately very usable)
-Voice command quite usable (still rarely switches back to device speaker)
-very stable bluetooth connection
-remote control of windows media player
not working:
-display doesnt show song title, but i guess we'll never get that on a wm5 device...hope i'm wrong.
Wanna thank everyone on the hermes gps thread...keep up the good work!!
so you can stream media player to the headset too as well as controlling VC1.6? Does VC1.6 fire up when pressing headset button?
Hi!
When I'm listening to music, and press the headset button:
-Mediaplayer goes on pause
-after 2-3 seconds I hear the voice command ding-sound and can say my command. Then hear the lady from microsoft ;-) respond (on long responses the sound sometimes switches back to the device speaker such as when the lady asks me what number-entry to dial and there are 5 numbers in the contact.)
-then switches back to playing mediaplayer for about 2 seconds until the phone initiates the call and then pauses mediaplayer again and switches the headset to the call.
-after the call sound again goes to a2dp and the song resumes playing.
Hope it stays that way...I'll be very very carefull what programs I install.
programs I got installed at this point are:
spb diary
prssreader
navigon mobile navigator 5
google maps (the new not java one)
wakeitup
pocketstreets 2005
tcpmp
clearvue pdf
spb gprs monitor
totalcommander
+the ones mentioned in my post above
(all programs, if not mentioned otherwise, are the latest versions)
oh BTW I tried setting a2dp quality to "low". I can't hear the difference to "medium" and think it will be less stress on the cpu.
what does not work, is also that the announciation of new messages from voice command 1.6 when set to "announce only over bluetooth" still come out of the device speaker.
Hope it works for you, too.
excellent. i'll try these settings. thanks for detailed message
got myself a ds970 and followed your instructions Brevi. music streams brilliantly but i can't transfer calls to the headset,make calls from the headset nor can i get VC1.6 to fire up when i press the headset button. if i start VC1.6 on phone, then i can say command on the headset and that works.
Do you install the JetDial app?
What settings did you configure in the Jetware settings?
any ideas?
i have the "new" btagext.dll which fixed VC1.5 and mono headset - do you think that's the issue?
Update: Aha, i uninstalled the JetDial app (stupid or what) and now everything works except starting VC1.6 using the headset button. i suspect, JetDial has left some reg keys that need removing. No idea what though
Hi! Yeah, you probably need to do a hard-reset to get a clean install of all the little "helpers". I'm confident it will work then.
Tell me if you get the "play reminders only over bluetooth handsfree" option in vc1.6 to work maybe with the btagext.dll. I'm away from my main computer for a couple of days and unfortunately can't mess with my phone till I get back.
Successfully upgraded my Qtek 8500 (UK) with both the Cingular and QTEK latests ROM
Works great.
Using for 2 days and now my microphone feeds everything back through earpiece and no one hears anything other end.
Same with walk and talk headset.
Works fine when working with bluetooth headset or car kit.
Is this a hardware fault and just coincidence, or have I messed up the registry or Radio etc.
Anyone seen similar.
Many thanks
Try a hard reset. Sounds like something may be corrupt in your audio managment files.
Just tried a hard reset, but no joy I'm afraid.
I have reloaded the ROM twice as well.
Is there a way to rebuild and reload these management files.
It has to be software as the walk and talk headset uses a different electronic channel and separate mic!
Well that's my theory
http://www.jetwaremobile.com/install.htm
Here's a link to Jetware Mobile's website. Since you are obviously using a Bluetooth headset and a handsfree car kit, it may be that the BT extension is getting twisted up. You can download and install a free trial I believe for 30 days. I did not need this for my BT connections with the QTEK 8500 but these things can be very hardware specific. By the way, did you try the phone after hard reset and prior to pairing with any of your BT devices?
Sorry to clarify, it is the handset mike that is not working.
When used with BT, voice is transmitted OK to recipient.
However using handset by itself all you hear is a slightly delayed repeat of your own voice in the handset earpiece and the call recipient hears nothing.
Thanks
Danny
I had a similar thing happen to a Sony Z600 and traced the problem to a resistor that failed. Apparently this controled where to route the audio when a wired headset was plugged in and when it failed everything routed through the headset port vs the speaker. Not sure if this is what's happening to your Qtek, I've got one as well and sometimes it just acts wierd, drops calls, wont hang up, wont recognize key presses but I just attribute it to the MS operating system. By the way, you can pick up Z600's fairly cheap, it's a great 2nd phone & syncs with outlook, I picked up another after my first crapped out with no problems.
Guys,
Once again I am turning to you with a problem which is driving me nuts… After several attempts (ROMs and registry settings), I simply cannot get it working. I am using Jabra BT8010 handset and I get complaints from some, but not all, people I talk to over the phone that my voice is skipping. Some fragment of the words (a letter or two) is simply missing - not heard – by my talking partner. This has also happend to me when using official or irus ROM!!
First let me say that after I installed Michy’s R4.1 ROM the things with BT has changed a bit – in positive direction. I noticed that because the Jabra connects to the phone faster then before, when phone is rebooting the BT connection sign is gone immediately, etc. This was not the case with the original ROM nor iruses ROM 0mb PP. At this point I’d would like to thank Michy for that, since the file transfer to and from Athena now works almost flawlessly as well.
Please note that I get no skipping sound in downlink direction: nor during phone call nor during streaming of music or videos - the sound quality is just great!
But the voice skipping is just frustrating. What to do? I have tried twitching several settings in registry: BitPool, MaxBitPool, Sample rate and Use Joint Stereo. But, no combination resulted in no-skipping sound. Is it Jabra? Could you suggest what to do next in order to get this working!!!
PLEASE HELP!
Uros
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
eaglesteve,
Meanwhile I got my hands on Motorola HS810. Guess what: no voice skipping or distortion what so ever!! So is there something wrong with my Jabra or simply the BT or its settings are not matching to Jabra? Someone suggested to delete the Bitpool and MaxBitPool from the registry to get protocol handshake, i.e. the device negotiate for optional parameters…?
I will try R5.1 and report back.
One question though in regards to BT and file transfer since you mentioned it: the feature to make my device visible to other keeps disabling automatically. Once I set it (check) and file transfer (via moBLUe) works, but sometimes - I swear I didn't touch the settings - the file transfer (via moBLUe) does not work. When I check the feature the feature is disabled!?!?! WTF...? I am doing something wrong or...
BR
Uros
I had the same problem with my 8010 until I went to radio 1.57 (and then 1.58, although 58 isnt as good as 57 for sound quality and the 8010). Im not using Michy but that shouldnt matter.
eaglesteve said:
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
Click to expand...
Click to collapse
Eaglesteve, what solution do you have for VOiP?
weird. i am on michy 4.1 spl 1.2 and radio 1.57, and i think i have the same problem, but only with skype voice calls.
i am using plantronics pulsar 260.
it is so bad that the word "hello" breaks into 3 or 4 fragments.
beginner said:
Eaglesteve, what solution do you have for VOiP?
Click to expand...
Click to collapse
I use AGEPhone.
http://forum.xda-developers.com/showthread.php?t=402463
Using Jabra BT8040 with Athena and another cell phone,
poor performance, ocassional voice breaking and soft.
Just upgrade its firmware and monitoring.
With another simple bluetooth by Motorola H375,
no such issue, voice was clear and loud both ways.
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
I'm on ROM AP4, you might try that, too.
cerk2006 said:
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
Click to expand...
Click to collapse
I have same expertise as you (jabra with some troubles). But if I connect this headset to a blackberry no problems and it is perfect
I have 7500/4.1(3.5) and a BT8010. I have solid connection with my blue tooth.
From your descriptions, it sounds like you have a defective 8010.
nrm said:
From your descriptions, it sounds like you have a defective 8010.
Click to expand...
Click to collapse
This is my second Jabra 8010. I have experienced the same problem with both!
Yesterday, I have flashed Athena to Michy's R5.1. No change.. the voice skipping is still present ;(
I decided and will replace Jabra. I have two candidates: Nokia BH-902 or Motorola SH-7x0. As said Motorola before Motorola SH810 gives very good – no distortion – voice! Will see how the Nokia behaves. Any pros and cons for each???
Thanks guys for your help.
Uros
Yes, same effect here, I'm using the Jabra 8010 also and have sometimes the same problem. From my point of view it is a jabra problem, not a ameo / athena nor a ROM problem.
After updating on radio 1.58 I have some problems with the connection to my Pioneer carraudio Sytem (used as a handsfree set) also. So I've decided to go back to 1.50, after that I will update on michyprima and check it....
Kind regards
Andreas
Hi all, I'm new to this forum, but I have learned a great deal from you guys & gals! Hail to all!
I have the same problem with my U1000 & bt8010 under Radio 1.57 & 1.5.
For me, the problem seems less noticeable if I:
1. stand / sit STILL (sigh...)
2. have more ram to the system (no big TODAY plug-ins like spbDiary)
In theory the 8010 is perfect for big dogs like the athena. (gosh i love the phonebook and the music ... even mono makes me happy ...)
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
tootallk2000 said:
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
Click to expand...
Click to collapse
tootallk2000,
I have been using the FW 1-40-0 for more then a year now and compared to older FWs it does not make a difference
Uros
In my post #12 I claimed I had "solid connection with my blue tooth". I spoke too soon. The first time I played music on Pocket Music I got lots of skipping.
This was also a problem discussed at length last year. I did a reg search on "priority256" and found that the decimal number was 131.
I changed it to 256 and NOW I have "solid connection with my blue tooth". I have not had a single skip in 15 minutes of playing music.
OOPS - I just got a 1/2 second skip.
on my post at #6, i also spoke too soon. when i tested skype at our office (faster dsl connection), the voice is smooth, no skipping. i guess it was just an internet connection problem.