Related
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference
First of all sorry for my english not good.
Start : with my HD2 have brick after task29 and not success to flash new ROM I'm take USB. cable out and try to open my HD2 in to boot loader by put volum down + power bottom but screen not show any image or 3 color my phone it only long vibration pull battery out waiting 30 minute and put battery in and try to open my phone to boot loader but is same only long vibration.
Now : can not do any think with it when try to plug power in my phone is auto startup and long vibration.
I'm search on google and in this forum not have some one face problem same as me please help me to fix this.
Any body please help me, I'm love it because now we can run both WM. and Android
Upppp waiting for your help
Did you try a long press of the reset-button?
You could try to put the original Stock Image from HTC onto the root-folder of your SD-Card, rename it to LEOIMG.nbh and Push Vol up + Vol down during start and follow the on-screen instructions if it works.
Otherwise use Search-Function in the forum.
ı have jtag HTC for samsung and HTC devices if u want send for repair to me..
www.sevgigsm.net/forum
admin..
I use ORT
Did you check to make sure your radio version was correct before flashing? This is probably the number one reason for bricking.
Check this thread it may help you if you did the flash properly:
http://forum.xda-developers.com/showthread.php?t=668347
i got same problem now...
no screen, no boot, vol down+ power oso same
no screen just a long vibration
anybody help?
I am using the correct radio so don't tell me I am using a wrong radio or something, I have been flashing for 4 months so I know EXACTLY how to flash.
now i can neither get into tri-color or hard reset so don't tell me to flash or smth like that, just tell me how to recover properly
Don't tell us to use search or something because seems like only 2 of us is encountering this problem in the internet
I'm exactly the same problem as TS coz it juz auto go vibrate when plug in battery
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
at the long vibrate, when i plug in to my pc, it will keep on got usb connected and disconnected sound
and dont know what device is connected as not shown in found new hardware and device manager
I also have been searching all possible keywords about what me and TS encountered but all linked to completely UNRELATED results(like search for long vibrations only link to people asking how to make vibration long and 1st result is this thread)
bountygiver said:
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
Click to expand...
Click to collapse
Silly question, but are you holding (and keep on holding) the Volume-Down button while you press the power button?
of course YES
i told you i have been flashing for so long
Leo from T-Mobile. Hi! I've got same problem. After flashing new (next) rom phone definetely died. Phohe is currently simfree and with HSPL. Only one reaction is short vibration after press power button. I searched everywhere. My phone has no bootloader but system see him as Qualcom CDMA Technologies MSM. Thats all, any ideas? Please and thanks for advice.
czaruch said:
Thats all, any ideas?
Click to expand...
Click to collapse
Yes, you flashed a non tmous stock rom that included a ..51.. radio and it destroyed your phone.
What rom? exact filename please.
thank you so much.
I bricked a Leo with the .51 radio. I think I read that is a European or otherwise foreign radio. Since your ROM has Euro in the name.......
czaruch said:
ROM_Leo_HTC_WWE_EastEurope_1-66.
Click to expand...
Click to collapse
The full filename for that rom is
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Si gned_15.32.50.07U_2.07.51.22_2_Ship.exe
it comes with a version x.xx.51.x radio, and they do Not work on tmous (t mobile us) phones. They kill them
Your phone is dead, sorry. No known fix.
warranty or repair (or JTAG if you are brave and have the money)
a friend of mine bricked his phone. he then tried to microwave it, but that didn't work after that he took a power wire from an old computer, cut it and connected it directly to the phone's parts where the battery would go...this completely f-ed his phone up (he also used a lighter to fake a powersurge of the battery). Then he called htc and a few weeks later he got a new hd2!
GOOD LUCK
lol, he doesnt need to do any of that, its allready as dead as it can be. Loads of epople have had them replaced under warranty with this kind of brick. It wont start, so htc/tmo cant see that its been hacked.
Hi! I understand and realy sad. Somebody know where could I fix it in UK? And how much for this pleasure. Thanks.
i would contact htc, see what they have to say. (dont say you flashed it, it just stopped working")
Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end