hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
Related
I had a problem with the power button not working and I was adviced to reflash the original ROM (I never did a ROM upgrade) so I picked the original and latest Cingular ROM. Flashing strated and then hung for a while @ 80% progress, few minutes after continued up to 95% progress and at that point I got ERROR 326 message (INVALID COMMAND) stating that the NBF file couldn´t be used for this phone. I dissconnected the phone and did a soft reset and what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4, this time it went all the way to 100% progress and the congratulations screen, I made a soft reset (the only way I know to exit the bootload mode) and I got momentarly the HTC innovation screen and right away dissapeared to enter in bootload screen again.
Then I reflash ROM with RUU_Qtek_9100_AKU2_21878_024711_ESN_G4, this time it went all the way up to 100% and success screen appeared, the phone rebooted and is up and running although with inoperant power button.
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
luiggi said:
what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4,
Click to expand...
Click to collapse
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
There's no secret to flash while in bootloader screen. Use the RUU file. It might take a little while longer to detect the phone but goes all the way to the end
Yes, it has to be a hardware issue
mestrini said:
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
Click to expand...
Click to collapse
I´ll try the disassembly and perhaps is not a big deal to fix it, I got a copy of the service manual posted in some of the forums, and I´ll give it a try.
Thanks for the advice!
You just do it!
vlada said:
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
Click to expand...
Click to collapse
Try first a soft reset while in the BL screen, if doesn´t react then do what I did:
I just plugged the USB cable and run the RUU!! As simple as that and as risky as the ROM you select not being the right one.
Hi
Just got a prophet and ran a wm6 installation
now I can't get past the startup screen; it freezes where it shows the OS versions. Reseting it doesn't work either. My PC cant connect to it, altough it detects it for a few seconds when I power it up.
Thanks
fonzy99 said:
Hi
Just got a prophet and ran a wm6 installation
now I can't get past the startup screen; it freezes where it shows the OS versions. Reseting it doesn't work either. My PC cant connect to it, altough it detects it for a few seconds when I power it up.
Thanks
Click to expand...
Click to collapse
OH noooooo , you broke your phone!!!!
Ah just kidding ... you haven't broken your phone! not yet
Just read this guide you will be fine :
http://forum.xda-developers.com/showthread.php?t=310452
This has been explained in the above guide but just to make you feel better about your phone try this :
Hold Camera button and press reset. keep holding the camera button till you get to a screen with 3 color (bootloader screen). then connect your phone to your computer and flash a wm5 ROM
Good luck.
OK got it !
Thanks
BTW does labatt ice still taste like it used to?
Hi all
I know that there's millions of threads about this but believe me I've read them all and nothing seems to work for me.
I'm trying to upload a new room in my prophet but as soon as the mobile reboot nothing else happens. I've got a black screen and nothing else.
I've tried all the key combinations to reach the bootloader I even tried to run bootloader.exe directly from the mobile but nothing.
At this moment I'm pretty stuck with the room I've got and I really want to change it , any advice ?
I've tried:
camera+softreset
Commanager+softreset
in both cases I kept press the camera and commanager botton .
I've also tried other combination but without the behaviour expected.
Thanks in advance
Look forward your reply
All the best
Pedro
Turn the device on, whilst it is booting try holding the comm manager button and do a soft reset.
Try performing a hard reset (hold BOTH the camera and the comm manager buttons and soft reset), to see if you get text displayed. Don't bother actually doing one.
What ROM do you have at the moment? Have you tried unlocking (sim) your device? Have you used hardSPL or SoftSPL? What numbers are shown after the device boots up (red text in the top left of the screen)?
I´m using Shadow_My_Edition_2_no_DualSIM.
I've used HardSPL
ipl 2.9.000.1
spl 2.g4.4pda
gsm 02.47.21
os 5.2.20.21
I've started facing this issue only after this room has been uploaded, other odd thing that my prophet is doing is that the prophet only reboot if it is connected to the usb port in my laptop or to the charger directly, otherwise it enters in a continuous reboot.
I'm trying to get rid of this room but I'm not able to ....
maybe solution
http://forum.xda-developers.com/showthread.php?t=292667
try my solution for that kind of problems connect it to charger as described and then do a flash of a basic rom.
possibly u flashed a wong rom
Hi
That was a great solution, fortunately I there was no need to get so far .
Guess what I've changed the USB cable and the flashing procedure went as expected.
It´s kind of strange the behavior that my was getting but now I'm track again , ready to flash and test some rooms.
Thanks all for your replies.
BR
Pedro
Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end
OK title says it all, and yes I have been reading for the last 3hrs, all the possible solutions.
HD2 EU Vodafone UK
So here is what I have tried:-
Task 29 + flash stock rom - stuck -
Hard reset - stuck
remove HSPL - stuck
flash latest Vodafone rom from HTC 3.14.161.3 - stuck - also SPL now 3.03
flash old stock to downgrade SPL to 1.66 - stuck
Have also tried reinstalling MAGLDR - stuck - magldr doesn't even show.
I never get flash failed, and yet it will not get past the Tri coloured bootloader.
Also I cannot get it to flash from SD. I have tried holding the endcall and vol down but it just goes to the loader.
Vol Up and endcall goes to hard reset.
And, to make it worse, it's not even mine. I was returning it to Winmo for a mate.
Phones been running Android nand since March without problems.
All suggestions welcome.
Bixx said:
Vol Up and endcall goes to hard reset.
Click to expand...
Click to collapse
that would indicate a stuck volume down button, since hard reset is volup and voldown. (You dont need to hold power, tap and release it, its teh vol buttons you hold)
You are quite right about the vol up and down for reset.
Also, I had been considering the possibility of a stuck button.
I will see if i can prove or disprove it.
Thanks for the response.
Does anybody know how many buttons are in the volume control rocker?
Is it:-
1 for down volume
1 for up volume
and another for both when you hold both in?
I am still trying to decide if the down volume button is stuck on.
When I hold both down I can get into reset mode, but if I only press the up it still goes to tri colour.
So I am still not sure if the down is stuck on.
3 buttons in the rocker could explain why up only doesn't go to reset but 2 buttons only would confirm that the down is not stuck on.
All comments welcome
two, you can feel them click on individually when you press them.
I too can only feel 2 and that would imply that the down is not stuck.
When I hold the up button and switch on it goes to boot loader, if it was stuck shouldn't the phone have gone to reset?
I was hoping it was like a mouse wheel with forwards, backwards and click down which is 3 positions.
I'm running out of things to try.
If it's not stuck why does it keep going to bootloader with out being asked?
Why can I flash roms and HSPL without any failure messages but still find no change on reboot?
Thanks for the replies and please keep them comming
I have managed to flash from SD. I tried a different card.
I have attached a pic of the screen saying update complete, update success.
But still stuck in bootloader
well, if it isnt hardware, it must be a corrupted bootloader issue, or bad nand blocks perhaps. ive seen quite a few 'only enters bootoader' threads over the yrs, but never really noticed a solution.
sorry, no suggestions, other than perhaps give teh freezer trick a go?
I'm desperate enough to try almost anything.
I will have to read up on the freezer trick.( don't want to kill it completely)
I have also contacted a couple of repairers for a quote using Jtag. the first said "sorry bricked" and I'm still waiting for the second reply.
Also reading up on Goldcards, maybe that's another option?
Thanks again for the reply.
Bixx said:
I'm desperate enough to try almost anything.
I will have to read up on the freezer trick.( don't want to kill it completely)
Click to expand...
Click to collapse
cant hurt to try.
I have also contacted a couple of repairers for a quote using Jtag. the first said "sorry bricked" and I'm still waiting for the second reply.
Click to expand...
Click to collapse
lol, probably scared of doing it (it requires dismantling teh phone, and theyre notoriously easy to break, there are loads of threads here where someone took theirs in for a fix and the vol/bottom button/screen ribon cables got broke by the shop.
Also reading up on Goldcards, maybe that's another option?
Click to expand...
Click to collapse
could be tho unlikely (sorry) goldcard flashing is just sd flashing but bypasses carrier and region checks.
if you can get the serial of your sd card, i can make you a goldcard image, no problem. (Don't bother using the free goldcard page on revskills website, its for android and wp7 phones) . PM me the serial and an email address if you want one.
@samsamuel Thanks for all your help and advice.
I have sent it off for repair today.
As I said in the first post, it's not even mine I was re flashing winmo 6.5 so my mate could sell it.
Hopefully it will be all sorted now.
Update.
I contacted 3 repairers.
1st said "sorry dead"
2nd said "£40 + postage"
3rd said "£21 which became £29 all in"
So I sent it to 3rd one, got a quick reply "sorry unable to fix, here is a full refund" and they returned it via 1st class post.
So yesterday I've got the phone in my hands, poped in the battery and I am presented on screen with a triangle and the words "flash failed please try again"
So task 29, now back with a tricoloured screen. See attached.
Now tried a custom Winmo, and it works
So I tried 2 Vodafone and 1 O2 stock roms and they all failed at 9%.
Tried another custom Winmo, and again working
So finally, I have task 29, CLK, clockwork v5 and latest MIUI. All working just fine.
Is there a stock looking custom winmo that anybody can recommend?
Hah, a lucky outcome. The radio is stuck, hence stock roms failing, but lucky for you its still a working radio, so customs are working. About the best result you could get, considering.
I'd say try the Artemis rom, but that will require spl 3.03.hspl, and occasionally the stuck radio issue messes with changing spl,,
Not so sure about your stuck radio theory, I have been able to change the radio without an issue.
I will give Artemis rom a go.
thanks for all the support.
Merry Christmas
Bixx