Related
Dear all,
I am new to the XDA phone >o<...recently, I had O2 XDA phone which I tried to go to the boot - loader menu (power on + reset)
and now I could manage to go back to normal startup...
is there any expert here could kindly advise me what to do ??
many thanks
Just do a reset....
Stefan
thx for the reply...
i press the reset button and I can only hear a "Click" tone from the phone and the screen still doesn't show up
The only way to make the screen showing up is by pressing reset and power button together (but it brings me to the boot-loader screen)
>_< crying
Maybe your ROM is defect.
Try flashing a new ROM on the device....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi,
have you sorted this one out? I have bought one and have the same problem - when I do hard reset, Wallaby boots and diagnostics is shown. All tests work. When I do soft reset, backlight of Yes and No buttons is on for a while but nothing is on the display and Wallaby just makes some very short sound. Then nothing, no Windows in the house. Anyone has an idea? Thanks.
// edit:
I have made some progress: while in the state when the display shows nothing and backlight of buttons is on, the device, while in cradle, is able to be connected to with activesync. Hope I have specified the problem little bit more.
o2 xda neo 2.15.4.29.GER rom
hi,
my O2 xda neo cannot start up and,
i look for o2 xda neo 2.15.4.29.GER rom.
is there anybody who know where i can find it?
please help.
thanks already now...
Re: o2 xda neo 2.15.4.29.GER rom
junk_dealer said:
hi,
my O2 xda neo cannot start up and,
i look for o2 xda neo 2.15.4.29.GER rom.
is there anybody who know where i can find it?
please help.
thanks already now...
Click to expand...
Click to collapse
Wrong Forum, cause it´s not a Wallaby device....
But Try this one, hope it´s te right one.....
http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/update/xda-neo-update.exe
Version 2150429_21504115_02921 (ca. 51,3 MB)
Stefan
hello friend
Can I ask you'll with my problem. first i confuse my cousin xda wallaby cann't boot to os, the O2 logo doesnt appears the device only appears like television that don't have channel and if i press power and softreset it came up with red, green. blue and wallaby bootloader v5.17, gsm ok. can you tell me what the problem with it?
Thank You
Looks like your device have no, or a corrupt ROM.
Try reflashing it via SD-Card.....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
calling for help here,playing too much to flash this handset, and in my last progress to flash it...after 100% finish...nothing comes up,not even BL mode...
just black out..i guess my hp dead...right?
any solution?or i have to take to HP service centre?
however connect to the usb,the led light green/red still on...
any body help??
no1?
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
HP 6828 Dead Lock due to Flashed with Atom Rom
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
nhocbanme need your very kind help,
my buddy mistakenly flashed my HP 6828 using different Rom, probably using Atom Rom and as result my HP 6828 seems heading the the end of the world.
Please advice me what should i do to recover back my pity 6828 life ?
thanking You in advanced
Eddie
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thank's.....nhocbanme
alimx said:
thank's.....nhocbanme
Click to expand...
Click to collapse
mm guys dats nt a problem u can retrieve it am aso using ATOMS bbot loader her hp rw6828
nt u need to flash 1ly d ROM>....to a Supported aii recommend u to use helloworlds ROM...
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Oh ! yes ! insert the miniSD and do the step again.
my 6828 upgrade to WM6.1 now !!
Thank you very much, I was going crazy and I thought I had a brick but in the end without problems and is updated and I ok
forgive me for the English from google
jeswang said:
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Click to expand...
Click to collapse
All settled.Thank you guys.
6828 dead
con't boot when iput the battery red&green button lights on... help me!
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Chanutpong said:
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Click to expand...
Click to collapse
This solution worked for me today! my rw6815 was just like yours!
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
You're Master!!!
help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
help
Exclamation help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
i just wanna upgrade my atom life to 19209 medkid
this is my first time of flashing it.
i just could not...
when i press reset+record button....it just reset but not going to boot loader mode
do i need to unlock something first?
i have tried 1g,2g minisd...
also format the card and just put the firmware..till didn't work
Release the Reset button first, then realease the Record button when the screen is on.
aa125690 said:
Release the Reset button first, then realease the Record button when the screen is on.
Click to expand...
Click to collapse
it does solve my problem...thx
Hello friends!!!
i am very much new in this field. i have Orange SPV M3100. i updated its Rom to K's Rom. My WIFI was dead. i read the thread "dead wlan due to erased EEPROM" which helped me out to solve my problem. but during this process, i dont know when, my Herm100 converted to Herm200.
now the problems i am facing are that i cant SOFT RESET my herm using stylus. i want to update Rom using SD card, but as i cant soft reset, so i cant.
i will be very thankful to all u guys for helping me to solve my problem. i am alreadt thankful to XDA_DEVELOPERS.
plz explain in detail.
you can use the power button or take out the battery to reset.
thanks brother, but i thought taking out battery might cause some problem to my Hermes. anyways, i am already using the same method. but the question is
"why my hermes doesnot soft reset when i put the stylus in the reset hole"
what might be the problem?
if your presing and not soft or reset , maybe your reset button its broken or need a resoldering this (internal) for check you need open the htc and check the pins conectors its correctly soldering to pcb, it is in warranty go to your SAT