I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!! and i need to download nvid(no vendor) aku 2.2!!!
Read man Read. Research on this forum. This forum has grown too big to start posting questions at wrong places.
every question is answered if you read properly.
Read the wiki!
UsmanB said:
I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!! and i need to download nvid(no vendor) aku 2.2!!!
Click to expand...
Click to collapse
Not to worry mate ...if u can get the start screen it means ur phone is alive and still have chances to recover it
Pls read the wiki. roll back to WM5 if required..always remember to chk if ur device is G3 or G4
Best Of Luck
http://grafikdesign.wordpress.com/2008/10/26/xda-neo-prophet-qtek-s200-recovery/
There is a downloadlink fort a G3 or G4 RUU.......Install and be happy
need help please ...........
same fault happend to me .
just stuckd on boot screen with 3 or 4 colores and IPL 2.10.0001 , SPL 2.10.0001 !!!
what does that mean ? do i relly brock up my prophet ?
i was just trieng to upgrade damn it
AlGhdewi said:
same fault happend to me .
just stuckd on boot screen with 3 or 4 colores and IPL 2.10.0001 , SPL 2.10.0001 !!!
what does that mean ? do i relly brock up my prophet ?
i was just trieng to upgrade damn it
Click to expand...
Click to collapse
Upgrade from to What ROM? please explain in detail.
And you need to read the guide first, because as far as I know, you haven't HardSPL your device.
If you still see the bootloader (three color screen) it means the device still can be recover.
i tried to upgrade it from WM5 to this Blue manilya romhttp://forum.xda-developers.com/showthread.php?t=449283
please how can i still fix it from the boot screen!!
I don't know how many times I'm going to have to say this, but the answer is on the Wiki!!!!
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Related
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
hi,
i have o2 xda neo , and i can install all roms without shadow , when i install shadow (all versions) after installation , device is rebooting but just waiting on bootloader screen. why ?
Sorry about my bad english
ygtsen said:
hi,
i have o2 xda neo , and i can install all roms without shadow , when i install shadow (all versions) after installation , device is rebooting but just waiting on bootloader screen. why ?
Sorry about my bad english
Click to expand...
Click to collapse
have you HARDSPL your device?
What is your SPL information?
yes , i tried it with Upgrade_HardSP_G3 and my SPL info is 2.15.0000 i have to do ? and nothing change when i hardspl my device , still the values is same
When the value is still the same.. Never and ever update with RUU.. it wil stuck on bootscreen..
Follow and take a look here..
http://forum.xda-developers.com/showthread.php?t=353547
G3 seems have PROBLEM with HARDSPL..
but dioxda2 has give this beautiful instruction..
just try it..
i download that file which is in link, i try to do that but when i copy slp files to device , the sortcut doesnt work, please help
OKay.. first
go back to WM5..
download this file.
http://rapidshare.com/files/72839727/Prophet_PV_Temp2.rar
this is PDA VIET Temp No Vendor..
Go to bootloader and upgrade with RUU..
this Update with bring you back to WM5 No vendor.
After that
Go to the thread http://forum.xda-developers.com/showthread.php?t=353547
Download Upgrade HARDSPL G3.
Follow How To HARD SPL
after that your SPL information should be 2.G3.4PDA .. Cos you said your device is G3.
Once your SPL changed..
you can install Shadow in your Device.
Thank you very much its now 2.G3.4PDA now im trying to install shadow 2.0
ygtsen said:
Thank you very much its now 2.G3.4PDA now im trying to install shadow 2.0
Click to expand...
Click to collapse
you are welcome..
Shadow is working now thank you for all
I have the above wm smartphone,its not sim locked or something.
I want to install wm6 and also i want some support for greek language.
Please tell me what should i do cause i am a total noob on windows mobile and i am affraid that i might brick it.
Is there anyway i can unbrick it if it bricks?
Thanks a lot...
please guys help me,I dont want to ruin my ppc
I bought it from ebay so i forget about the warranty...
it had only been an hour.. give people time to reply.
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Gherudos said:
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Click to expand...
Click to collapse
you have to HARDSPL first.
Info here.
http://forum.xda-developers.com/showthread.php?t=350033
If your device is G4. Your SPL should change into this one 2.G4.4PDA or 2.G3.4PDA for Device G3
If your SPL not one of them. You will always stuck up at bootloader mode.
Did you didnt read , how to upgrade it.
I wrote it at my Thread.
You must hard SPL before upgrading! If you want to have the device in greek, try Gullums Coffee ROMs.
hi to all,newbie here.
my problem:
prophet dopod 818pro,as i read on label,still in 3 colours mode.
i see on display:
ipl 2.10.0001
spl 2.g3
what i can do for restore?
in origin the prophet is g4,as i know,and after one bad update this is result.
tnks to all.
ps.
i have taked a look in wiki and lot of topics,but i need help for start,how to force the upgrade or restore,how to connect the htc to pc whit win xp etc...
nykocam said:
hi to all,newbie here.
my problem:
prophet dopod 818pro,as i read on label,still in 3 colours mode.
i see on display:
ipl 2.10.0001
spl 2.g3
what i can do for restore?
in origin the prophet is g4,as i know,and after one bad update this is result.
tnks to all.
ps.
i have taked a look in wiki and lot of topics,but i need help for start,how to force the upgrade or restore,how to connect the htc to pc whit win xp etc...
Click to expand...
Click to collapse
You have a G3 SPL on your G4 device. Not a lot you can do...
EDIT: The most progress on this is here: http://forum.xda-developers.com/showthread.php?t=384235
I Need Help PLS 818pro 3 colour screen
I Have A Dopod 818pro, yesterday I Download This Rom Prophet_S4V.19701.01_F N i upgrade It But Now Be come 3 Colour Screen only
cant boot in win IPL 2.210.0001 SPL 2.20.0001 it is dead ??????:
egghead7 said:
I Have A Dopod 818pro, yesterday I Download This Rom Prophet_S4V.19701.01_F N i upgrade It But Now Be come 3 Colour Screen only
cant boot in win IPL 2.210.0001 SPL 2.20.0001 it is dead ??????:
Click to expand...
Click to collapse
You need to flash an official ROM, and then apply hard/soft SPL to the device.
Hei Bro i try that original Rom. Still ask for New NBF Can u help me or Post new rom to me thanks
egghead7 said:
Hei Bro i try that original Rom. Still ask for New NBF Can u help me or Post new rom to me thanks
Click to expand...
Click to collapse
Use an NVID ROM from the wiki.
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
loginvicky said:
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
Click to expand...
Click to collapse
do you have spl 1.2 or 3.5 and can you get to Bootloader screen ( that tri color screen)
spl 1.2 and to get to the tri colour screen wat sud i do ???????????
plz help irius wat next ????????????
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
to get to bootloader press camera + reset and make sure you don't have mini sd card in
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
Hi
Don't Panic. Press cameraButton+ Reset by stylus for few seconds then you get the tri colour screen.
Then you you update again with Radio 1.5.7.000. You will be ok if you have spl 1.20
Good Luck
God bless you both, thank god the tri colour screen did appear but when i tried the radio rom 1.57 flashing again, it goes till 7 percent then again shows error of rom image file corrupt please check kinda stuff, this is the same error which i got umpteen times after which the athena got stuff in the htc logo mode ........... still its there and yes that tri colour screen does come up.... plz help what to do next........ i dont want want to upgrade my radio now ...its ok even if i am able to boot in to my old good 6.0 os...., also the bootloader is 1.0 version not 1.2 .........plz guys help i really would pray to god to bless ur souls........ u are doing a fine job thanks.....
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
just lemme know if any ruu i could use in the bootloader mode that should bring to life my now almost bricked dopod............plz smbdy helpppp
loginvicky said:
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
Click to expand...
Click to collapse
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
sabes143 said:
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
Click to expand...
Click to collapse
After the above you'll be in spl1.2. You can only flash spl 1.2 based Rom. Do not use any SPL3.5 ROM
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
loginvicky said:
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
Click to expand...
Click to collapse
Are you sure you want to get there? It is a one way street. You can't come back once you get there. This means you would have less choice in ROM. You can't run your original ROM anymore. If you need to send it in for warranty, you may have problem as you would have clearly shown that you have voided the warranty condition (depending on how alert the service guy is, you may or may not be caught, but just because many manage to get away does not mean that everyone would get away) You must have got the wrong impression that it is better. It is not the case. Many who are there are waiting to come back, but can't for now.
Everything you get in spl3.5 ROM you can get in spl1.2 ROM, except with spl1.2 ROM you have more memory for yourself.
Think carefully, and think again, and again, before you get there.