:twisted: :twisted:
Hello I Have Just Upgrade 2 WM 2003SE & Since I Have Upgraded My Fone Seems 2 Hard Reset On Its Own For No Particular Reason, I will Just Exit A Program And Then All Of A Sudden It Will Hard Reset Its Self!
Is There Anything I Can Do 2 fix this problem?
upgrading your XDA II
By the looks of your radio version (1.08), You may need to upgrade your bootloader version.
For OS version 1.66 you really need to have bootloader version 1.06
If your own is 1.01 or 1.03 it will be unstable.
To find out your boot loader you need to press the standby button, the action key, and the reset button together. This will put you into bootloader mode.
The latest stable bootloader is 1.06.
The latest rom software version is 1.72.
The latest radio software is 1.17.
So you need to find this bootloader or reflash you unit back to your previous OS version :lol:
You could also try and upgrade you radio version to 1.16 to match your OS Version (1.66). but you do need to get that bootloader upgraded.
Me Confused,
:shock: :shock: :shock:
I'm confused 4 i have upgraded 2
Windows CE 2003se
Rom Version 2.06.00WWE
Radio Version 1.18.00
Protocol Version 1337.38
ExtROM Version 1.12.925 WWE
from this site!
Why you say the latest ver is,
The latest bootloader is 1.06.
The latest rom software version is 1.72.
The latest radio software is 1.17?
Why Go Backward In Ver or is wat i got just crap?
is the 1 you say more stable over all? if so would you no where i can get my hands on asia install for my fone?
or can i fix wat i got now?
also if you no how could i make an SD Card To Boot/Load My XDA 2 (asia)? I'm keen on learning How 2 DO that 2
:twisted: :twisted: :twisted:
Thanks 4 Da Reply,
I have the same problem but my loader version is the 1.01 i think is the radio version 1.18 now i'm back to 1.14 if it will not hard reset newly i say to u
I can confirm than this solution works for me, by now noone hard rset are coming, i installed this SE rom
http://forum.xda-developers.com/viewtopic.php?t=16880&start=0
but with the 1.14 Radio version, the original from 1.72 ITA distribution.
i hope than this can help you
Luca
Thanks, I'll Give Dat A Whirl!!!
Related
I am already reg. with I-mate as owner of one of it products, I got informations from them say that new room will be avilable soon it is ver. 1.66 for XDA II maybe next few days, and the windows Ver. is Windows 2003 SE
at all when I got the link to download it I will publish the link for everyone, Thank you for everyone published that great support using XDA II and XDA. it was great help to me to came very expert in solving problems to my XDA and XDAII
as my profile say then
i have
RUU 1.66.00WWE
RSU 1.10
on my qtek2020 it came with that
as far as i can tell it's not 2003 SE
specs
ROM version: 1.66.00WWE
ROM date> 02/20/04
Radio version 1.10.00
protocol version 1337.18
extOM version 1.66.140
I published what I already read in I-mate forum, I didn't have it yet ...... by the way all new edditions of XDAII coming with v. 1.66
so Rudegar
as it is getting really stressy to have the latest release... ;-)
do you have any ideas about the improvements with your
1.66.00 ROM over the 1.60.00
Alex
hmm, can you post a copy of your rom?
you can copy the rom with pmemdump from itsutils.
well it had that rom when i got it so i cant really compare it with 1.60 since i went from a xda1
i'll look into drumping the rom
but it does seem to have some auto settings and such for
some phone company
usually the phone company specific stuff is in the extended rom.
itsme:
usually the build number is just the ExtROM right? example, the latest tmobile rom i saw in the other thread had 1.60.36, but the os was simply 1.60.00, and the radio was 1.10.00, and the extrom was 1.60.36
does that mean that IF we extract whatever newest rom that comes out in the future and see that it has the same osrom ver and radio stack, merely upgrading the ExtROM is the best way to go?
I mean i know people prefer to only flash the ExtROM, but that's because they want to cook something up. But what if you just want to upgrade and not waste time with the OS if you see they still have the same number, does it HAVE to come hand in hand to upgrade? Or could you just bypass the others and upgrade the ExtROM and expect it to perform like a real update?
yes, that is what I usually do.
Hi guys
I want to make my O2 XDAII as sweet as possible, currently i have
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.10.00
Protocol Version: 1337.18 (ok who in O2 is a h4x0r? lol)
ExtROM version: 1.60.50
Whats the best ROM to use and what are the benefits?
DT
dumbterminal said:
Hi guys
I want to make my O2 XDAII as sweet as possible, currently i have
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.10.00
Protocol Version: 1337.18 (ok who in O2 is a h4x0r? lol)
ExtROM version: 1.60.50
Whats the best ROM to use and what are the benefits?
DT
Click to expand...
Click to collapse
how about adding some honey n sugar to ur xda2?it will definately b sweet...
the benefits are that it will b sweet like wat u wanted n will attract ants also...
which ROM is best for XDA2
before you do anything to upgrade your XDA2, you need to think anout your satisfaction with your XDA2 now.
If your device work well, you won't need to do anything.
because of ROM upgrade is risky your device please think before do anything.
In my suggestion, the best ROM is T-mobile 1.72. you can search in this forum to find topic about T-mobile 1.72.
think before do anything.
What about if you use 1.66.00 WWE and the damn thing crashes all the time? any reccommendations? A few people have been raving about the imate 1.72
My IMate 1.72 ROM is running okay. A few little problems, but nothing that a soft reset didn't cure.
I'm on the T-Mobile ROM...
ROM version: 1.60.00WWE
Radio version: 1.10.00
... with a customized ExtRom.
i-mate ROM 1.72 doesn't work with my GPS Software (Intellinav - Belkin Navigation System)... and it also has bad Cleartype. I-mate ROM 1.66 also has the Cleartype problem, and one of the cleartype fixes some one posted here gave me a hard reset. I-mate ROM 1.52 doesn't have the integrated applications as services advantage so there are less processes available on that ROM, which means you won't be able to run as many applications at once.
Personally, I think I'm going to stick to ROM 1.60 until some Second Edition ROMs start showing up.
Anyone got a 1.60 ROM that I can get? I found that much better than the 1.72 that I upgraded to, but I deleted it..
im on imate 1.72 never had a sd erase nor hard reset have to softreset every few days thats all works great with tomtom3 and BT gps
gaz
I have just upgrade my Imate from 1.55.00WWE up to 1.72.00.WWW but radio version is only 1.14. (official ROM of Imate)
So I want to ask that should I upgrade my radio version to 1.17?
If need, can you give me a Radio.exe not radio.nbf?
IF Radio.nbf, how can I upgrade it without hard reset?
Many thanks .
Try It :
Don't know, What is improvement & benefit... :?:
Radio Stack is Mystery.... :roll:
_____
Credit : feythinku
www.o2jakarta.toemo.org
Anybody tried this yet?
question is
why did the guini pig cross the road
hmm i mean which guini pig will sign up for the road crossing
event
Noob question alert:
What is bluethoot radio for?
are you asking what the radio stack is for or what bluetooth radio stack is for ?
if the former then it's the embedded software which make the gsm phone part of the himalaya device run
if the later it's the software which control the bluetooth wireless comm which is used for activesync and headsets and gps and such
ty Rudegar, so it has nothing to do with streaming radio right?
I install this radio version...
It works fine... i canĀ“t see any diference
sorry by my question guys.
is still ROM 2.20.07CHS the only ROM available for xdaII which supports hands free profile working well :?: :roll:
Dear All
from my experience this rom is good not taking so mutch juce from the battery but have only one big problem is the fly mode
the radio can not be on if you switched off ( i am tolking on the w5)
Sacaman :wink:
rom 1.19
How do i upgrade my radio version 1.17 to 1.19...
I have download radio_.nbf but how wil my device recognise this?? :?
thanks alot this first time to me , I have download radio version 1.19
however i need help in how to upgrade my jasjar device
thanks for help and support
Do you have the lasted radio ROM for XDA II?
_____________________________________________________
XDA II Windows Mobile 5
ROM Version 3.50pp16
ROM Date 02/12/07
Radio Vesion 1.18.00
Protocal version 1337.38
ExtROM Version none
_____________________________________________________
Help
i have :
PDA2 Windows M 2003 SE
ROM version 1.11.00 WWE
ROM date 01/27/05
Radio version 1.03.00
EstROM version 1.11.153 WWE
plese help me to know what is the pest rom version to work with & what is the best radio verion
& for known that my device turn off when the power come between 30 - 40 %
Big thanks
Sam J
I have updatet from 1.17 to 1.19.
THX
Greaat!!
ajong said:
Try It :
Don't know, What is improvement & benefit... :?:
Radio Stack is Mystery.... :roll:
_____
Credit : feythinku
www.o2jakarta.toemo.org
Click to expand...
Click to collapse
Thank you....
I have download radio version 1.19, It works fine... nice job.
Hi,
edjuh said:
How do i upgrade my radio version 1.17 to 1.19...
I have download radio_.nbf but how wil my device recognise this?? :?
Click to expand...
Click to collapse
you have to perfom a real ROM update with HimaUpgrade Tool which can be found in the different here avaiable Roms. Just delete nb.nbf and ms.nbf (which are System and extRom), copy your new Radio-Rom to the Upgradefolder and start Upgrade; this way only the Radio Rom is being updated.
For safety reasons first watch the instructions for making a Backup and how to make ROM Update !
So long
HonkBB
..
Hi,
btw. I tried 1.19 too ... got the mentioned problem with FlightMode .. once activated no chance to deactivate, that means no phone .. so I downgraded to 1.17 ..
So long
honkBB
Is anybody know which is the newest radio for himalaya?
HonkBB said:
Hi,
btw. I tried 1.19 too ... got the mentioned problem with FlightMode .. once activated no chance to deactivate, that means no phone .. so I downgraded to 1.17 ..
So long
honkBB
Click to expand...
Click to collapse
Hi
1.19.00 FlightMode, nce activated no chance to deactivate, TRUE
Where can I download 1.18.00 or 1.17.00 RADIO ROM ??
Thank you
hay friends it's not working fine as well as call comes with disturbance.
& flight mode ( airplane mode ) also not working u have to reset.
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!