O2 mini IE unable to load message though it connected - MDA, XDA, 1010 General

My O2 mini with Windows Mobile 2003 second edition failed to load message. I could see it connected the web and able to locate the URL. But the message is unable to display. Could someone help? I know i might able to fix it by a full reset but i don't want to do it. Any idea the cause of the problem.

Related

No USB sync ;(

Suddenly, by USB sync is gone. I can BT ActiveSync and serial, but no USB. I am sure it's something in software, because after hardreset it recognized via USB again.
Any ideas?
TIA
little help
:idea: I had the same problem twoweeks ago ,and I realized that from some strange reason one small application repllog.exe (located in windows directory) is not activated anymore. This aplication activates USB communication, and when you run this manually -active-sync will work. However I dont know how to fix this problem to run it automaticcaly, but -i don´t want it eather, because of I´m using connectionto internet through GPRS of my XDA2 (WModem+HTC USB modem driver+USB modem dialer) and automatic sync via ActiveSync makes collision in communication (blocking USB port)......
From M$ site:
PRB: ActiveSync May Stop Responding or May Not Connect After Many Soft Resets
SYMPTOMS
If you soft reset Microsoft Windows Mobile 2003 for a Pocket PC device or for a Pocket PC Phone Edition many times, the device may stop responding when you synchronize with Microsoft ActiveSync through a serial cable or a USB cable. Infrared transfer speeds are not affected.
RESOLUTION
Hard reset your Pocket PC device. For more information about how to perform a hard reset, see your device documentation.
MORE INFORMATION
Restoring an ActiveSync backup may not resolve this problem if the backup was made when the problem existed.
To reproduce the problem, perform a soft reset several hundred times.
I've root it down this problem to notifications queue. Memmaid apprently killed repllog.exe, as mcmills correctly pointed out.
I also recently encountered this problem. I cannot, however, find repllog.exe.
I even usedthe search function but the file is just not there. I am an
experienced user and I do not remember deleting anything.
By the way, I'm using Windows 2000 SP2.
repllog.exe
For>ahro
this file is not in PC, but in XDAII, so you need to look there: XDAII_root\Windows\repllog.exe ....

Java Exception Errors

Hi,
Don't know if anyone can help with this? I've tried a couple of FTP clients on my Hero using BeHero's v1.2.5. I can connect to my FTP server over wifi but whenever I try to connect over 3G I get a Failed to Open socket. java.net.UnknownHostException error.
As this has happened with two separate apps I assume it's something to do with a setting on the phone rather than the apps.
Any help appreciated.
Ta
M

[Q] I've searched and searched with no success re Windows Mobile Device Center

As you can see, I'm a Senior Member; however, I've been "away" for a few months. I had an HD2, which was stolen. After reverting back to an old Nokia to get me through the "tough times," I bought a Telus HTC Desire (running Android 2.1) and had it unlocked.
This was my first time using Android. It's a nice operating system, but I simply cannot do many things I used to be able to do with my HD2. So, two weeks later I bought a new HD2. I still have the Desire if anyone's interested. It's in perfect condition, but that's not my reason for writing these words.
I've searched and searched and searched the forums with no avail. It has to do with Windows Mobile Device Center and error messages when I try to sync my HD2 with my PC.
Okay, I'll try to provide as much detail as possible.
First, I DO NOT USE EXCHANGE. I have only one email address set up using POP, and it works. I can get and send mail without a problem.
However, everytime I attach the HD2 to my PC via USB cable, Windows Mobile Device Center automatically starts the sync process. Sadly, though, I ALWAYS get the following error message: Exchange Activesync encountered an error ... blah, blah, blah, and nothing syncs.
Then, if I leave my HD2 connected, when the next automatic sync begins, there's no problem (most of the time). My Calendar and Contacts sync well.
I ONLY sync my Calendar and Contacts. Nothing else!
I've tried virtually every solution I've found on the Internet without success. I've tried syncing just one of the two items, either just the calendar or just the contacts, and then go back to both, but that does nothing to solve the problem.
I'm simply losing my mind with frustration. I cannot get that "darn" error message to stop. I simply want my device to sync with my PC (running Windows 7 64-bit). Yes, I'm using Windows Mobile Device Centre 6.1 for 64-bit systems. Yes, I've tried uninstalling it and re-installing it ... but still no success.
I've tried remove the partnerships and starting over again, but the same error message occurs.
HELP, HELP, HELP!
I've been a member here for quite a long time and have found this site to be the "cream de la cream" of sites for HTC phones. I'm hoping someone can help.
Thank you,
Peter
Anybody?
Hmm, it's been several days with a reply to my original post below. Has no one else had this problem?
Can anyone help?
Thanks,
Peter
only advice would be performing a hard reset if you havent done it yet.
maybe it can help...
DN41
Already did a hard reset ...
I already tried a hard reset, but I still have the error issue.
Hmm.
Have you tried:
Try running the command below in a Command Prompt with admin privileges:
regsvr32.exe %Windir%\system32.exe\ole32.dll
Press Enter.
Reboot your computer.
fred_up said:
Have you tried:
Try running the command below in a Command Prompt with admin privileges:
regsvr32.exe %Windir%\system32.exe\ole32.dll
Press Enter.
Reboot your computer.
Click to expand...
Click to collapse
In response to your question, I ran your suggested command in a Command Prompt, but without success. I kept getting the following error message”
The module “C:\Windows\system32.exe\ole32.dll” failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found.
On a related note, pardon my ignorance, but what does it actually mean when someone says "with admin privileges?" I bought my laptop, I own it, no one else uses it, I have not set up anything special concerning more than one user since I have been and always will be the sole user of my laptop, so can I automatically assume I have admin privileges? If not, how can I change this, and why would I not have admin privileges? How can I confirm if I do or don't have admin privileges?
Thanks,
Peter

[Q] Error Connecting Tab(Open Kang 31 ROM) to PC(Ubuntu)

Hi,
i tried to connect the Tab(Open Kang 31 Rom) to a pc with Ubuntu 12.04 and i had a strange issue( i read all the posts so i selected in Setting/Storage MTP ). The pc is not able to open the Tablet Storage and this is the error msg:
"Sorry, could not display all the contents of "GT-P7510": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I tried to connect the tablet to a Windows plattaform and everything works fine.
Any ideas?
Thank you
Two issue :
the first which can be hard
1) look here : h**t://kobablog.wordpress.com/2011/05/25/connecting-samsung-galaxy-tab-10-1-via-adb-on-ubuntu/
the second which is easy :
You can simply acces to your tab wireless with app like WIFI File Transfer
Just like Brahim93 suggested, you can use adb, it will give you more than access to the internal storage, it will be helpful for debugging, testing and other related things.
But if you only want to access the files like in Windows, mount your tab with something like mtpfs.
Other option (if you have the proper network configuration) is using a FTP server in your tablet, like SwiFTP FTP Server.
Thank you both of you...i will try what you suggested.
Sent from my GT-P7510 using xda premium

Problem with network file sharing

Hello, today i tried to setup remote shares that you can find under storage in settings i read tutorial on this website http://unsolicitedbutoffered.blogspot.com/2015/01/unsolicited-question-can-sony-xperia.html
So first of all, my remote shares setup menu is different (see screenshots and if possible upload screenshots of your menu so i can see if its maybe because i run android 4.3)
and when i click add host it dosent ask me if i want to setup windows or sftp, it just opens menu where i have to enter host info (this how it should ask me windows or sftp https://sasapetrovicblog.files.wordpress.com/2014/11/39.jpg?w=168&h=300 but it never asks me)
I tired to setup using both windows and freesshd software but both failed so i need help with two things:
1 can someone explain me how to make remote share on windows and then set it up to work with my Z Ultra
2 can someone help me to setup freesshd to work with my phone, i created user in software and entered all info in my phone but it always gives "could not connect to 192.168.1.2 please make sure that you have entered correct information for this host", i was able to connect to mini sftp server (http://www.coreftp.com/server/) but i want to use freesshd
Here are my screenshots because XDA developers forum is changing size of my screenshots https://drive.google.com/folderview...RIWUYwTlRVNHh6OWFTb3VFN2VRY2Q3cE0&usp=sharing
please help, im trying to make it work for about 3 or 4 hours already and it wont work, im so frustrated now and im about to throw everything trough the windows, please help.
Sorry for my bad English.

Categories

Resources