Hi!
I have tried to install both TOMTOM and the Micheline navition SWs... bot boths are mute!
Other applications using sounds (eg. WMP, Movies etc...) works!
I am using TT 3.07 with:
rom 1.22
radio 1.06
ext rom: 1.22.162 WW
Thanks!
Chris
You need one of these custom mounts:
http://www.pdamods.com/products.asp?cat=23
Cchris, you have installed the voice files for tomtom? Do you get any errors? What happens when you go to volume control in tomtom, do you get any audio there? Have you tried with headset also?
What version of tomtom do you have, is it version 3 ?
Thanks... I solved it
I need to check the "Programs" tick in the "Sounds and Notifications" Sounds Tab...
Sorry for slipping on this banana and thank you for your help!
Related
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
pjam said:
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
Click to expand...
Click to collapse
Tried the same thing, got the same results...
Any help would be appreciated indeed.
some needed drivers are missing somewhere, anyway did you turn off the phone when running the upgrade ie do it in flight mode??
rgs
I always update in flight mode. don't like the idea of receiving a message whilst doing it.
You would think that with the phone working in the rom kitchen original rom and the essentials donor rom that there would have been more than enough working drivers.
: )
try comm manager -> settings -> phone if it asks for your pin..
was missing in some roms i tried...
pjam said:
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
Click to expand...
Click to collapse
there shouldn't be any reason for changing anything with because I used essentials rom and added the touch stuff and some more oems
arent you using 10 buttons comm manager? that is one of the problems, if you make oem package from commonly distributed cab, you should mod its registry to work correctly. it contains many obsolete entries and also some preventing GSM activation.
I was solving this just today
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
be more specific. How it cant run? Install properly? wat else SIP and Today Plugin did u install?
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
possum4 said:
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
Click to expand...
Click to collapse
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
I have English Rom version O2 Xda Atom Pure! Calligrapher worked before on 0.3.0 and original roms. Just this rom won't work on!
try to install G4 SIP Tweak.cab make pcm keyboad as default SIP, it works for me....
download from here... http://forum.xda-developers.com/showpost.php?p=1424544&postcount=1
ogami_ito said:
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
Click to expand...
Click to collapse
Hi and thanks for your help and suggestions. I tried the software you suggested but it didn't work (with calligrapher). Thanks again anyway
possum4 said:
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
Click to expand...
Click to collapse
May I know what the version of this Calligrapher is? and where is the official site?
www.phatware.com I'm using current version 8.5
thanks!
possum4 said:
www.phatware.com I'm using current version 8.5
thanks!
Click to expand...
Click to collapse
if this program works..can u share to me this program and PM to me the Se**al..thanks
Jiggs I know you are busy however I'd just see if there could be any work arounds so I can run Calligrapher. I have tried the suggested "sip change" programs mentioned and also tried sk tools etc. Only if you have time of course! I'd be very grateful. Thanks again for your wonderful work
I have just tested the latest version of caligrapher on my new build. It works perfectly
Caligrapher is cool, but the application is large
I agree with Jiggs. Nice software though.
Could I help test the new build? Or is that too much to ask?
Calligrapher v8.5 works fine for me w/6M pagepool.
Calligrapher uses a LOT of memory. It seems to fail to run when you have too many today plugins (or a few using lots of memory). Here are the things to try:
1. Go to options and set Calligrapher to be the default SIP on reset.
2. Reset the device.
If it still doesn't work:
3. Disable ALL of your today plugins.
4. Reset the device.
If it works now, decide which today plugins you can't live without and turn them on one by one until Calligrapher stops working.
If it did not work, try SIPChange - http://forum.xda-developers.com/showthread.php?t=271008.
Good luck!
All,
Normally I install VC as the first application on a new build / hard reset to avoid any issues. At present, I just finished installing a ton of other applications and then realized that forgot to install VC first and now it is refusing to activate after an error free installation. e.g. it isn't working...
Any thoughts on how to fix VC or force it to work?
I have toggled enable/disable, but no joy... (all that I am gettting is a busy pin wheel for a few seconds and then nothing at all, even after several resets...)
Any thoughts?
bob_beringer said:
All,
Normally I install VC as the first application on a new build / hard reset to avoid any issues. At present, I just finished installing a ton of other applications and then realized that forgot to install VC first and now it is refusing to activate after an error free installation. e.g. it isn't working...
Any thoughts on how to fix VC or force it to work?
I have toggled enable/disable, but no joy... (all that I am gettting is a busy pin wheel for a few seconds and then nothing at all, even after several resets...)
Any thoughts?
Click to expand...
Click to collapse
Have you tried the Fix originally designed for AP2 but also working on AP 3 ?
Maybe this will help here as well....
Sorry but I can't include any attachments....search for: PK 1[1].0 Touch Fixes(fixed).cab
Dieter
fyi:
I installed PK 4.0 today and immediatelly afterwards VC 1.6. Works fine without the patch mentioned above!
Dieter
just use the cab with MVC in the file name. this cab is found in the addons rar easter egg
Pawel062 said:
just use the cab with MVC in the file name. this cab is found in the addons rar easter egg
Click to expand...
Click to collapse
What does it help ? Mine is running without this cab. Will VC 1.6 run better ?
Dieter
Thanks guys
In my past experience, if VC isn't installed right after a fresh load it is unhappy with being installed at a later time. I think that the fix is only for folks like me that forgot to place that application higher up on the installation list during this time around...
Thanks again,
Bob
Hi all
i have a big problem with my prophet. Every time if i want to hear a song with HTC Audio Manager,Coreplayer or Windows Media player after a while every player quickly ends. And after that i cannot play any sound which is saved on the sd-card. I dont know why. The programms are shutting down everytime. Another thing is if i want to start an alarm with SPB Time (sound is selected from sd-card) the programm starts and ends with no alarm... Do you think the SD card is crashed? Or is anything wrong with my rom or the hardware of the phone?
thx
What ROM are you using? Have you experienced this problem with any other ROM?
yes one time - but not with all roms
i´m using a german one - Prophet S4V.19701.01 (UC) GER MyEdition v.2 (Full) - RC1
maybe i should flash an other rom?
That's odd... I'd suggest trying another ROM (maybe a WM5 ROM...) just to see if it's the hardware or the ROM.
DONE!
After new flashing and formatting the sd card (fat32) everything is doing well^^
thx
Hi friends.
I have experienced a problem with connecting my phone to the car by Bluetooth, it connects but just audio streaming, no phone functions. So, it happens in any ROM after 16s, custom or Stock ROM, is the same.
In the previous versions, it works completelly and full and nice, but when I use a ROM with a newer version, the BT doesn't work properly with my car.
I have tried OTA with the stock Chinese ROM, from the 15s (working great) to the 20s(doesn't work).
Any developer here, know which changes in BT files from that version to the latest ones? or if there is a way to flash something from the 16s, that stuff is my only problem.
Thanks for your help!!
Same problem... someone found a solution?
Thank you.
It seems we are the only one...
icerebro said:
Hi friends.
I have experienced a problem with connecting my phone to the car by Bluetooth, it connects but just audio streaming, no phone functions. So, it happens in any ROM after 16s, custom or Stock ROM, is the same.
In the previous versions, it works completelly and full and nice, but when I use a ROM with a newer version, the BT doesn't work properly with my car.
I have tried OTA with the stock Chinese ROM, from the 15s (working great) to the 20s(doesn't work).
Any developer here, know which changes in BT files from that version to the latest ones? or if there is a way to flash something from the 16s, that stuff is my only problem.
Thanks for your help!!
Click to expand...
Click to collapse
Copy the "/system/lib/hw/bluetooth.default.so" file
from 15S rom to your current rom, and set permissions for 0644 -rw--r--r than do a reboot, and its work
Regards!
@iaureeel
Are you sure men?
Isn't there any risk for doing that?
help
I have this problem, have the Bluetooth version and I can't make calls or answer calls from the gear s3. All other functions are good. I'm using Leeco Max 2 and the os EUI 6.0 20S. Please help.
icerebro said:
@iaureeel
Are you sure men?
Isn't there any risk for doing that?
Click to expand...
Click to collapse
Yes. Do a backup and try it. For me its worked.
I can connect my car audio now
Here is a picture how you set the permissions. Use for this "Root Browser" from Play Store. Navigate to /system/lib/hw and copy here the 'bluetooth.default.so' file, overwrite it, and long tap the file -> Permissions -> [set like in the attached picture show ] -> ok. Now reboot your phone, and its work.
Regards!
@iaureeel
You are a Master men!!
I did that and worked so so so great!! In the first try!!
Many months finding a solution and it is the one!!
Thank you so much!!!!
iaureeel said:
Yes. Do a backup and try it. For me its worked.
I can connect my car audio now
Here is a picture how you set the permissions. Use for this "Root Browser" from Play Store. Navigate to /system/lib/hw and copy here the 'bluetooth.default.so' file, overwrite it, and long tap the file -> Permissions -> [set like in the attached picture show ] -> ok. Now reboot your phone, and its work.
Regards!
Click to expand...
Click to collapse
But this solution can to resolve my problem of connection bluetooh? I can not call them to receive calls from a samsung s3 gear, all other functions are perfect.
Try with an old version of EUI, maybe 15s or 16s, if it works normally with you device, so you can apply this solution.
icerebro said:
Try with an old version of EUI, maybe 15s or 16s, if it works normally with you device, so you can apply this solution.
Click to expand...
Click to collapse
Can you share the file of bluetooh for the version 15s? So I will make it.
@ciopyn
Sure men.
This is the link, in GDrive.
https://drive.google.com/file/d/0B6tu1k0eUx7rS3l3ZXdXWS1MUUE/view?usp=drivesdk
Regards!
icerebro said:
@ciopyn
Sure men.
This is the link, in GDrive.
https://drive.google.com/file/d/0B6tu1k0eUx7rS3l3ZXdXWS1MUUE/view?usp=drivesdk
Regards!
Click to expand...
Click to collapse
Thanks, you are great and great Iaureeel, now with the file on 15 s all function are good, this is the solution for the calls on the gear s3.:victory::victory::victory::victory:
ciopyn said:
Thanks, you are great and great Iaureeel, now with the file on 15 s all function are good, this is the solution for the calls on the gear s3.:victory::victory::victory::victory:
Click to expand...
Click to collapse
Good to know it worked for you!
@iaureeel
I triet to do the same with AoKp 7.1 but doesn't work. The BT ataya disabled, no way to activate it.
Do you know what can it be?
Same here. I can't make calls or seeing my contacts. Using the nougat Resurrection Remix. Everything is working fine except Bluetooth. That's annoying.
Tried the workaround but then Bluetooth isn't working anymore.
Please help us to use the phone in the car.
Thanks.
iaureeel said:
Yes. Do a backup and try it. For me its worked.
I can connect my car audio now
Here is a picture how you set the permissions. Use for this "Root Browser" from Play Store. Navigate to /system/lib/hw and copy here the 'bluetooth.default.so' file, overwrite it, and long tap the file -> Permissions -> [set like in the attached picture show ] -> ok. Now reboot your phone, and its work.
Regards!
Click to expand...
Click to collapse
Do we need to root our phone for this... coz in my case its saying operation failed..
Bluetooth car audio is not working for me too on Lineage 14.1 BlackX Revolution. I tried the bluetooth.default.so from here but then I cannot activate bluetooth at all. Did anybody here find a solution for that?
Or which ROM do you use for working car audio hands-free calls?
icerebro said:
@ciopyn
Sure men.
This is the link, in GDrive.
https://drive.google.com/file/d/0B6tu1k0eUx7rS3l3ZXdXWS1MUUE/view?usp=drivesdk
Regards!
Click to expand...
Click to collapse
Hi icerebro,
The link seems broken now. Could you please share the file again. That will be very helpfull! Thanks in advance!