Does anyone know where I can purchase an antenna adapter cable for my PDA2K? I travel in fringe areas alot,and need to be able to hook up the outside antenna on my car. I could make one if I knew what the connector on the PDA2K is. If anyone knows what kind of connector is on the back under the rubber plug, PLEASE let me know!!
Thanks 8)
I think Brodit do one. www.brodit.com
try looking under t-mobile MDA III.
anyone know any distributors for brodit in the US that carry this adaptor?
Antenna Adaptors available in UK
You can get antenna adaptors for the PDA2K from a guy called Mark Burt who runs a company called www.boatersphone.co.uk they also do loads of other gear for working in fringe areas where their is not great signal.
Related
hi everyone
ive just bought myself a XDAIIs pda, ive set up TOMTOM 3 sat nav and have bought a BT TomTom GPS receiver. sat navs working perfectly. but got one BIG problem, i cant find myself a decent car kit. ive tried the Arkon CM531, didnt like it-too many wires and very messy, got carkit with fixed charging through the cig-lighter- did not fit my phone as cradle was for XDAII.
Im really stuck so could anyone please help me. im looking for a car kit which will allow me to slide my xda2s in and out easily, hold it in place and also charge it at the same time whilst its in the cradle.
ANY SUGGESTIONS
Same here ! I could not find anything decent. Any suggestion welcome !
xda2s car cradle
did you find one ?
I GOT THE ANSWER
GOOD CAR CRADLE
TRY
WWW.ARKON.COM
CHEERS
VENKAT
Try www.brodit.com, they produce a few different versions ie. power, power/gps or passive. there not bad looking either!
How do you deal with the Arkon RF/speaker interference?
venkie9910,
sorry for repeting my question, but I did not go an aswer yet:
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
Thanks,
Chris
I got the brodit one from handnav with a pro-clip and it fits perfectly and looks good (once you've removed the tacky brodit sticker). Only problem is that the hard-wired version isn't available for the PDA2K yet and the cost! A bundle including the clip, holder and charger set me back £70, but you pay for what you get.
Hard wired one is now available with or without gps ps2 port, I have just ordered one with gps, cost £59.99 plus p+p, the pro clip for fitting to the dash cost £15.99. hopefully it will arrive next week
Hi all, I have this Bordit 849582 for sale: http://w3.easytrade.net/brodit_shop/product.dip?item=1225583&fid=1225727
Just buy yourself a Rikaline GPS mouse . Attach it in your car and slide your Qtek 2020 into the cradle and start navigating!
Interesting? Mail me or just reply!
I think people hurry into buying a bluetooth GPS which leaves them with only a hardwired option for in-car. (some exceptions with multiple bluetooth capability) I prefer the inverse combination. If you're using your nav software you need to see your phone so its going to be in a cradle anyway. If you just pop down the shops you can leave your phone in your pocket and your bluetooth carkit still works.
I'd go for a cradle with GPS built in, or a connector for extrnal GPS. Preferably powered (battery hungry these PDAs!) then BT carkit.
But be careful with carkit choice. Some have the awful echo problem. Can't add much more than that except that an M2000 and Nokia CK-7W is NOT a good combination :-(
There is a decent carkit coming that supports talk function and wired GPS. It is already available for the 2020 and its coming for the 9090. It`s based on a CMPC Carcomm cradle. If everything goes right it should be released next week. I will buy it definatly and will keep everybody posted.
TomTom Car Mount for XDA IIs / MDA III / SPV M-2000 etc tec
try this - can be hard wired or use ciggy lighter connection....
http://www.pdamods.com/proddetail.asp?prod=A11XDA2SMNT&cat=23
regards
Alan
Cheap and Effective Magnetic Mount
Hi,
how about trying a magnetic mount?
http://www.tangshop.com/magnetic-cell-phone-holder.html
Cheap, effective and neat (inconspicuous), but you have to stick the metallic mounting plate onto the back of your PDA (somewhere in the middle, preferably on the battery). Fortunately, the sticky pads are from 3M so they are strong and the residue can be removed with normal dabbing of scotch tape. The metal plate is thin so it does not affect the fitting to existing casings.
The part that sticks to the dash is using the same adhesive too.
I've tried this with a Bluetooth GPS and the XDA IIs on the dash, and the magnet is strong enough to hold the PDA in place even through fast corners and bumps ...
Cheers,
David
Another option is from this company:
http://www.thb.de
However I couldn't find a picture of the cradle.
I have however seen the cradle in the flesh and is it very very nice... even has DSP processing for the handsfree.
It is very pricey though.
Forgot to also add this link.... has a few pictures
http://www.ptp.net.au/s8_cradles_XDA_Imate.html
I do not know if they have one for the tom tom as I do not know what a tom tom is, but ProClipUSA.com has some great PDA holders for the iMate PDA 2K
Raptor
Newbie question maybe but did do some searches first and couldn't locate any info.
I have just bought XDA IIs and I'm looking for a car mount for it. There are plenty out there for the XDA II but not yet for the XDA IIs, is there any physical diffeence between the bottom of these units, i.e the connecting/charging port.
Ideally I want one that will also charge the PDA and a GPS unit when I eventually get one. I have seen a Carcomm holder/charger for the XDA II that looks good but unsure if it's suitable. (available from TotalPDA, their product ref 4738)
Effectively two questions here as I try to solve one problem, any advise appreciated.
Cheers :lol:
Similar BUT different
The position, general design and connector pinouts for the bottom port are identical from the first Wallaby to the new Blue Angel, BUT the physical connector on the Blue Angel (XDAIIs, MDAIII, SX66) has a slight alteration from the connector in previous generations. There is a small keying protrusion on one side of the Blue Angel accessory port. Several owners of Blue Angels have been forcing the older type connectors into the Blue Angel and while the pinouts and connectors themselves mate up, doing this places mechanical strain on the connector in the Blue Angel as it has a mating protrusion that normally would fit into the keyway on the plug, but now is mechanically forced outward. Over time, this has a strong potential for damaging the connector on the Blue Angel.
Check out this thread as it has pictures of what I am describing http://forum.xda-developers.com/viewtopic.php?t=12092
So, at this time, I have not found ANY Blue Angel specific accessories(ie designed to mate with the newer connector). In time these surely will appear. In the meantime, a little work with a Dremel tool can create the keyway in the plugs on older generation accessories and doing so will no harm those accessories but it WILL protect the connector in the Blue Angel.
BTW, I have both the first gen and the last gen, so I have accessories whose connector will have to be modified
david
I am still using a Clic on car kit I had for my Ipaq 5550, i purchased a new cable when I got the XDA2, and then used some black hard foam on the cradle, as the xda2 was a little thinner. Then when upgrading to the XDA2s, it used the same connection, and fit just as snug.
Seidio is supposed to be releasing a car kit for the PDA2K sometime this month. Check out http://www.seidioonline.com/
Rajesh
Car Mount
Brodit supply one - in the UK use handnav.co.uk :
http://www.handnav.co.uk/search_results.php?brand_only=true&st=Brodit
or on brodit :
http://w3.easytrade.net/brodit_shop/product.dip?item=1244372&fid=1244565
I use this and it works fine.
You need a car specific ProClip also from same website.
Car mount for XDA IIs
Hi, I have just purchased an Arkon car mount from ebay at £29.99 + £5 p&p. It has power and plugs for GPS I am using a Holux Bluetooth that I am powering from the auxillary power port on the unit, it has sockets for hard wire GPS receivers as well and a buit in amplified speaker. Go into ebay and key in XDA car mount. The same unit was £55 on Tottenham Court Road, I will say though that the power conector to the IIs was stiff so the previous guy saying about the difference is probably correct. Will get the Dremil out tonight.
Thanks for all the replies, I have now ordered an Arkon CM532 from E-bay and feel (fairly) confident of modifying the connecter to suit my XDA IIs as required.
Merry Xmas to you all.
How do you deal with the Arkon RF/speaker interference?
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
As it turns out I didn't order a mount as an e-bay company i had already approached came back saying they were hoping to release a specific mount for the XDAIIs around about now.
I've just e-mailed them to see if they've got them in yet.
Keep us updated!
Chris
Arkon CM531 works with o2 XDA IIs
Hi Guys, I've been using my Arkon CM531 (made for the o2 XDA II) fine with my new o2 XDA IIs. This is a relief as it means that I won't have to dish out more money! Whoo hoo!
I use a mag mount kit which is £8.99 at PDA Mods http://www.pdamods.com/proddetail.asp?prod=WSMMOUNT&cat=23
On the XDAII i put the small metel plate supplied under the back cover and that works perfectly. In the XDAIIs there is no battery cover so i have ordered a proprota alu-leather case http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
which has a magnetic mount built in. I have not received it yet.
I then use a Wired GPS that i brought from PDA Mods for the XDAII. This also powers the XDAII. This fits and works perfectly in the XDAIIs.
If you have both devices and look closely at the XDAII & XDAIIs sockets there is a slight difference on the XDAIIs. But this is backward compatable. IE you can use any connector desiged for the XDAII on the XDAIIs but you can not use a connector designed specifically for the XDAIIs in the XDAII.
Just take a look at your power dongle for the XDAIIs it WILL NOT fit your XDAII. Strangely though on the cradle they fitted a backward compatible connector and not a XDAIIs specific one. So you can plug your XDAII into the XDAIIs cradle.
Anyone found a good car holder for the TyTN? I've looked through ebay and found a few and all of them have no charging/power connector. I don't know which one fits well. I'm looking for a good cheap holder with ot without a power connector. Any recommendations?
Try the Brodit range:
http://www.dsldevelopments.com
There's also a thread over at Modaco.com about their stuff:
http://www.modaco.com/index.php?showtopic=244140
Hope this helps.
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
penyekz said:
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
Click to expand...
Click to collapse
You could check out these links, they are from HTC Europe.
http://www.expansys.com/htc/p_htc_item.aspx?i=142066
http://www.expansys.com/htc/p_htc_i...www.expansys.com/htc/p_htc_item.aspx?i=142058
http://www.expansys.com/htc/p_htc_item.aspx?i=142059
Things to consider though is if on long journey the phone might need charging so make sure the mini usb has enough room for a car charger to be plugged in. I use the charger for Holux GPSlim 236 satnav receiver to charge both devices when in the car. The only other problem I had with my M2000 was when accelerating hard or going fast round corners the phone would be pulled out of the cradle in fact I tried loads of cradles so I'm hoping this smaller phone doesnt suffer the same problem otherwise it could be elastic band time again.
Looking at that cradle in the top link it looks like one of the bottom lugs will block access to the mini usb which is no good really. Oh well only one way to find out and thats go and buy it.
I bought one from a Vodafone shop. It's just known as a universal car holder. Cost a fiver and works great.
I can still access the mini usb and all buttons while it's fitted in there.
Hope this helps
I'm an XDA newbie, though not a stranger to PDA's (have had Axim X3, TRG Pro and PalmPilot).
I got my unit 2nd user as I needed a phone and PDA combined, but not enough cash for a new one.
I haven't got a Stereo headset for listening to MP3's.
I have seen the connector on the top for the handsfree unit and I have the mono mic and earpiece with 2.5mm plug; but what are the other connectors around the outside by the headset jack for? Is there a special adaptor for stereo?
Also, has anyone come across a good 'universal' charger at a reasonable price? I have a nice little universal battery charger (4 x AA) which has the USA flat pins as standard but these fold flat onto the unit and allow UK 13A or European 2-pin plug-top plates to be snapped on. Something like this for the XDA IIs would be ideal as I sometimes have to travel abroad.
Now if anyone's also come up with a *folding* Desktop USB cradle that would be really handy...
Look forward to hearing from you all
FYI, boxwave is now selling accessories for the Touch Cruise in the US. www.boxwave.com. Looks like they've got a cradle and some other accessories. I'm ordering my cradle now 8).
Dave
dfields said:
FYI, boxwave is now selling accessories for the Touch Cruise in the US. www.boxwave.com. Looks like they've got a cradle and some other accessories. I'm ordering my cradle now 8).
Dave
Click to expand...
Click to collapse
Nice spot. Thanks for the info. I fancy the cradle, the 3.5mm headset adaptor and the pair of retractable charge and charge/sync cables.
When you get the cradle could you please post back specifically on the power supply. It doesn't look like it from the pictures but there's just a possibility that the power brick is physically designed to be international, i.e. the prongs that plug into the wall socket are on a separate mounting so that they can be swapped for UK, continental Europe or other plug configurations (e.g. PalmOne do this). The spec on the site does at least confirm it is a universal voltage supply but the physical plug compatibility is a big issue.
If the adaptor is only supplied with a fixed US configuration then could you please confirm that the input voltage, current and tip polarity are pretty clear from the instructions or labelling on the cradle itself so that I know it will be easy to correctly set up a universal supply brick.
Thanks.
- Julian
Edit: I just noticed that Dave said above "... boxwave is now selling accessories for the Touch Cruise in the US". As an addendum/clarification for international readers, if you click through to the boxwave web site they do explicitly say in the FAQ section that "We ship our products worldwide."
I think the PS is for the US, but they also sell international adapter kits. I think they've even got a bundle that include the cradle and the international kits.
Dave
JulianL said:
Nice spot. Thanks for the info. I fancy the cradle, the 3.5mm headset adaptor and the pair of retractable charge and charge/sync cables.
When you get the cradle could you please post back specifically on the power supply. It doesn't look like it from the pictures but there's just a possibility that the power brick is physically designed to be international, i.e. the prongs that plug into the wall socket are on a separate mounting so that they can be swapped for UK, continental Europe or other plug configurations (e.g. PalmOne do this). The spec on the site does at least confirm it is a universal voltage supply but the physical plug compatibility is a big issue.
If the adaptor is only supplied with a fixed US configuration then could you please confirm that the input voltage, current and tip polarity are pretty clear from the instructions or labelling on the cradle itself so that I know it will be easy to correctly set up a universal supply brick.
Thanks.
- Julian
Edit: I just noticed that Dave said above "... boxwave is now selling accessories for the Touch Cruise in the US". As an addendum/clarification for international readers, if you click through to the boxwave web site they do explicitly say in the FAQ section that "We ship our products worldwide."
Click to expand...
Click to collapse
I got the leather sleeve. It is very nice...top quality. The soft reset button is somewhat covered by the leather...but not enough that it can't be used. That aside, it really is like a glove. You really done even notice it unless you have the belt clip attached.