For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
I'm going to give it a try later on... Then i put here the veredict. :wink:
I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
Click to expand...
Click to collapse
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
motowiz said:
For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
Click to expand...
Click to collapse
Hi,
do you see any problem for installation into an ITA device ?
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
Click to expand...
Click to collapse
I haven't take any files is the same as the mamaich (you can find it in this http://forum.xda-developers.com/viewtopic.php?t=13588 post). Rom ver 2.06, but I inserted intelidialer and intelipad and also QTEK's splash screen.
Hi,
do you see any problem for installation into an ITA device ?
Click to expand...
Click to collapse
Don't know only tried in QTEK 2020...
Sorry
I there
And where is the link to download the files?
Best regards
Anonymous said:
I there
And where is the link to download the files?
Best regards
Click to expand...
Click to collapse
You must be logged in to download...
it keep given me error msg
error country code
what can i do
i have 1.
1.72
sorry
it says
device ID error
my rom is designed for i-mate and my ppc is qtek 2020
is this is the problem
hi. i need help to install this upgrada
i have qtek 2020
1.72.00 wwe
1.72.82 extrom
this upgrade is for i-mate
when i try install this upgrade it keep gives me error 100 country error
or
error 120 device id error
Related
Hi,
I have upgrade my qtek to i-mate 1.52.00WWE.
I have tried to upgrade to the new Dangaard 1.60.21WWE
But I got the country code error.
Anyone that can help me upgrading.
Thanks in advance
JoseF
Qtek2020 upgrade from i-mate 1.52.00WWE to Dangaard 1.60.21
Try this:
Works only for upgrade from i-mate (any version) to Dangaard (Qtek) 1.60
1. Download the Dangaard ROM image @ http://goztreh.free.fr/eng.exe
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Grtz,
Jos
Thanks Jos
It work´s
One more time Thank you.
JoseF
Thanks Jos
It work´s
One more time Thank you.
JoseF
Hy Smartpocketpclers
Ive just got a little question for allm you cracks out there.
On my m1000 ive got Orange specific apps such as Orange Backup or Orange Update.
Now iff i upgrade to lets say some other rom higher then 1.66 WWE
Will i still be able touse these Orange specific programs?
if not is there a way to get them back?
Ive done a little search on here but didnt find a sure answer.
any help is cool)
Thanx
Yes you can.
Just identify your cabs in the Extended Rom, which are from Orange, and copy them to your PC.
After ROM upgrade, you will add these cabs to the new extended rom.
High again
Ok thanx good idea but how dio i do that? ahhhh wait ill check the forums........ :wink:
Thanx man :lol:
peace
Ok after searching some on here ... i didnt find it.
Can you explain thge prosess to me?
Thanx
peace
UnRAR the exe ROM file (right-click on it, you must have Winrar), you will find 7 files.
Install ER2003Edit (attached), then run it and Open (enter codes below), not with the Auto option, the ms_.nbf file. There, you change Qtek to Orange, then you save. Before you save, if you want, you can edit also the splash screen and the Extended rom. Anyway, once saved, run HimaUpgradeUt.exe and all wil be working fine.
The codes :
ms_.nbf : 0x20040305
NK.nbf : 0x20040304
radio_.nbf : 0x20040306
Heys wow nice. Thanx a lot for that quick help and answer.
Hmmm. Ill try that tonight or tommorrow. exelent.
By the way.. would you sugest to upgrade or wait until the 2003 SE release?
The difference between the ROMS. Is it big?
SPVlover said:
By the way.. would you sugest to upgrade or wait until the 2003 SE release?
Click to expand...
Click to collapse
Until what ??? Sweet waiting, dream on !
You dont think it will be released?
hmm i think it will.
Orange is very motivated in the Smartphone and PPC wordl and will continue to boost.
I think beginning of 05 we will see a update :lol:
They don't have any reason to loose money for update. You take your wishes as reality. XDA III will have SE, that's all. Of course PPC world will continue to boost, but with new buyers, not with ancient buyers.
SPVlover said:
You dont think it will be released?
hmm i think it will.
Orange is very motivated in the Smartphone and PPC wordl and will continue to boost.
Click to expand...
Click to collapse
Well they never offered a WM2003 upgrade to owners of SPV and E100 Smartphones so I doubt very much that they'll offer the WM2003SE upgrade for the m1000 I have an O2 XDA on Orange UK and I don't expect O2 will offer it either!
Mi_ said:
Yes you can.
Just identify your cabs in the Extended Rom, which are from Orange, and copy them to your PC.
After ROM upgrade, you will add these cabs to the new extended rom.
Click to expand...
Click to collapse
Have a look to http://www.spv-qtek.com/ they have Orange poftware in a separate package and the Orange SPV M1000 1.72Fr Rom
(you have to be a registred user to download...)
I don't know whether it's legal or not so be carefull
Download of Spv M1000
Hi
I upgrae my Spv M1000 to Rom 1.72 as explane here
I feel a lose of Battary and some softwares are missing in the Programs.
Is it worth to download?
How can I do it?
Mi_ said:
UnRAR the exe ROM file (right-click on it, you must have Winrar), you will find 7 files.
Install ER2003Edit (attached), then run it and Open (enter codes below), not with the Auto option, the ms_.nbf file. There, you change Qtek to Orange, then you save. Before you save, if you want, you can edit also the splash screen and the Extended rom. Anyway, once saved, run HimaUpgradeUt.exe and all wil be working fine.
The codes :
ms_.nbf : 0x20040305
NK.nbf : 0x20040304
radio_.nbf : 0x20040306
Click to expand...
Click to collapse
Hi All
I have also Upgraded my M1000 from Orange 1.66 to German 1.72
There is a big difference. Battery have more life (I use also GPS - TomTom)
the way to do that is simple.
First install on your M1000 (Qtek) the Unlock_extendet Rom tolls. Copy your Extendet Rom on the HD of your PC. Download the Qtek 2020 ROM German. Extract from Extendet Rom ( on the PC) the Orange Cabs, put in the German Rom and Upgrade your Phone.
MY Phone is Equipped whit:
ROM Version: 1.72.01GER
Radio version: 1.17.00
1GB SD Card
If you want more information, contact me! 8)
Gollum said:
Hi All
I have also Upgraded my M1000 from Orange 1.66 to German 1.72
There is a big difference. Battery have more life (I use also GPS - TomTom)
the way to do that is simple.
First install on your M1000 (Qtek) the Unlock_extendet Rom tolls. Copy your Extendet Rom on the HD of your PC. Download the Qtek 2020 ROM German. Extract from Extendet Rom ( on the PC) the Orange Cabs, put in the German Rom and Upgrade your Phone.
MY Phone is Equipped whit:
ROM Version: 1.72.01GER
Radio version: 1.17.00
1GB SD Card
If you want more information, contact me! 8)
Click to expand...
Click to collapse
How do i upgrade, if i dont care about the Orange stuff in the extended rom? I have a danish Orange M1000. Which rom would be the best for me?
around the net have a version of I-Mate 1.72 ROM English, this is the best for everyone.
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.901 eDsubSofT (Nevermind the "1.60.36" that is in the nbf header)
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Post any comments
This thread is terminated. Plz see http://forum.xda-developers.com/viewtopic.php?p=65410 for the sucessor
Hi Edsub,
I have just downloaded 1.72.901 of yours and try to upgrade my mda 2 from t-mob.
what i have is te last beta version of t-mob 1.72.wwe boot version is 1.02
when i try to upgrade it with your version i get the following error
ERROR 122: EXTENDED IMAGE FILE CHEKSUM ERROR
Can you tell me what is it I am doing wrong???
Thanks
Hello edsub,
Does the 1.17 Radio version works with the 1.72 Fra, or it needs a french 1.17 Radio ?
Is that possible to upgrade only the radio ?
You can use this radio with your device. No language specifics in it.
(as I was told)
The checksum suprises me.
I can open the ms_.nbf with er2003edit with the normal key.
can you?
edsub said:
You can use this radio with your device. No language specifics in it.
Click to expand...
Click to collapse
Ok, and is it possible to install the 1.17 alone, without upgradeing all the device ?
Did you notice differences between 1.14 and 1.17 ?
You can upgrade every part separately from the others.
Just delete the NBF's you dont want to upgrade
Radio.nbf = Radio ROM
NK.nbf = OS ROM
MS_.nbf = ExtROM
Does this upgrade of the Radio only requires a hard-reset at the end ?
did a radio upgrade only
(removed the OS and Extended rom bkf files).
Device is dead (displays SERIAL after Cold Reboot).
Recommandation: don't do RADIO only, upgrade OS + Radio + Extended Rom whatever you're told.
btw, Extended Rom is corrupted.
I noticed the extROM was not OK.
Just uploaded a new archive wich should do the job ok.
@tde: oops, I just read that on the wiki-page
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing?version=8
no problem edsub, I should have read it too before starting flashing... this is not my first upgrade so I have no real excuse
just back to my old imate 1.72WWE, it's been a while since I didn't flashed my device, this rom is really OK.
@tde, do you mean you have succesfully installed my roms or did you revert to your own?
edsub,
Are you saying that the extended rom you have developed is not ok?
Is this ROM save to load on MDA II, which has only had T-Mobile ROMs on it?
edsub, is this the ROM I requested?
Edsub
I re-flashed with the latest Rom from IMATE I had (1.72WWE), but upgraded the radio to 1.17 by the way.
Now I have to recreate a new extended ROM ...
@ Gratefuled: My ExtRom was ok, only the NBF file to be used to flash was corrupted. This means that in the first upload version of the upgrade archive (see first post inthis thread) you could simply NOT upgrade the extRom (upgrade utility refuses it).
The currently available RUU172901_eDsuBsofT.exe should be ok.
@tde: The ExtRom in the new version should be ok. The OS rom inside my archive is the same as your iMate OS rom (Qtek and iMate 1.72.00WWE OS roms are the same).
@all: Still waiting for comments on the newly uploaded archive
Home-cooked 1.72.901 upgrade package (1.72.00/1.17.00
@ Edsub,
Hi,
I have succesfuly flashed my mda 2 with your rom. It worked just fine i wil try this further and post my coments.
thanks,
keep up the good work.
I am a new qtek 2020 user.
Can i use this rom for the provider proximus here in belgium ?
Basically you can. But for the extended rom contents I would advise you to get in contact with others on Proximus for the specific network (ie GPRS) settings.
Also, you might not like the T-Mobile startup splash screen.
And: You HAVE to update the "country id" (=operator/device identifier)
.
What bootimage does it have?. Does it has the T-mobile BETA bootimage?. I don't mind the T-mobile image, just not the beta part
It has the 'normal'(ie not beta) T-Mobile boot-image.
Images were taken from 1.60.36 rom
Is this upgrade the Windows Mobile 2003 SE equivalent?
So when flashed it has the same software features as described for the Qtek 9090?
When flashed to Tmobile, can I still change the settings to telford? Has anyone don that already?
thanks
Today (22/8/06) :
Dopod 838 Pro :
http://www.dopodasia.com/download/HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
i-Mate JasJam :
ftp://ftp.clubimate.com/JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.zip
Thanks¡¡¡¡¡¡
thanks man. downloading now
Re: Dopod 838 Pro and i-Mate JasJam rom update available 22-
Thanks! Wiki updated
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
can anyone post the rom info, build details which AKU version and whats new in this rom.
Is the I-mate rom locked in any way?
I feel like trying it out :>
Anyone tried these?
Just flashed the i-mate rom.
Seems to work fine.
ROM version 1.20.305.3
ROM date 07/21/06
Radio version 1.07.03.10
Protocol cersion 32.41.7010.02H
Os build same as before.
Gonna play with ext rom stuff a bit later.
Just noticed that the default font seems a bit smaller then usual (normally I need to make it a bit smaller myself)
Now Ill test if its really Spb Pocket plus that makes opening of windows folder take forever. At this point (nothing installed) it opens before "the wheel" has gone even halfway around
edit. extrom seems to have a lot of useless stuff.
Here the iMate Infos
ROM: 1.20.305.3
Date: 07/21/06
Radio: 1.07.03.10
Protocol: 32.41.7010.02H
ExtRom: 1.20.305.104
maybe for updating WiKi
ooops jeezus was faster :lol:
fgro said:
Here the iMate Infos
ROM: 1.20.305.3
Date: 07/21/06
Radio: 1.07.03.10
Protocol: 32.41.7010.02H
ExtRom: 1.20.305.104
maybe for updating WiKi
Click to expand...
Click to collapse
Updated few minutes agoy already.
Hmm, installed SPB pocket plus.
Before entering windows folder took about 1/4 turns of "the wheel", now
it takes 2/4. Gotta keep an eye on it. Seems like a lot of files slow it down a lot.
jeezus said:
fgro said:
Here the iMate Infos
ROM: 1.20.305.3
Date: 07/21/06
Radio: 1.07.03.10
Protocol: 32.41.7010.02H
ExtRom: 1.20.305.104
maybe for updating WiKi
Click to expand...
Click to collapse
Updated few minutes agoy already.
Click to expand...
Click to collapse
Could you install the Dopod and post the Rom Infos? LOL ... i forgot to write them down. I had them installed :shock: but overflashed with the iMate ....
please update the Wiki!!! and the download location. The original ftp is too slow thats why i uploaded the ROMs to the ftp.
HER_DopodAsia_1237074_1060010_WWE_SHIP
JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
Thanks
fgro said:
Could you install the Dopod and post the Rom Infos? LOL ... i forgot to write them down. I had them installed :shock: but overflashed with the iMate ....
please update the Wiki!!! and the download location. The original ftp is too slow thats why i uploaded the ROMs to the ftp.
HER_DopodAsia_1237074_1060010_WWE_SHIP
JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
Thanks
Click to expand...
Click to collapse
Good work, the orginal ftp was slow as h*ll.
Too tired to try the dopod rom, gotta have phone with apps tomorrow ready.
YOu can update the wiki yourself too.
someone is uploading the imate rom too ... grmpf --- can you tell them the rom is already up?
:shock:
jeezus said:
fgro said:
Could you install the Dopod and post the Rom Infos? LOL ... i forgot to write them down. I had them installed :shock: but overflashed with the iMate ....
please update the Wiki!!! and the download location. The original ftp is too slow thats why i uploaded the ROMs to the ftp.
HER_DopodAsia_1237074_1060010_WWE_SHIP
JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
Thanks
Click to expand...
Click to collapse
Good work, the orginal ftp was slow as h*ll.
Too tired to try the dopod rom, gotta have phone with apps tomorrow ready.
YOu can update the wiki yourself too.
Click to expand...
Click to collapse
ok ... done!
are these the original shipping ROMs (from the original batch of units) or are these ROM upgrades?
if they are upgrades, do they fix the battery meter only going in 10% increments? Can you now see the E (for EDGE) icon like on the Wizrad? Does it fix the issue where the roaming icon is always on?
thanks for taking the time to answer!
Can anyone confrim which AKU build these roms are.
i-Mate JasJam Rom
Is anyone else having their Hermes switch on when going from GSM to UMTS using the latest i-Mate ROM? I've tried it with the extended ROM loaded, without it loaded and it behaves the same way both ways. I'm actually going to the Dopod WWE ROM to avoid this behavior so if anyone has an idea, it would be greatly appreciated.
Steven
jeet said:
Can anyone confrim which AKU build these roms are.
Click to expand...
Click to collapse
As mentioned OS build (including aku) same as before.
Arabic ROM for JASJAM is also available from i-mate FTP.
ftp://ftp.clubimate.com/JASJAM_Arabic_1.20.305.3_1.20.304.104_1.07.03.10_ship.zip
It's CHT ROM, not WWE version, but may be useful for someone have U1000 CHT stuck at bootloader.
Some information:
Radio: 1.32.00.10
Ext ROM: 1.24.709.105
Download here: http://www.dopodasia.com/Dopod_tw/ (must register and login).
29a said:
It's CHT ROM, not WWE version, but may be useful for someone have U1000 CHT stuck at bootloader.
Some information:
Radio: 1.32.00.10
Ext ROM: 1.24.709.105
Download here: http://www.dopodasia.com/Dopod_tw/ (must register and login).
Click to expand...
Click to collapse
i have upgrade it already, only 2 things added, one is to fix the region time bug, another is to add a custom software call My Connect, (something like Vodafone Live where you can download ringtone, wallpaper......etc)
wu5262 said:
i have upgrade it already, only 2 things added, one is to fix the region time bug, another is to add a custom software call My Connect, (something like Vodafone Live where you can download ringtone, wallpaper......etc)
Click to expand...
Click to collapse
no need register
http://www.dopodasia.com/download/U1000ROMcode_DOPODTW_070320.exe
Thank you for directly link
allway said:
no need register
http://www.dopodasia.com/download/U1000ROMcode_DOPODTW_070320.exe
Click to expand...
Click to collapse
Please people, if you don't have a DOPOD U1000 Taiwan version, then don't update to this one, it won't work and will brick your device.
question for you WU I bought a dopod u1000 with the wwe rom on it. What country code would this have?
jasonmoe said:
question for you WU I bought a dopod u1000 with the wwe rom on it. What country code would this have?
Click to expand...
Click to collapse
don't know the country code, but this update is not for you, what you need is the same update but for WWE, which country did you buy it from? you should be able to register on the DOPOD Official website and get the Update from the member section.
If you have WWE version (DOPOD001?), the official rom code can be downloaded at
http://www.dopodasia.com/download/R...E_1.24.707.3_105_6275_1.32.00.10_108_Ship.exe
The ROM in the first post only work for DOPOD601 (CHT version).
29a said:
If you have WWE version (DOPOD001?), the official rom code can be downloaded at
http://www.dopodasia.com/download/R...E_1.24.707.3_105_6275_1.32.00.10_108_Ship.exe
The ROM in the first post only work for DOPOD601 (CHT version).
Click to expand...
Click to collapse
device information says athe100 box says (hong kong(wwe)
29a said:
If you have WWE version (DOPOD001?), the official rom code can be downloaded at
http://www.dopodasia.com/download/R...E_1.24.707.3_105_6275_1.32.00.10_108_Ship.exe
The ROM in the first post only work for DOPOD601 (CHT version).[/QUOTE
how could i know my dopod is 001 or 601 ?
and if i upgrade to the new CHT version and apply faisal`s upgrade could i get my connect in english as well ?
thanks..
Click to expand...
Click to collapse
There's a simple method. You must set device in bootloader, by press RESET while press CAMERA button.
You can see the tri-color screen, show some info as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.07.0000
Then disable ActiveSync USB connection on your PC, connect U1000 with PC via USB cable. Now you can run MTTY, select USB0001 etc.. From mtty command prompt, type commands below, and you get the info you need.
Cmd>
Cmd>info 2
HTCSDOPOD601 «Jú½HTCE
Cmd>info 3
HTCSATHE10000
Cmd>ResetDevice
Click to expand...
Click to collapse
Note: if your mtty hangup after [info 3], don't panic, press reset to reboot U1000.
@ahmadfarid: If you install a CHT ROM Code to WWE U1000, upgrade processs stop at 1%, with Invalid vender ID error code, and your device reboot to Windows. I think it do not harm your device.
@29a :
Actually i want to flash CHT to WWE ROM..i tried it before and stuck at the flash utility mode (bootloader)....
hi i have dopod u1000 WWE hong kong english version which rom should i download for my device
hi i have dopod u1000 WWE hong kong english version which rom should i download for my device will you guys give me a link to i download that upgrade for my device.
emilnaeri said:
hi i have dopod u1000 WWE hong kong english version which rom should i download for my device will you guys give me a link to i download that upgrade for my device.
Click to expand...
Click to collapse
go register yourself to DOPOD HK, and you can download the file there