DOWNGRADE ROM FAILED..HELPPPPP - MDA II, XDA II, 2060 ROM Development

Pals ,
I read alot of postings about dead XDAII , and i tried every actions they suggested but doesnt work on mine..... now my XDAII still blanked
with screen written
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ? by the way , i downgrade from ROM 1.66 to 1.60.00WWE
thanks
steven

sbudiarta said:
Pals ,
I read alot of postings about dead XDAII , and i tried every actions they suggested but doesnt work on mine..... now my XDAII still blanked
with screen written
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ? by the way , i downgrade from ROM 1.66 to 1.60.00WWE
thanks
steven
Click to expand...
Click to collapse
sharing your problem in www.forumponsel.com in pocket pc forum maybe some friend can help you.

Related

HTC TyTN French Official ROM Upgrade

RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship
http://www.smart-phones.be/
I'm thinking It's WM5 AKU 3.3.1. but i must go ....
Hello,
Can you please upload it on rapidshare or similar.
My IMEI is not accepted on smart-phone site.
Thanks,
Regards
Same for me : my IMEI is not accepted ...
If somebody could upload the file ...
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
hi,
thanks for he head up, i have downloaded the rom but i have a question will i lose warranty if i install this rom ? should i consider it official rom as in from "europe htc" ? and finally can i do the upgrade using windows vista with Windows Mobile Device Center ?
thanks,
i||uSi0n^
dorways said:
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
Click to expand...
Click to collapse
Thanks, will try this one...
This 's extract version from RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
OS+EXTROM (no radio,IPL,SPL) request hardspl olipro.tested
http://rapidshare.com/files/28244789/RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275.rar.html
Good rom
viva belgium
voice command 1.5 prob
HI,
did upgrade with this rom and everything is ok... but VC 1.5
each time i start it, it says Vc has encountred a problem , restart it and retry.
I also noticed that VC settings has now an "activated " and "pswd protected" check box. the problem is that, if i toggle the activated checkbox and klick ok , it won't stay toggled .
Can anyone help me please
Thanks
Th
No problem for me.
The audi car kit's issue is solved but the screen alignement's probleme still...
perfect for me too
I can't turn on my wifi anymore. Who has the same problem ?
fine for me, sorry
for me too, no pb with wifi.
try a hard reset
Hi all,
I would like to send my hermes for repair and upgrade to this ROM but my bootloader is still SPL-1.40.olipro !
How can I replace them?
Hi,
I need this rom, but the link does'nt work anymore. Could someone re-upload it or send it to me ?
TIA
Grom

no service after upgrading to Hima_-_Helmi_AKU3[1].5_ROM_SP2 ROM

dear gentleman,
im werner from germany and first there are excellent people in this forum. many thanks to this peoples. my problem is designed as following. by the way i am a great newbee in pda.
i get a second hand qtek 2020 from vodafone as a gift and i want to upgrade to any english version. i have to install some programs in english so i dont want install the programms on a german user interface.
so i had read and read and read postings in this forum an finally i upgraded my device to helmis version of wm2005. my device is working properly but when i want to phone i see "no service" in the display. so i have upgraded to radio version 1.18. same problem. can anyone in the forum help me to fix this issue??
many thanks
werner
does it ask for the pincode?
does it work with other simcards as some sim cards are simply incompatible with some devices
and did you unlock the sim lock ?
hello rudegar,
many thanks for your help , i tried it once more and installed the rom on my phone again. i did not make the hard reset on my phone correctly. the phone and i hope all programs works now very properly.
greets to all people in the forum from germany
werner

I think i bricked my Prophet... i need help

I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!! and i need to download nvid(no vendor) aku 2.2!!!
Read man Read. Research on this forum. This forum has grown too big to start posting questions at wrong places.
every question is answered if you read properly.
Read the wiki!
UsmanB said:
I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!! and i need to download nvid(no vendor) aku 2.2!!!
Click to expand...
Click to collapse
Not to worry mate ...if u can get the start screen it means ur phone is alive and still have chances to recover it
Pls read the wiki. roll back to WM5 if required..always remember to chk if ur device is G3 or G4
Best Of Luck
http://grafikdesign.wordpress.com/2008/10/26/xda-neo-prophet-qtek-s200-recovery/
There is a downloadlink fort a G3 or G4 RUU.......Install and be happy
need help please ...........
same fault happend to me .
just stuckd on boot screen with 3 or 4 colores and IPL 2.10.0001 , SPL 2.10.0001 !!!
what does that mean ? do i relly brock up my prophet ?
i was just trieng to upgrade damn it
AlGhdewi said:
same fault happend to me .
just stuckd on boot screen with 3 or 4 colores and IPL 2.10.0001 , SPL 2.10.0001 !!!
what does that mean ? do i relly brock up my prophet ?
i was just trieng to upgrade damn it
Click to expand...
Click to collapse
Upgrade from to What ROM? please explain in detail.
And you need to read the guide first, because as far as I know, you haven't HardSPL your device.
If you still see the bootloader (three color screen) it means the device still can be recover.
i tried to upgrade it from WM5 to this Blue manilya romhttp://forum.xda-developers.com/showthread.php?t=449283
please how can i still fix it from the boot screen!!
I don't know how many times I'm going to have to say this, but the answer is on the Wiki!!!!
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

Expert Only!!!!!!!!! Prohet Dead Long Time

HI ALL
I AM IN BIG PROBLEM SINCE MORE THAN ONE YEAR
MY PROPHET JAMIN G4 STCKED IN THREE COLOR BOOT SCREEN
AND I HAVE THIS ON THE SCREEN
IPL 1.000
SPL 2.20.001
ALL THIS HAPPENED AFTER I WAS UPGRADING AND I THINK I USED AN INCORRECT SOFTWARE
I TRIED MANY AND MANY AND MANY ROMS AND I READ ALL POSTS AND I TRIED HARD REST AND I DID EVERY THIN AND IT IS IN BOOT ,OADER AL THE TIME EVEN THE ROMS MAY PASS TILL THE END AND SAY CONGRATULATION AND ON PHONE 100% BUT AGIN WITH RESTART IT IS THE 3 COLOR SCREEN
I THINK I PUT G3 ON G4 DEVICE IS THERE ANY SOLUTION
PLEASE HELP ME
THANKS
http://forum.xda-developers.com/showthread.php?t=389558
You read all the treads. Let me laugh. In 5 minutes I found this tread here, and there is the answer in the first site. Good luck.
i think i said expert only
sorry for saying this
but i think i brick my phone so i need expert help and i can pay for this
so please expert only
thanks all
all_brother2002 said:
sorry for saying this
but i think i brick my phone so i need expert help and i can pay for this
so please expert only
thanks all
Click to expand...
Click to collapse
Hä, do you think the Moderator l3v5y is no expert. I don`t know your problem, pardon, you can read in this tread, how do you wakeup your prophet. If this not go, than you must bring him in prophetclinic, or when you have no money than you have no luck.
hi
thanks so much for ur interest
i want o repair my phone that is all
and i can pay but i do not where i can repair or to whom i can send i am in egypt and i caled htc company and i mate company they said we do not work in this model can u imagine this
so if u know any one who can help i am ready to send y phone and pay
and again sorry for my acuusing about no expert
thanks
hi am from k.s.a i had the same proplem but if you dawnload the orignal rom from i-mate web site ftp://ftp.clubimate.com/ it may work i did tray a lot of roms none of them workd exsept the one from the site.
soory for the bad language!!!
Expert only?
Search this site and you will find the original ROMS that came with your phone. you will allways have to downgrade to restore it! I have had many HTC go wrong on me. I use an old trusty favourite Prophet_4.0.0.0.4_PV.zip Good luck!
Just Click on the first link, follow the steps and you can go.
Just go to bootloader,
DO HARD-SPL
Then flash again!
and u can drive away with your new OS on your old Prophet! xD
have fun!
sorry
i think no one understand me here in this post i am sayig i have ipl 1.000
and spl 2.20.001 so i have ipl for g3 on my spl g4 i mate jamin so any one have solution or i will destroy this mobile
I just think, you need to try to install the original jamin rom again.
or just Qtek rom: http://www.qtek.nl/_BIN/PRO_DT_WWE_220734_2207114_026121_Ship.zip
then it will be ok. and you can try to upgrade again
have fun!

plz ,, i need to wm5

hi huys plz can anyone post a link for downloading the originally wm5 for imate jamin ,, coz i cant create an account on imate website
and that will be for charity lol
creepy11 said:
hi huys plz can anyone post a link for downloading the originally wm5 for imate jamin ,, coz i cant create an account on imate website
and that will be for charity lol
Click to expand...
Click to collapse
Why not NVID??
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
WM5 (Prophet unbrick too RUU )
dioxda2 said:
Why not NVID??
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
WM5 (Prophet unbrick too RUU )
Click to expand...
Click to collapse
after installed at 95%, there is "this NBF file cannot be used for your PDAphone. please check your NBF file "
where's the problem ?
I pushed down left small hole button of my Qtek S200 and now it hangs on bluescreen
Hello all,
I pressed down left small button of my Qtek S200 and now it is hanging after after taking a normal start on blue screen. I tried to fix the problem but I am unable, can any one helpme. my email is [email protected]
dioxda2 said:
Why not NVID??
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
WM5 (Prophet unbrick too RUU )
Click to expand...
Click to collapse
hi.... is there any possibility to CID or SIM unlock phone stucked in bootloader? i've tried to upgrade, and f*cked up, and i noticed that IPL and SPL had changed then... now it is 1.01 for both of them.. and i don't remember what values they had before...
ausgemachte said:
hi.... is there any possibility to CID or SIM unlock phone stucked in bootloader? i've tried to upgrade, and f*cked up, and i noticed that IPL and SPL had changed then... now it is 1.01 for both of them.. and i don't remember what values they had before...
Click to expand...
Click to collapse
Sorry to say that for cases of G3 G4 mess up flashing...... better bring it to factory.....

Categories

Resources