When the instalation is complete and my qtek 2020 is run for the first time with new OS packages start to install themselves and each of them shows the same error.
Example:
"The file "\Windows\ExtROM.exe" is not a valid Windows CE Setup file."
What to do?
sin problems
I had the exact problem after I installed it on a t1000 .I found that it eventually worked after I deselected some items when asked which I wanted to restore,Can't remember which I selected but after a few tries it eventually got by the error message and compleated the load .Works perfect now.
HW.
After doing a hard reset you will be presented with a SpriteBackup window. You MUST click the "Restore..." button to unpack the rom image into main ram. When this is complete the normal installation process will then start.
Related
"The application failed to initialize properly (0xc0000135). Click on OK to terminate the application"?
Have tried d/l it a couple of times, d/l to a different location on the pc, but no go? Has anyone else had this problem, or knows how to fix, pls?
Cheers,
RMB.
Edit: Upgrading imate JasJam to WM Satin (or trying to!).
Wow, I am getting the same thing!
I've been using cooked roms from people on this site (Schaps 3.54 or Jasjamming's Black (numerous varients)). Decided to upgrade today and no matter which Rom I try, I get this same message each time
I've tried re-installing ActiveSync 4.5 too, but no joy
Can anyone help us, pretty please?!
install the microsoft .net framework. i had the same problem until i realized i did not have the .net framework installed. you can pick it up from the windows update site. - REDLINE
Already installed it this morning (and rebooted pc since then). Thanks for your input, though. Will trying re-installing it and trying again... RMB.
Edit: Actually only d/l it/...
whoops lol
hope it worked after you installed.
Hi everyone,
Installing .NET Framework (I did up to v3 as this is the latest from MS Update) worked a treat.
I realised I had rebuilt my laptop since the last time I upgraded my phone so didn't have it installed (as a Java developer.... well, you know the rest )
Thanks 10kredline for your help on this!
Just for fun - Favourite ROM (all good I know, but we all have favourites!)
Helloo... sory if i'm asking this question.. but me having a problem with the microsoftframework.net.... i already instal it with v3.5... but still have a problem which it said "cannot load ROMUpgradeUt.exe"
My device shown the three colour when reboot (everything were ok) but after the device shown the percentage of the progress, suddenly it say completed... then i click finish button, it shown microsoft.net problem...
Pls help me..
Hi,
This is my problem, I have a X7501 running Windows Mobile 6.5 Cooked by MichyPrima. The current Rom I have is this; "Athena_SPL1.2_R1_CE_B21500_MiChY"
The problem with this version is that every time I do a soft reset, all or more of the programs that I installed get deleted and I have to reinstalled them again.
So, I decided to upgrade my pda to this version
"Athena_SPL3.5_R1_CE_B21500_MiChY"
In order to this I just simple need to flash the above file in my x7501 and here is when the problem starts,
I run the "RaphaelCustomRUU" that comes with the rom, I follow all the prompts and when the instalation start (0%) the pda auto-restart, the connection get lost and the installer simple stops.
I tried to install another version "28205_1_04RVGA" but happens exactly the same, I tried to update my Radio, and the same.
It looks like something is making my Pda to restart and doesn't allow the installation to continue. I also follow the steps from 1 to 10 of this file "AP4_How_To_1.8" to try to fix any problems with my device and nothing.
Battery is 100%
antivirus is off
PDA Sync perfectly
PDA works properly except when soft reset
Does any one has any idea why the auto restart is happening???
Thanks in advance
sovius
Hi I also have a similar problem:
I was running SPL3.5 & AP4 on an Athena X7500 previously but making a hash of the new/old roms to install, i flashed AP Touch by PK.
I am now unable to get into windows mobile's Today screen as the customisation process which runs config & AP Touch.tsk keeps resetting the device. Each attempt i flash (i tried multiple ROMs, ranging from AP Touch again, AP3newSPL, and AP4.0 again) results in an error asking me to check my USB connection to the device. I suspect its because i do not have enablerapi anymore inside the device. I am unable to install enablerapi into the device since it keeps resetting! deleting files from the startup folder to try stopping the customisation / reset process also didn't quite work, neither does it allow me to delete the AP Touch.tsk file inside the device.
Can anyone help??
Well, after a lot of research and luck I have finally resolved my problem.
and here is how I did it.
As you know my device every time I try to flash it from the computer, didn't response and simple cut the connection. I tried to flash it from the SD card and nothing, so.
1) look for the rom you want to flash, in my case was "Athena_SPL3.5_R1_CE_B21500_MiChY". Note; you can go from SPL 1.2 to 3.5 but for some reason I couldn't go from 3.5 to 1.2 or earliest.
2) I put my Athena in bootloader mode, by pressing camera + Comm Manager + reset
3) the colored screen appears saying on the white area (serial). why, I'm assuming my device was waiting for a serial connection or something
4) and here is the luck, I connect my USB cable to my device and the word serial changed to USB.
5) I activated the RaphaelCustomRUU.exe with the "Athena_SPL3.5_R1_CE_B21500_MiChY" rom inside and follow the prompts
6) the installation for the first time in more than 6 months finally start and satisfactorily was completed as well.
done
I'm checking if everything is okay, but so far, everything cool,
Hope this is helpful to those who face the same problem.
cheers
Sovius
Hi ,sorry noone saw your post but it would have been obvious what your problem was.
There is a way to downgrade to SPL 1.2 and it is in the stickies.
Just for reference if anyone finds this thread, you should have gone into bootloader to check your SPL and then made sure your ROM matched this.
The mismatch was the problem that caused the endless reboot.
regards lakeman
Thanks for your replay.
but I'd like to mention, that I was not trying to downgrade my SPL, in fact I was trying to Upgrade from 1.2 to 3.5. But that is not the issue.
My problem was that no matter what installer I used, after follow all prompts, the installation process freezed at 0%. Everytime I connected my PDA, everything looks alright until the installation process started and nothing always 0%.
So the solution was to put my PDA in bootload mode and only when the coloured screen appears, only at this point I connect my USB and double click the RaphaelCustomRUU.exe with the desired OS. My PDA instantly recognized the connection and did the installation.
Cheers
Hello has some days that I begin to use the fantastic romTool, but now suddenly one of my forgetfulness into a large OEM, OsBuild.exe I stopped, and now every time I arrived at the stage of recovery romTool open OsBuild.exe me check OsBuld the error has stopped working. What can I do? Use With Windows 7
RomTool
can you post some details of the error?
that is probably due to the nb0 being packed with LZX compression.
I read on how to install android on hd2,
followed the steps(SD Rom),
first i installed android boot loader 6.0,
And through that i set up the settings,
It showed my the android HTC screen,
and then just suddenly went back to windows, and now
the android boot loader wont uninstall or reinstall,
The android opening file says :The file cannot be opened and that it is not signed with a trusted certificate, or one of its components cannot be found.
Can some one help? :S
amigo max said:
I read on how to install android on hd2,
followed the steps(SD Rom),
first i installed android boot loader 6.0,
And through that i set up the settings,
It showed my the android HTC screen,
and then just suddenly went back to windows, and now
the android boot loader wont uninstall or reinstall,
The android opening file says :The file cannot be opened and that it is not signed with a trusted certificate, or one of its components cannot be found.
Can some one help? :S
Click to expand...
Click to collapse
Incorrect forum, but try upgrading to the latest ROM 3.14 (this will delete all of your data, but who cares, it's Windows ) which will have the latest radio and also this will completely delete the applications (I had this error with uninstalling the bootloader as well). Try this first and report back if it doesn't work.
Also, in future please post in the Q&A and general forum if you are not developing, this is the development forum.
Really sorry for posting in the wrong place,
I have got my problem fixed, it was actually the build which i had that created this problem, i factory reset-ed my phone and used another build, now everything is fine.
Hi all, first of all apologies for my English ...
I have single micro sim MTK6575 I9300 800x600 Android version 4.1.19.
I tried to make do with the problem of synchronization gmail contacts and it tried to install gapps-ics-20120429-signed.zip via CWM and I returned "Error: Invalid OTA package. Missing scatter ..." probe with other versions of gapps error and gave me Signature error ...
So much reading I found behind a guy who sent the files in System had to be replaced and how many people appreciated, so I follow his advice and I copied those files ... I went to restart the message "unfortunately the process com.android.phone has stopped" very often and the phone was very unstable ... but yes, Android show me the possibility of synchronization my contacts ...
On another forum I read that this was enough to get right to make a "wipe cache partition" from recovery mode ... so in my ignorance, I did ....
The result is that the message "unfortunately the process com.android.phone has stopped" appears continuously, to the point that I can not even finish the setup tutorial... now I have a mobile where I can't do anything...but it's fine.
I have a ROM, but I SP_Flash_Tool_v3.1224.01 doesn't recognize the phone (I can not access USB debugging Setting up for your Android device) in my PC the driver is installed beacause yesterday I tried.
- I have a rom not recognize the Recovery mode to put it from "apply update from sdcard2"
Nor do I have a cwm with gapps that the recovery mode accepts.
I do not know if I'm missing something ... but the truth is that after so much error I'm pretty sure I'll brick my phone in my next try..
I would appreciate thoughts .. for sure in my ignorance I'm having an simple option ... I have the opcion of spend two days more reading about to make the convert Stock ROM flashable ZIP
Thanks in advance
Finally I get a ROM and back to 4.1.19 no syncronize contact but no crash with continuos "unfortunately the process com.android.phone has stopped" errors
If somebody know how to fix not sincronize I apretiate too much
For SP flash tool you need the correct drivers and here is the site to install the ADB drivers or you can search over the Internet its easy to find......
Can you get to the settings? Then go there and wipe the data and cache of phone and contacts under application settings
maybe you can get out of this mess:good: