CALLER_ID_WWE_RC10.CAB ??? - MDA II, XDA II, 2060 ROM Development

CALLER_ID_WWE_RC10.CAB
this installation file .. is it newer than the 1 pre installed in the 2.06.00 wwe ROM? tnx

yes, it's the newest...ver. 1.20 build 17957, that's actually from extrom xda2 mini/I-mate JAM & compatible with all himalaya device.

Related

Home-cooked 1.72.901 upgrade package (1.72.00/1.17.00)

I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.901 eDsubSofT (Nevermind the "1.60.36" that is in the nbf header)
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Post any comments
This thread is terminated. Plz see http://forum.xda-developers.com/viewtopic.php?p=65410 for the sucessor
Hi Edsub,
I have just downloaded 1.72.901 of yours and try to upgrade my mda 2 from t-mob.
what i have is te last beta version of t-mob 1.72.wwe boot version is 1.02
when i try to upgrade it with your version i get the following error
ERROR 122: EXTENDED IMAGE FILE CHEKSUM ERROR
Can you tell me what is it I am doing wrong???
Thanks
Hello edsub,
Does the 1.17 Radio version works with the 1.72 Fra, or it needs a french 1.17 Radio ?
Is that possible to upgrade only the radio ?
You can use this radio with your device. No language specifics in it.
(as I was told)
The checksum suprises me.
I can open the ms_.nbf with er2003edit with the normal key.
can you?
edsub said:
You can use this radio with your device. No language specifics in it.
Click to expand...
Click to collapse
Ok, and is it possible to install the 1.17 alone, without upgradeing all the device ?
Did you notice differences between 1.14 and 1.17 ?
You can upgrade every part separately from the others.
Just delete the NBF's you dont want to upgrade
Radio.nbf = Radio ROM
NK.nbf = OS ROM
MS_.nbf = ExtROM
Does this upgrade of the Radio only requires a hard-reset at the end ?
did a radio upgrade only
(removed the OS and Extended rom bkf files).
Device is dead (displays SERIAL after Cold Reboot).
Recommandation: don't do RADIO only, upgrade OS + Radio + Extended Rom whatever you're told.
btw, Extended Rom is corrupted.
I noticed the extROM was not OK.
Just uploaded a new archive wich should do the job ok.
@tde: oops, I just read that on the wiki-page
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing?version=8
no problem edsub, I should have read it too before starting flashing... this is not my first upgrade so I have no real excuse
just back to my old imate 1.72WWE, it's been a while since I didn't flashed my device, this rom is really OK.
@tde, do you mean you have succesfully installed my roms or did you revert to your own?
edsub,
Are you saying that the extended rom you have developed is not ok?
Is this ROM save to load on MDA II, which has only had T-Mobile ROMs on it?
edsub, is this the ROM I requested?
Edsub
I re-flashed with the latest Rom from IMATE I had (1.72WWE), but upgraded the radio to 1.17 by the way.
Now I have to recreate a new extended ROM ...
@ Gratefuled: My ExtRom was ok, only the NBF file to be used to flash was corrupted. This means that in the first upload version of the upgrade archive (see first post inthis thread) you could simply NOT upgrade the extRom (upgrade utility refuses it).
The currently available RUU172901_eDsuBsofT.exe should be ok.
@tde: The ExtRom in the new version should be ok. The OS rom inside my archive is the same as your iMate OS rom (Qtek and iMate 1.72.00WWE OS roms are the same).
@all: Still waiting for comments on the newly uploaded archive
Home-cooked 1.72.901 upgrade package (1.72.00/1.17.00
@ Edsub,
Hi,
I have succesfuly flashed my mda 2 with your rom. It worked just fine i wil try this further and post my coments.
thanks,
keep up the good work.
I am a new qtek 2020 user.
Can i use this rom for the provider proximus here in belgium ?
Basically you can. But for the extended rom contents I would advise you to get in contact with others on Proximus for the specific network (ie GPRS) settings.
Also, you might not like the T-Mobile startup splash screen.
And: You HAVE to update the "country id" (=operator/device identifier)
.
What bootimage does it have?. Does it has the T-mobile BETA bootimage?. I don't mind the T-mobile image, just not the beta part
It has the 'normal'(ie not beta) T-Mobile boot-image.
Images were taken from 1.60.36 rom
Is this upgrade the Windows Mobile 2003 SE equivalent?
So when flashed it has the same software features as described for the Qtek 9090?
When flashed to Tmobile, can I still change the settings to telford? Has anyone don that already?
thanks

WM2003SE Upgrade for QTEK 2020 WWE

For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
I'm going to give it a try later on... Then i put here the veredict. :wink:
I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
Click to expand...
Click to collapse
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
motowiz said:
For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
Click to expand...
Click to collapse
Hi,
do you see any problem for installation into an ITA device ?
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
Click to expand...
Click to collapse
I haven't take any files is the same as the mamaich (you can find it in this http://forum.xda-developers.com/viewtopic.php?t=13588 post). Rom ver 2.06, but I inserted intelidialer and intelipad and also QTEK's splash screen.
Hi,
do you see any problem for installation into an ITA device ?
Click to expand...
Click to collapse
Don't know only tried in QTEK 2020...
Sorry
I there
And where is the link to download the files?
Best regards
Anonymous said:
I there
And where is the link to download the files?
Best regards
Click to expand...
Click to collapse
You must be logged in to download...
it keep given me error msg
error country code
what can i do
i have 1.
1.72
sorry
it says
device ID error
my rom is designed for i-mate and my ppc is qtek 2020
is this is the problem
hi. i need help to install this upgrada
i have qtek 2020
1.72.00 wwe
1.72.82 extrom
this upgrade is for i-mate
when i try install this upgrade it keep gives me error 100 country error
or
error 120 device id error

WM2k5 [1].65b.96WWE for i-mate PE

I have read all the posts in regards to upgrading but I still need to make a clarification. Will the above upgrade which I have downloaded from http://buzzdev.net work for i-mate PE with the following specs:
ROM 1.72.00WWE
Radio: 1.14.00
ExtROM: 1.72.800
No impact on local telecom provider or with the fact that the device is i-mate and not xda?
Is [1].65b.96WWE the latest version?
yes , this will works fine , but , upgrade too your radio to 1.17 ...
1.65b is the latest u^grade , but some bugs are found ... if you wait few weeks ... maybe days , 1.70a will be released ...
Hi guys,
just for info,
i have an imate pocket pc.
i downloaded the himalaya radio 1.08 and the WM2k5_1[1].60c.00WWE_XDA2_HIMALAYA
and i used himaupgrade no id
i am not able i cluck on upgrade it gives me erroe at the end?
any idea how to flash the imate?
Thanks

Latest WWE ROM (1.18.255.108)

According to the Wiki, the latest shipped WWE unbranded rom is 1.18.255.106, and my phone has the .108, so I just uploaded the upgrade package for that ROM (which I got from the support site (one of two here in Finland)) to the upload section of the ftp, in case someone wants it.
This version is for the "Finland and the Baltics" area, and the phone itself has the Scandinavian keyboard layout.
- Pud.0
Thanks for the shipped rom, it is exactly the same ROM version 1.18.255.3 and the same radio version 1.03.03.10, the only change is on the shipped Extended ROM version from 1.18.255.106 to 1.18.255.108.
I've updated the wiki and moved the file to safe heaven:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
wwe unbranded
Hi I do not really understand the layout from the chart. I would like the latest unbranded rom in English for my phone (its currently German) can you please help,
thank you
ROM 1.18.257.2
radio 1.03.03.10
protocol 32.34.7010.01H
ext rom 1.18.257.9620
OS 14955.2.3.0
rgogh said:
Hi I do not really understand the layout from the chart. I would like the latest unbranded rom in English for my phone (its currently German) can you please help,
Click to expand...
Click to collapse
All roms are 'branded', also the HTC TyTN rom is branded by HTC.
Acording to the info *now* on the wiki (it will change on the future), the newest ROM is Cingular 1.34.502.1, which is dated 2006-09-21. This ROM has radio version 1.16.00.00, but the i-mate ROM dated 2006-09-08 has a newer radio version 1.20.31.10 which has been extracted so you can flash it separately if you want it on your device. The latest AKU build for the Hermes is on Cingular's ROM 1.31.502.1 which shows OS Build 14989.2.6.0, this means this is an AKU 2.6 while all the other available ROMs have AKU 2.3.
To remove the operator branding and have an 'unbranded' rom you just need to softreset before the ExtROM is installed after the device is hard-reseted.
You can install Cingular's 1.34 or 1.31 ROM (depending if you prefere AKU 2.3 or AKU 2.6) with I-mate 1.20 radio and HTC 1.18.255.106 ExtROM which will add HTC's tytn branding to your phone. This should be "the latest" rom now.
For more info read the wiki:
Upgrading Frequently Asked Questions
Available Original Shipped ROM Versions
Available Extracted Radio Upgrade Only
Available Extended ROM Versions
pof said:
Thanks for the shipped rom, it is exactly the same ROM version 1.18.255.3 and the same radio version 1.03.03.10, the only change is on the shipped Extended ROM version from 1.18.255.106 to 1.18.255.108.
I've updated the wiki and moved the file to safe heaven:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Click to expand...
Click to collapse
I successfully downgraded, CID unlocked and then upgraded to swap from Swedish to English, this worked like a CHARM!!
BUT!! The keyboard hacks does NOT seem to work,, heeeeeeeeeeeeeelp!!
@Pof's quote below
"To remove the operator branding and have an 'unbranded' rom you just need to softreset before the ExtROM is installed after the device is hard-reseted."
is this mean -
that i need to do first is perform the Soft reset after i have completed or successful flash a ROM from the WIKI shiped ROM list,
then make the unhide ExtRom, then remove the ExtRom operator brand, from the Extended Rom folder, then install the "unbranded" ExtRom (execute the unbrand CAB file), then the last step is do the Hard reset.
please advice.

ExtendedROM HTC with i-Mate JASJAM

Hi all, I want to update my i-Mate JasJam:
ROM 1.31.305.2
ExtendedROM 1.31.305.104
Radio 1.41.00.10 (update with Hard SSPL)
with a new release HTC:
ROM: 2.11.255.1
ExtendedROM: 2.11.255.102
I create a rom with http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 giude, but I read (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms) there is a problem with the extended ROM HTX with i-Mate.
Can I do the upgrade in safe mode?
Thanks.
Tony72

Categories

Resources