Related
hello everyone
just got an xda1 from ebay and im in awe, its so different for other mobile phones :shock:
anyway need help
got Ezwap2.5 but don't have the tab for setting up mms msg why?
is this to do with me not uninstalling Ezwap2.0 first
also set up my o2 email on xda but it connect then ask me for the password (even though i've ticked save password) then it disconnect and reconnect again and it goes on like this but nothing else happens :?
Also although im in total awe of all those who have 'cooked' their own rom
a couple of questions
i've done this and got an .exe file, what next???
and has anyone got an ready cooked rom for o2 UK PC003 that they can let me have :?:
any help will be more than welcome :lol:
Hi rickyjune,
Welcome to xda-developers and congrats on getting an XDA. hopefully you won't be dissapointed. I can't help you with EZWAP but as far as cooking your own ROMS, it's quite easy and rarely goes wrong... if you use the SD Card method. There are numerous posts about this in the forum so I'll let you look them up. But briefly,
* Cook your ROM but choose the SD Card method, not the Program A. You can also cook the 2003 PPC version and it will work on XDA
* Get yourself an SD Card [minimum 32MB but as big a you can afford]
* Get yourself an SD Card reader, so your computer can read/write the card.
* Search for Jeffs tools for copying the SD ROM version onto an SD card.
* Use this tool to copy the ROM onto the SD Card. Don't use Windows explorer, it won't work.
* Put the SD Card into your XDA and go into bootloader mode and follow the instructions
It is worth the extra hassle, trust me.
Note: You will loose everything on your XDA by updating your ROm or just by going into bootloader mode [I think]
Regards
Keith Burke
Dublin, Ireland
EZWAP 2.5 is so complex for just MMS ... better to try MMS Composer 1.6.12 or higher ... it's more simple in setup and more efficient
I presume you are using an O2 email account. I had a similar problem until I realised that it can take about fifteen minutes or so for your O2 email session to time out, if you haven’t logged out properly.
i.e. if you are reading your O2 mail on your desktop, and just close it down using the X button, then you are still logged in on the server. When you then try to get your mail on your handheld, it’s as though you are trying to begin a second session on the same user id and so the password screen keeps appearing.
If you need to alternate between devices rapidly, make sure you log out properly each time.
Hi
Started program - found SX56. Message "Upgrading - will take about 5 minutes"
on pda. Then it said that it had a problem with the USB or COM connection, and
to fix it in device manager. I opened Device Manager, and checked that all the
USB and COM ports were enabled, which they were.
By this time, the unlock software and ActiveSync had stopped running. The pda
was still stuck on the "Upgrading - will take about 5 minutes" screen. Since
the configuration has changed, ActiveSync will no longer recognize the device,
and will not sync with it. Your software will not connect until ActiveSync does.
All that comes up is the "Upgrading - will take about 5 minutes" screen. there
is no other functionality to the system.Hard or soft resets make no difference.
Active Sync doesn't work. The PDA has changed its configuration, so active
Sync doesn't recognize it. When I plug it in, Active Sync sees something, but
can't even tell that it is a pda, and I can't even set up a new connection with
it. let alone use the old connection.
Can anyone help? is there a way i can reinstall active sync or is there another way to fix it? please help
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing. Unzip the rom after download, start xdatools on your pc, choose the unzipped rom file as source and the drive letter for your sd card as destination from drop down menu, once the card is programmed insert sd card to phone, push reset while holding power, when prompted you then push the action key which is centre of 4 way rocker buttons. Once flashed push the unscrewed stylus into hole next to headphone socket, push once only, wait one minute push once more, this will work as long as you dont have a problematic version of bootloader on your phone. Good luck.
System is entirely backed up onto SD card.Can't use SD card. Can't use PDA.
PDA is still stuck on "ugrading - will take about 5 minutes". It apparently has
no operating system in ROM. No difference with hard or soft reset - comes back
to same screen, no function in PDA.
HELP PLEASE
I think you misunderstood, a normal backup is no good, you need to program an sd card with a new rom, when this is placed in your xda and soft reset it should reprogram your phone with a new rom. You are correct when you say it has no rom, the method I described should restore your phone to a working machine. You do not need a rom to reprogram using bootloader/sd card method, try it and see.
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing.
Click to expand...
Click to collapse
Okay, so can I basically use the newest ROM which also unlock the device too?
You will need to use either xda developers special edition rom to unlock or include the unlock program from the kitchen in a 2002 rom, you can then upgrade to wm2003 if you wish, you cannot unlock under wm2003 so you must use special edition or kitchen rom based on 2002 first.
I am sorry if i keep asking you questions.
I do have the xda special rom, ive tryed using it but it caused the problem i do have right now.
i did download xdatools by jeff. i cannot run them though.
Could you describe step by stef of what i need to do.
i.e. do i need a complete NEW ROM, or can i just transfer the xda special rom to my SD card and then run it to restore my device?
But i guess not, else you wouldnt have explained what i need to do.
Thats the error i get when i try to run xdatools. (I dont understand the install note)
"INSTALLATION
From the source + exe distribution copy OsImageTool.exe and itsutils.dll
to the programme A directory as created by unpacking
jeff's-exe (http://cuba.calyx.nl/~jsummers/XDA/) to a directory in
your "Program Files" directory. Then run 'OsImageTool --register'."
IF you unzip the files you already have both of those files in the folder.
THANKS FOR YOUR HELP
You have to install ActiveSync.
You can get it diretcly from Microsoft for free....
HTH
Stefan
. I was able to locate the NK.nbf file. I ran the XDA OS image tool, to put the OS on the sd card, from the NK file. That apparently succeeded, but it is hard to tell. After loading the OS, when I take out the sd card, then put the sd card back into the sd card reader, it can no longer read the sd card. I can format the sd card again, using my camera, so the sd card is not destroyed.
Wher I put the sd card in the SX56, there is no problem, but there is no success.
Pushing soft reset alone does nothing. Pushing the power button alone does not turn the machine on or off, and does nothing.
Pushing power and soft reset at the same time, gets me the “Wallaby Bootloader V5.15” screen. It first says “wait”, and then says “GSM OK”. It then does nothing else, and doesn’t prompt me to do anything else. If I push the action button, I get “DIAGNOSTICS GPRSA 20324e4”. From there, I can scroll up and down, and test the RAM, Display, battery, USB, etc – all items tested seem OK. There is nowhere to go from here – all it does is test the pieces.
After that, if I push the hard reset (the one that disconnects the battery), the power goes off, and the screen is dark. This is the only way to turn the machine off at the moment. If I push hard reset again, it comes up with a screen full of lines, with two blank holes in it (see attached file). From there, none of the buttons do anything, except hard reset (which turns the machine off again), or soft reset + power, which brings up the bootloader screen again.
have the siemens ROM. It will not work with the cradle, because it cannot find the pda if Activesync can’t make a connection, and loading it onto the SD card does nothing new – both results are exactly the same as with what described above.
any suggestions?
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
This is my first post, so apologies if this is in the wrong place or has been asked before (I have searched and found some answers, but none of these worked)
Basically, last night whenever I tried to use an application on my HTC HD2 I was getting the following error message:
"The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one if its components cannot be found. If the problem persists, try reinstalling or restoring this file."
In searching for the solution, a lot of people are saying that I need to edit the reistry. (Specifiaclly HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1)
I have tried downloading the recommended registry editors on the forums (Resco Explorer etc.) but am unable to install because the "program is from an unknown publisher." I click yes to get pass this initial message, like I always have done in the past, and the following is displayed:
Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate."
I have also tried using a program recommended called CeRegistryEditor and using my PC via ActiveSync to edit the registry, but am getting an error message "Access Denied!".
Does anybody know any other way of editing the registry? Am I actually doing the right thing? Are there any security settings that I need to disable to allow CeReistryEditor to edit the registry?
This is really bugging me, I have only been without my apps for about 12 hours throughout the night but it is hard to live without them!! I REALLY don't want to perform a hard reset and will do anything to avoid this!
When I get this I just remove evertyhing to do with it on the phone and re download it (the cab file usually) and it seems to work.
thanks for your reply. I have tried this but when I try and reinstall I am getting the message: Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate.
I think that the security settings have been changed, but I cant see how to change them with editing the registry which I am struggling to do
Can I ask what app you are trying to install? Or is it any app?
Multiple Apps that were running OK yesterday, but not today. I think it is all the apps that I have downloaded from Omarket.... Omarket isnt working either!
Hi,
Any luck on this. I m also facing similar issue after installing Android on my HD2.
I have the exact same issue after running Android from SD card. No application (non-stock ones) are working anymore. Like 3rd party certificates are being blocked or something...
For everyone with this problem, download Mobile Registry Editor and connect your phone to your PC via USB, then start the Editor and go to "HKEY_LOCAL_MACHINE\Security\Policies\Policies" and search for the DWord "0000101a" and change the decimal to "1", that will fix your problem. This problem happens to me if I "reboot" while in Android instead of turning the phone completely off and then back on.
Edit: Added link to download.
As a side note, I always did this to mine while running Windows Mobile, then booted Android after fixing the registry.
and when this is not possible
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Niine said:
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Click to expand...
Click to collapse
Hi,
I also have the same issue after loading android from the sd-card. I have also re-installed the stock rom and the problem still persists. Im also unable to install any reg editors as keep getting the "not signed with a trusted certificate".
I read that a cooked rom may be a solution around this but I liked the set up I had and wanted to keep my original rom so any other suggestions would be appreciated.
Thanks
Lee
Exactly the same problem.
Non-stock programs not working after failed boot of android from SD card, and I'm unable to change any registry entries either. Practically I'm locked out of my phone, just the basic functions working. Any help would be greatly appreciated!
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
I have the same problem, just remove the program that was not working, pull out your memory card , then delete the files in the sd card except the application installer, hard reset your phone, and remember to go to SETTINGS-UPDATES&FEEDBACK-ERROR REPORTING-DISABLE ERROR REPORTING, and turn off your phone, put in the memory card and turn your phone on and install the application one by one, the application installed will work as normal, Good Luck, remember to back up your data before hard reset
larrytango said:
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
Click to expand...
Click to collapse
i tried this methode but unfortunately this message pops up all time:
"phone is not unlockable"
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.