XDA II - Broken connector USB - MDA II, XDA II, 2060 ROM Development

Hi,
I have broken the connector usb of XDA II, I can use something in order to modernize the rom?
Tanks

I dont think so , because in order to install a new Rom the device needs to be restarted and it puts itself in the Bootloader menu so it communicates only throught USB , hard Luck :evil:

What about SD cards..
I believe that you can use a SD card to upload a ROM image to the device..

Bonzo said:
What about SD cards..
I believe that you can use a SD card to upload a ROM image to the device..
Click to expand...
Click to collapse
Hi
Some reference (link-forum) to this procedure.
Tanks

Related

How to uprage to wm2005 using SD-CARD procedure ???

As a result of a car accident I lost the ability to connect my Himalaya using the USB cradle. The data port on the phones board was completely smashed. I had it repaired only to allow my xdaII to recharge from it's power adapter but not from the cradle, that's how I lost all usb functionality.
Now I've previously read some methods and instructions on how to upgrade the xdaII using some modified rom files which are then stored on a SD-Card and then installed from the bootloader without the use of a USB connection.
Can anyone here tell me exactly how this is done ? What are the steps needed to convert the available rom files on this site to a format that would work from the sd-card ? I would also like to know, whether this method supports upgrading the radio and the extended rom in addition to the windows rom ?
Your help and assistance on this matter will be highly appreciated. As I can no longer upgrade my phone using the usb method. I will be depending on your help you guys. I've got faith in u, so don't let me down.
I also want to know it! Please help!!
Find another xda2 that has a working USB connection, insert your SD card in it, and use the attached file to copy the rom to your sd card. Then place the sd card in your xda2 go to boot loader mode and that is it.
The only problem is that whenever you want to change the rom version you will have to use another xda2 that has a working usb to transfere the rom image on your sd card.

Prophet Flash problem !!!!!!!!!!!!!

hello all, is there any way to falshing prophet from SD (memory card) cuz my USB socket on my device is got broken but it able to charge
plz give me any info about this .. thx
khsanad said:
hello all, is there any way to falshing prophet from SD (memory card) cuz my USB socket on my device is got broken but it able to charge
plz give me any info about this .. thx
Click to expand...
Click to collapse
Only way to flash from SD is when flashing a ROM dumped directly from the phone as a backup.. even then you needed USB to let your PC tell your Device to dump the backup to SD.. The dump data on the SD card cannot be read as files because its RAW data.. There is no way to extract that data to a ROM file and likewise no way to flash a ROM file available here or anywhere to the device through the SD card..
So in theory.. if you had 2 HTC Prophets you might be able to flash the 1 device through USB, Dump the ROM to SD and use that SD card to flash the 2nd device.. This is only in theory! Never tried it..
Curiously though.. if your USB port is damaged how do you charge it?

[Q] SD card reader problem on USB OTG

Hi!
i have a bug...
USB Pendrive via OTG: fully working, but SD card reader with micro SD: wrong work.
Long file copy is impossible...error:
"The usb storage is unexpectedly removed!"
why?
no errors in otg with pendrive!
sorry for bad english!
current versions:
rom: simplistic jb (stock xxlsj 4.1.2)
kernel: jeboo v1.3b for xxlsj
WreeD-X said:
Hi!
i have a bug...
USB Pendrive via OTG: fully working, but SD card reader with micro SD: wrong work.
Long file copy is impossible...error:
"The usb storage is unexpectedly removed!"
why?
no errors in otg with pendrive!
sorry for bad english!
current versions:
rom: simplistic jb (stock xxlsj 4.1.2)
kernel: jeboo v1.3b for xxlsj
Click to expand...
Click to collapse
Firstly, it might be possible that your phone doesn't have the required drivers of the card reader....I too had the same problem once when i connected a local china card reader to my phone via OTG, it didn't work at all...just the light was blinking..
Then I tried an iball card reader with the same memory card...it worked perfectly..
Remember that our OTG doesn't support reading ntfs file system type...you'll need an app for that...make sure the mmc you're using is FAT32..
Whereas for that "removed unexpectedly"...Which OTG cord are you using???
Is it the official Samsung OTG?? Or you purchased just something from eBay..
Coz I had bought 2-3 via eBay, every piece gave the same problem...but the official one didn't...So try out the official OTG once and tell whether you experience the same problem or not..
Press thanx if i helped..
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
WreeD-X said:
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
Click to expand...
Click to collapse
Here's an example - I live next to a small road. I can drive on it to work and back home in my car just fine, but an 18-wheeler couldn't.
Sent from my digital submersible hovercraft.
WreeD-X said:
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
Click to expand...
Click to collapse
Well...even if its not the official one...its a good copy of it, the hardware structure of these otg's are similar to that of the official ones... else it wouldn't work properly nor anyone would buy it (ofcourse they made usable/functional otgz which would sell and be cheap for everyone)..
Simply to put it its a temporary otg which people buy to check out how good and useful the function of otg is to them.... If they're using it pretty frequently then they should go and buy the original one. ..if not then its just another accessory of the phone kept worth you for emergency times. ...
Try and see whether the problem still persists with the original otg and post...

[Q] formatted usb storage in clockworkmod

I have unfortunately formatted my usb storage which contains cwm.zip and custom rom....
now whenever i boot the device there's no sd card avilable...
I tried by inserting exrternal sd card also and connecting phone to PC via usb but in Pc also, I cant find the drive (may be coz of no drivers ???)
I want to change the custom rom i have installed because it doesn't show sd card and cant find network so my phone become useless...
please help me to get back my usb storage so that i can install another custom rom...
Thanks in advance..
milandelu said:
I have unfortunately formatted my usb storage which contains cwm.zip and custom rom....
now whenever i boot the device there's no sd card avilable...
I tried by inserting exrternal sd card also and connecting phone to PC via usb but in Pc also, I cant find the drive (may be coz of no drivers ???)
I want to change the custom rom i have installed because it doesn't show sd card and cant find network so my phone become useless...
please help me to get back my usb storage so that i can install another custom rom...
Thanks in advance..
Click to expand...
Click to collapse
get a card reder and download rom again in pc or internet cafe if you already have in pc good put rom and flash
kenxda33 said:
get a card reder and download rom again in pc or internet cafe if you already have in pc good put rom and flash
Click to expand...
Click to collapse
I have custom rom in pc but hoew can i push it in mobile??? Because i have formatted my usb storage and sd card is also not detected???
I have searched and i think its only way to flash new rom usin internal memory but i dont know how???
if u can provide adb commands and mount my usb storage.. plz..
milandelu said:
I have custom rom in pc but hoew can i push it in mobile??? Because i have formatted my usb storage and sd card is also not detected???
I have searched and i think its only way to flash new rom usin internal memory but i dont know how???
if u can provide adb commands and mount my usb storage.. plz..
Click to expand...
Click to collapse
look heare link
http://forum.xda-developers.com/showthread.php?t=532719

[Q] Using USB adapter to SD to flash ROM's

Hi, I have just been reading the thread about how to flash a ROM on to a phone without SD. My phone unfortunately does not come with a sd card reader so i might be unable to flash ROM's. Does anybody know if there is a way to do this, or if you could use a micro USB to SD adapter to be able to make this work.
RavingSmurfGB said:
Hi, I have just been reading the thread about how to flash a ROM on to a phone without SD. My phone unfortunately does not come with a sd card reader so i might be unable to flash ROM's. Does anybody know if there is a way to do this, or if you could use a micro USB to SD adapter to be able to make this work.
Click to expand...
Click to collapse
well, it sort of depends what phone you've got. what model is your phone?
(but yes, you can "adb sideload" a rom from a computer with many devices, or even install from internal storage space.)
microbot118 said:
well, it sort of depends what phone you've got. what model is your phone?
(but yes, you can "adb sideload" a rom from a computer with many devices, or even install from internal storage space.)
Click to expand...
Click to collapse
I have the xperia U i would be interested in how you can install the rom from your computer
RavingSmurfGB said:
I have the xperia U i would be interested in how you can install the rom from your computer
Click to expand...
Click to collapse
ok it looks like you will be able to, what android version is your phone? Check under settings ---- about phone. And have you rooted your phone yet?

Categories

Resources